Boltune Bluetooth 5.0 Transmitter and Receiver, 2-in-1 3.5mm Stereo Aux Adapter, Low Latency with aptX/AAC, 2 Devices Simultaneously, for TV/Home Sound System, Pairs Two Headphones

By Brand : Boltune

TX mode: In the TX mode, the Bluetooth transmitter can be used to stream audio from non-Bluetooth audio sources such as non-Bluetooth TVs or CD players to Bluetooth headphones/speakers. This transmitter is supported to SPDIF connectors and AUX connectors, therefore, please kindly check whether your audio sources have one of these jacks. Transmitter -> Bluetooth-enable your TV, PC, AV receiver, TV Box etc. Stream audio to any Bluetooth headphones / speakers, e.g. Bose, Beats, Sony, Plantronics, Boltune, Apple AirPods headphones. RX mode: In the RX mode, the Bluetooth adapter could be used as a Bluetooth receiver to non-Bluetooth stereos such as wired headsets or wired speakers. Pair the Bluetooth receiver with your cell phone and plug your headsets into the jack on this unit, then you will be able to hear the music from your phone. Receiver -> Bluetooth-enable a wired speaker, soundbar, home theater etc. Receive audio wirelessly from any Bluetooth audio device e.g. PC, mobile phone, Echo, Echo Dot, etc. Technical Specification: Bluetooth specification: Bluetooth 5.0 Operation range: UP to 10 meters Charge time: 2 hours TX working time (aux): 30 hours RX working time (aux): 19 hours TX working time (SPDIF): 28 hours RX working time (SPDIF): 17 hours NOTE: 1. If the transmitter could not pair with the headphones/speakers successfully, please reset both the transmitter and the headphones/speaker. 2. The transmitter supports apt Low Latency codec. apt Low Latency supported headphones/speakers are also required for the audio to be encoded via this codec. 3. aptX Low Latency does NOT support Dual Pair mode.