Switchers & Dimmers By Blackt Electrotech

• Voltage 230 Volt AC 50/60 Hz
• Voltage rating : 16 Amps
• Setting type : Dial
• Output type : NO/NC pole

• Detection Angle: 360/ Rated Load: 1200Watt/Ideal
• Installation Height: 2 - 4 Meters...This Microwave Motion Sensor Reflects The Latest Development In Interior Lighting Technology And Provides Close To Zero Energy Wastage In Terms Of Lights Being On Unnecessarily./ Hf System : 5.8Ghz Cw Radar,Ism Band
• Adjustable Function: Time Delay (10 Sec To 15 Min), Light Setting (10-2000 Lux)
• This Microwave Motion Sensor Reflects The Latest Development In Interior Lighting Technology And Provides Close To Zero Energy Wastage In Terms Of Lights Being On Unnecessarily.
• Simple in Connection: (Connect : L & N to Power) and (Connect : N & A to Load)

• It uses light sensor to automatically control on and off times of load according to the light situation. This photocell switch can be used to control load at night and can be used to load garden lights, street lights, incandescent lamps, led lamps and so on.
• Waterproof function makes it ideal for both indoor and outdoor use
• It is made from high quality material and it is easy to operate and install
• Blackt is one of the leading brands in the field of auto-sensor lighting products. products are covered by a 18 months warranty against manufacturing defects.
• Voltage: ac 220-250v| Rated current: 6 amp| Switching frequency: 50hz/60hz.

• Reliable day-night sensor: The Blackt Electrotech BT31P4 features a high-quality photocell day-night sensor, ensuring automatic activation and deactivation of street lights and garden lights based on ambient lighting conditions.
• Wide operating voltage range: With an operating voltage range of AC 220-250v and a frequency of 50hz-60hz, the Blackt Electrotech BT31P4 is compatible with standard power supplies, providing reliable and consistent performance.
• Optimal ambient light detection: The BT31P4 is designed to detect ambient light levels between 5-15 lux, ensuring accurate activation and deactivation of lights based on the surrounding lighting conditions.
• Suitable for various environments: With an IP65 rating, the Blackt Electrotech BT31P4 offers excellent protection against dust and water ingress, making it suitable for outdoor applications such as street lights and garden lights.
• Durable and weather-resistant: Designed to withstand harsh weather conditions, the BT31P4 has a working temperature range of -20~+40 degc and a working humidity level below 93% RH, ensuring reliable operation in different climates.

• Wide Detection Range: The sensor has a detection range of 180 degrees and a maximum detection distance of 10-12 meters.
• Easy Installation: The wall-mounted sensor is easy to install and can be mounted at a height of 2.2-4 meters.
• Adjustable Lux Settings: The Lux settings can be adjusted between 3-2000, making it ideal for use in different lighting conditions.
• Suitable for Various Loads: The sensor can be used with a variety of loads such as incandescent lamps, LED lights, CLFs, fans, and more.
• Adjustable Delay: The delay time can be adjusted between 10 seconds and 7 minutes.
• Low Power Consumption: The device has a static power consumption of only 0.1W and a working power consumption of 0.4W.
• High Motion Detection Speed: The motion detection speed ranges from 0.6 to 1 meter per second.
• Works by Receiving Human Motion Infrared Rays: The PIR sensor detects movement by receiving human motion infrared rays, making it highly accurate and efficient.

• The Blackt Electrotech 4 Channel RF remote control switch is a reliable and high-quality product that is perfect for a wide range of applications, from homes and hospitals to offices, shops, and restaurants.
• With four channels, this switch provides you with versatile control options for up to four different devices or areas, giving you greater flexibility and convenience.
• The receiver operating voltage is 230 volts, ensuring that it can handle a range of different loads and devices, making it perfect for a variety of applications.
• With an output wattage of 300 watts per point, the switch is capable of providing powerful and reliable control over your devices, ensuring that they work when you need them to.
• The transmission distance of 30 meters gives you greater control over your devices, allowing you to operate them from a distance without having to be in the same room or area.
• Whether you are using it in your home or at work, the Blackt Electrotech 4 Channel RF remote control switch is a reliable and convenient solution that provides you with the control you need over your devices and areas.

• (5 pic Pack) Warranty:18 Months Manufacture from 1 Aug 17. Warranty Service : Replacement.
• --- New Product: http://www.amazon.in/dp/B074T7Y5PSLOAD--- CAPACITY : 1000 WATTS,WIDE LIGHT SENSOR/ BEST USE for OUTDOOR USAGE
• Light turn on in the dark and turn off on daytime, intelligent sensor, no need to operate by manual.
• Working : As shown in the above diagram out of three wire's Red : Load, Blue : Neutral & Brown : Phase. Connect Red & Blue to Load Application where using (i.e. Lighting) & Brown and Blue to 230 VAC input supply. Now it is ready to operate Day/Night mode. For testing keep torch over to the Photocell load will turn ON.
• Automatic Sensor Light Control Switch/ It can use Street Light, Garden Lights, Incandescent lamp, LED lights. If you have any query fell free to contact us. Blackt Electrotech Official site . www.blackt.in packing is tested before dispatched so that the item reaches to the buyer safely and undamaged.

• Its 2 to 5 business day's gives in available to select pincodes/ control both tank underground tank to overhead tank fully automatically
• Save electricity and easy installation and 12 months warranty +package contains:1 water level controller unit, 6 pic sensors probes (For upper and down tank), 1 user manual with all technical details,
• It can use with suitable up to 2hp motor and suitable for single phase mcb starter panel, submersible motors and jet pumps
• It can use with overhead tank and under ground tanks or overhead tank only
• Dry run protection. Corrosion less sensors. Manual/auto/off modes. In auto mode: ( auto motor on and auto off) . Manual mode: (motor pump will be constantly On). Fully automatic function (manual on and auto off function). It works very long life. Easy to install. Used advanced embedded technology
• Switches on the Pump when the water in the Overhead Tank goes below the Pre-decided minimum level.
• Switch OFF the Pump when the water Level in the Overhead Tank Reaches the Maximum Level therefor Prevents Overflow.
• Switches OFF the pump when the water Level Reaches the Minimum Level in the Under Ground Thank therefor prevents Dry Running.
• Low Maintenance.
• No more overflow or Dry Run thus Saving Water Electricity & Manpower.
• Increase the Pump set life.
• Switch on & OFF automatically.
• No current/Voltage is passed through Water, therefore No Electrolysis Salt Deposition.
• Corrosion less
• Sturdy and durable need not maintain.
• No current/Voltage is passed throughout water level Water, therefore No Electrolysis Salt Deposition.
• Long Life (More than 9 Million Operation)
• Rust Proof
• It can be used in Hard water.
• Controller Unit Size: 2.9 inch(W) x 3.3 inch(H) x 1.9 inch(D)
• Float Switch Sensor: 2 Units
• Installation Brochure

• Both Manual and Remote ON/OFF (With ON LED indication)
• Long Life/Highly durable/ Inbuilt Memory .
• Package Contents: 3 -Piece Remote Switches for 3 Lights & for 1 Fans and Remote
• 12 Months Replacement warranty.
• Relay based Ckt. Humming less Fan Speed. Customer care Mb/Wapp: 9657707702

• Warranty:18 months manufacture from 1 aug 17
• Capacity : 1000 watts,wide light sensor/ best use for outdoor usage
• Light turn on in the dark and turn off on daytime, intelligent sensor, no need to operate by manual
• Working : as shown in the above diagram out of three wire's red : load, blue : neutral and brown : phase. Connect red and blue to load application where using (i.e. Lighting) and brown and blue to 230 vac input supply. Now it is ready to operate day/night mode. For testing keep torch over to the photocell load will turn on
• Automatic sensor light control switch/ it can use street light, garden lights, incandescent lamp, led lights

• What is : (1) it can use 4+1 and 8+2 if you have 2 units (by long pressing 1 and 5 buttons)... (2) warranty increased 18 months (Applicable from 1 Aug 17).... (3)composite pcb... (4)fan speed and heating problem solved
• Made in indian /save electricity/ inbuilt memory/ use for 4 lights and 1 fan/ humming less fan speed/ highly durable/fluctuation less switching for lights/ relay based switching (1000 Watt per pt)
• No need to change existing wiring, it can be install inside or outside switch board (i.e. keep outside only sensor)
• Operate through remote control as well as from your existing switch board buttons manually. Your suggestions is very important to update this product time to time , please leave msg official site or here

• Product Size : 5.5 x4x 2.5 cm Adjustable Function: Time delay (8 Sec to 12 Min), Sensitivity (1-8m Radii), Light Setting (2-2000 Lux)
• 18 Months Mfg Warranty
• Detection angle: 360/ Rated load: 1200Watt/Ideal installation height: 2 - 4 m. This microwave motion sensor reflects the development in interior lighting technology and provides close to zero energy wastage in terms of lights being on unnecessarily./ HF system : 5.8GHz CW radar,ISM band,,,Connection Point : L:- Phase/Line, N - Neutral i.e. (commaon for Both I/p and O/p) and L':- Load/to light
• This microwave motion sensor reflects the development in interior lighting technology and provides close to zero energy wastage in terms of lights being on unnecessarily
• Home
• Office
• Shops
• Hospitals
• Bathroom
• Corridor
• Step
• Parking area & etc
• Operating Volt: AC 220-250V 50Hz-60Hz.
• Load power: Upto 1200W Max
• Ambient Light: 3-2000Lux (Adjuestable)
• Load type: Incandescent lamp, LED light, CFL, fans, etc
• Reach:1-8m(radii.), adjustable, Detecting Angle: 360 Degree.
• HF system: 5.8GHz CW radar,ISM band
• Detecting distance: 0~8M, Installation Height: 2.2-4 Mtr
• transmission power:<10 mW
• Motion Detection Speed: 0.6~1 m/s, Delay: 8 Seconds -12 Minutes (Adjustable)
• Power Consumption (static) & 0.4(Work)
• 1 x Microwave Sensor unit
• 1 x Installations Manual
• 2 x Mounting Screw
• Bill

• It can use with lamps, incandescent lamps (bulbs), old-fashioned fluorescent lamps, electronic fluorescent ring lamps, spotlights, transformers, small electrical appliances, and other all other appliance
• Good solution for energy saving and easy in installation. and Delay adjustment: 10 Seconds - 7 Minutes and Adjustable Lux: turn on the lights during the day or night
• Using the automatic control product of infrared technology,when people walk into the sensor range,and the sensor can detect the spectral change of the human body infrared ray,during this time,the switch will connect the load automatically until the person leaves the sensor range. 2, Through the photosensitive control, it will not turn on the lights in the daytime or light environment, but also can be adjusted in any lighting environment sensing lights
• Sensitivity adjustable: turn on lights during day or nights
• Home
• Office
• Shops
• Hospitals
• Bathroom
• Corridor
• Step
• Parking area & etc
• Operating Volt: AC 220-250V 50Hz-60Hz. Loa
• d power: Upto 300/1200W MaxAmb
• ient Light: 3-2000 (Adjustable)Loa
• d type: Incandescent lamp, LED light, CLF, fans, etcDet
• ecting distance: 0~7M Det
• ecting Angle: 360 Degree, Motion Detection Speed: 0.6~1 m/s Ins
• tallation Height: 2.2-4 Mtr Pow
• er Consumption:0.1W (static) & 0.4(Work)Wor
• king Humidity: less than 93%RHDel
• ay: 10 Seconds -7 Minutes (Adjustable)
• Keep Sensor unit 1.6 Mtr higher from the ground level.
• The light, such as incandescent lamp which emits high heat should be kept from the switch aways, or it will be turn on/off voluntarily.
• On being fixed to the wire first time, the switch' initialization will take 1-2 minutes. It's natural for the switch to turn on/off voluntarily.
• When you install the switch on daytime, the Default State of the switch will make the light off.Keep the detector of the switch from illumination, & then the light will turn ON. The darker, the switch will be more sensitive. If it is not very sensitive, turn the yellow port counterclockwise with a long and thin tool to get a proper light sensitivity.
• 1 x Infrared Switch Board
• 1 x Wall /Ceiling fitting Plate
• 1 x Installations Manual
• 2 x Mounting Screw
• Bill

• Please check before buying >> Sold and fulfilled by 'Blackt Electrotech'. Warranty is not cover buying from \"Other Sellers\". Original product listed & Sold by Blackt Electrotech's only.
• Warranty : 18 Months, Type : Replacement Against Mfg defects from 1 Aug 17
• BEST USE for OUTDOOR USAGE/LOAD CAPACITY : 1000 WATTS/10 AMP,WIDE LIGHT SENSOR ADJUSTMENT FROM 5 LUX TO 50 LUX
• Easy Connection with just two wires.
• Fully Automatic switching on and off operation.

Popular Categories on BuyBestBrands.in