Solar Panels By SolarCell

SolarCell 30A USB Solar Panel Battery Regulator Charge Intelligent Controller 12V/24V - Product Features
  • Works with 12V or 24V Battery. Refer Image for detailed Manual.
  • 1. Build-in industrial micro controller. 2. One-key setting,LCD display,auto memory function. 3. Fully 3-stage PWM charge management. 4. Build-in short-circuit protections,open-circuit protections,reverse protections,over-load protections. 5. Dual MOS Reverse current protections ,low heat productions.
  • Current 30A, With Timer and light sensor,it could work for solar light system.
  • 1. Make sure your battery has enough voltage for the controller to recognize the battery type before first installation. 2. The battery cable should be as short as possible to minimize loss. 3. The regulator is only suitable for Lead Acid Batteries: OPEN,AGM, GEL. It is not suited for Nickel Metal Hydride, Lithium Ions or Other Batteries. 4. The charge regulator is only suitable for regulating solar modules. Never connect another charging source to the charge regulator.
  • 1. Connect the battery to the charge regulator - plus and minus.it will show 1 ,if it detects 12V battery, 2 if it detects 24V battery. 2. Connect the photovoltaic module to the regulator - plus and minus. 3. Connect the consumer to the charge regulator - plus and minus. The reverse order applies when deinstalling! An improper sequence order can damage the controller!
 


Facebook Twitter Instagram LinkedIn
© 2018 - BuyBestBrands.in All Rights Reserved
hit counter