IPCamPower POE Combiner Splitter Adapter, Run 2 IP Cameras on 1 Cable

By Brand : IPCamPower

Mrp Price :

6999

Price : Price

4230

You Save :

-40%

Avg Customer Reviews :

Product Description :

The IPCP-212 is just another useful tool from the folks over at IPCamPower. This POE splitter combiner can serve 2 purposes. The first purpose, which will typically be the most widely used application, is to simply run 2 IP camera on one cable. Lets say you installed an IP camera in a room, and you spent alot of time running a network cable from your switch to the IP Camera, only to find out that you need to install another IP camera in the same room. Should you run another network cable from the new camera to the switch? No! Because with the IPCP-212, all you need to do is put the "receiver" end near the old camera, and run a short cable from the receiver to the new camera. Then on the switch end, just plug the sender into 2 open ports on the switch. Now power and data gets sent over one network cable all the way to the receiver. Thus significantly reducing your burden of fishing another wire through multiple walls. There is also a very useful 2nd type of scenario that you can use these for. Have a power hungry IP Camera? Lets say you have a camera that requires 30 watts of POE power, yet your switches ports can only max out at 15 watts per port. No problem. Simply plug in the "sender" into 2 open ports on the switch, and connect it to your cable that is going to your camera. Boom! Now the camera will pull 30 total watts from your switch to effectively power your camera (15 from each port). You can even power a 60 watt device as long as your POE switch has the ability to push 30 watts per port.

Product Details :

Brand : IPCamPower
Manufacturer : IPCamPower
Package Dimensions : 14 x 9.3 x 3 cm; 100 Grams
Wattage : 15 Watts
Batteries Included : No
Batteries Required : No
Manufacturer : IPCamPower
Country of Origin : USA
Item Weight : 100 g

Product Features :

Allows you to run 1 cable run to the switch for 2 cameras that are near each other. Set consists of a \"sender\" unit and a \"receiver\" unit. Plug Sender unit into 2 open ports on your POE switch. Run one cable to the location that has the cameras that are nearby each other. Connect 2 short cables to the Receiver unit and connect the other ends to your camera. Done!
Reduces cabling costs. Lets say you are installing 2 cameras on each side of a corner. Instead of running 2 cables back to the switch, you can now just run 1. Easy and Cost Effective.
Ever installed a camera in a location, only to find out that you need another one right by it? Whats worse, the switch is on the other side of the building and it took you hours to run that one cable run. No worries! Just use this splitter set to make your installation much easier as all you need to do now is run 1 cable from the old camera to the new camera.
The Receiver Unit comes with weatherproof RJ45 connectors, allowing you to fully expose the Receiver unit to the weather elements.
Optional Bonus Use for power hungry cameras. Lets say you have a camera that requires 30 watts of power, but your POE switch is only able to push 15 watts of power on each port. No problem! Simply plug one sender unit into 2 open ports on your switch. Plug the receiver unit into the one camera. This will effectivelly combine the 15 watts from each port and send 30 watts of power down one cable to your camera.