Lenses By iShoot

• This lens tripod mount ring is tailor-made for Nikon AF-S NIKKOR 200-500mm f/5.6E ED VR; lightweight design of hollow, with stainless steel screw, net weight is about 240g;
• The lens collar is made of high quality Aviation Aluminum, lightweight and solid; precisely machined by world-class high-end CNC turning center, surface anodic oxidation; appearance and exquisite workmanship is much better than similar products made by mold;
• The lens support is referencing to and modified from Nikon original standard design. Integrated design, non-slip knob is larger, reserved finger position. The inner diameter of the tripod ring is about 79.5mm, the width is about 23mm, with 3M film inside for protecting the lens from scratches, can be freely rotated 360 degrees;
• The bottom of the lens bracket is 85mm detachable lengthening quick release plate, with 1/4? and 3/8? screw holes and stainless steel studs at the bottom;
• This lens holder bottom is 39mm Arca-Swiss fit Quick Release Plate, compatible with RRS / ARCA-SWISS / PMG / WIMBERLEY / MARKINS / PHOTOCLAM / SUNWAYFOTO / BENRO / SIRUI / MARSACE / ISHOOT ball head of Arca 39mm fit, suitable for iShoot IS-JZ30 / IS-JZ50 / IS-JZ64 / IS-QJ58 / IS-QJ64-FD / IS-JZ60BK / IS-JZ70MFT / IS-JZ80BK.

• This lens collar replacement foot is tailor-made for Sony FE 200-600mm f/5.6-6.3 G OSS Lens SEL200600G; the tripod mount ring base is adopted the original interface standard, added quick release plate feature to the bottom, more practical than similar lens collar replacement base;
• The lens support stand adopts lightweight design of hollow, with stainless steel screw, net weight is about 100g; it is about 105mm long, 65mm wide and about 33mm high;
• The bottom of the lens bracket base is 105mm detachable lengthening quick release plate, with 1/4? and 3/8? screw holes and stainless-steel anti-slip screws at the bottom;
• The tripod collar mount ring stand is made of high quality Aviation Aluminum, lightweight and solid; precisely machined by world-class high-end CNC turning center, surface anodic oxidation; appearance and exquisite workmanship is much better than similar products made by mold;
• This lens holder foot bottom Quick Release Plate is 39mm Arca-Swiss fit, compatible with RRS / ARCA-SWISS / PMG / WIMBERLEY / MARKINS / PHOTOCLAM / SUNWAYFOTO / BENRO / SIRUI / MARSACE / ISHOOT ball head of Arca 39mm fit, suitable for iShoot IS-JZ30 / IS-JZ50 / IS-JZ64 / IS-QJ58 / IS-QJ64-FD / IS-JZ60BK / IS-JZ70MFT / IS-JZ80BK.

• 1. The lens collar is designed and improved with reference to Sigma original TS-111; the tripod collar is tailor-made for Sigma 100-400mm f/5-6.3 DG DN OS (E-mount) & Sigma 105mm f/1.4 DG HSM Art (EF/FX/FE/L-mount), can't be used for other lenses;
• 2. The net weight of the tripod mount ring is about 170g, inner diameter is about 82mm, width is about 18mm, the inner wall has grooves and notches, and 3M plastic protective film is attached; locking knob with non-slip design?
• 3. The tripod collar bottom is added 65mm long Arca fit quick release plate feature, can be used with 39mm Arca-swiss fit tripod ball head, panoramic head and clamp directly; more practical than lens collars without dovetail groove;
• 4. The Lens support bottom reserved 1/4\" and 3/8\" screw holes and stainless-steel anti-slip screws for fixing lens to tripod directly;
• 5. The tripod ring is made of Aviation Aluminum, CNC precisely machined, hollow-out weight reduction design, polished and surface anodized finish. The appearance and exquisite workmanship are much better than similar products made by mold. (Note: The other items in the photos not listed here are for illustrating only, not included)

• 1. The long-focus lens support?s main body made of aviation aluminum, CNC precisely machined, surface oxidation treated; weight bearing joints and screws made of 304 stainless steel, weight about 140g;
• 2. The distance of the screw holes connecting quick release plate is about 23mm; with three joints with damping, foldable and retractable; camera screw chute is about 29.5mm;
• 3. The telephoto lens bracket can be used with iShoot quick release plate QS-120, QS-220, or QS-350 (Sold Separately), installed between long-focus lens and camera body, sharing the weight of the camera mount, to protect long- focus lens and camera mount from damage, but also increase stability.
• 4. Package Includes: 1 x iShoot Long-Focus Lens Support IS-TB01 (Note: the other items in the photos not listed here are for illustrating only, not included)

• This lens collar is tailor-made for Sony FE 135mm f/1.8 GM, Sony E 70-350mm f/4.5-6.3 G OSS, Sony E 16-55mm f/2.8 G, Tamron 28-75mm f/2.8 Di III RXD FE Mount, Tamron 17-28mm f/2.8 Di III RXD FE Mount; quick release plate feature is added to the bottom, more practical;
• The lens support adopts lightweight design of hollow, with stainless steel screw, net weight is about 150g; the inner diameter of the tripod ring is about 62.5mm, the width is about 18mm; positioning by the switch and bayonet. Cannot be rotated. All corners of the lens collar are grinding rounded, with 3M film inside for protecting the lens from scratches;
• The bottom of the lens bracket is 55mm detachable quick release plate, with 1/4? and 3/8? screw holes and stainless-steel anti-slip screws at the bottom;
• The tripod collar mount ring is made of high quality Aviation Aluminum, lightweight and solid; precisely machined by world-class high-end CNC turning center, surface anodic oxidation; appearance and exquisite workmanship is much better than similar products made by mold;
• This lens holder bottom Quick Release Plate is 39mm Arca-Swiss fit, compatible with RRS / ARCA-SWISS / PMG / WIMBERLEY / MARKINS / PHOTOCLAM / SUNWAYFOTO / BENRO / SIRUI / MARSACE / ISHOOT ball head of Arca 39mm fit, suitable for iShoot IS-JZ30 / IS-JZ50 / IS-JZ64 / IS-QJ58 / IS-QJ64-FD / IS-JZ60BK / IS-JZ70MFT / IS-JZ80BK.

• 1. This lens collar is tailor-made for Canon EF 28-300mm f/3.5-5.6L IS USM lens and Canon EF 70-300mm f/4-5.6L IS USM lens, can?t be used for other lens; laser scanning technology is used to accurately obtain the lens parameters, and then the shape of the inner diameter of the lens support is accurately carved based on the data.
• 2. The lens support is referencing to and modified from Canon original standard design, bearing is enhanced, details are improved, and added the features of quick release plate, more practical; the weight of the tripod mount ring is about 165g, inner diameter is about 80mm, ring width is about18mm; bottom is added quick release plate of about 76mm long, with 1/4\" and 3/8\" screw holes.
• 3. The tripod mount ring is made of high-density Aviation Aluminum; precisely machined by world-class high-end CNC turning center and hollowed-out carved by diamond combined cutter heads; adopting vibration polishing technology, which improves grinding precision by 20% than manual; multiple anodized, which improves the fineness and uniformity of the color of the metal surface by 10%; the appearance and exquisite workmanship is much better than similar products made by mold.
• 4. This lens support bottom is AS standard quick release plate, compatible with RRS / ARCA-SWISS / PMG / WIMBERLEY / MARKINS / PHOTOCLAM / SUNWAYFOTO / BENRO / SIRUI / MARSACE / ISHOOT tripod ball head of Arca 39mm fit, suitable for iShoot IS-JZ30 / IS-JZ50 / IS-JZ64 / IS-QJ58 / IS-QJ64-FD / IS-JZ60BK / IS-JZ70MFT / IS-JZ80BK clamp.
• 5. Package Includes: 1 x iShoot Tripod Mount Ring IS-C730PB (The other items in the photos not listed here are for illustrating only, not included.)

• 1. The lens collar is tailor-made for Sony FE 70-300mm f/4.5-5.6 G OSS Lens, can't be used for other lenses.
• 2. The tripod mount ring's inner diameter is about 82mm, width is about 23mm, with 3M film inside, preventing lens from scratches; net weight is about 170g.
• 3. The tripod collar bottom is added 75mm long Arca fit quick release plate feature, can be used with 39mm Arca-swiss fit tripod ball head, panoramic head and clamp directly; more practical than lens collars without QR-Plate.
• 4. The Lens support bottom reserved 1/4\" and 3/8\" screw holes and stainless-steel anti-slip screw for fixing lens to tripod directly.
• 5. The tripod ring is made of Aviation Aluminum, CNC precisely machined, hollow-out weight reduction design, polished and surface anodized finish. The appearance and exquisite workmanship are much better than similar products made by mold.

• The lens support is tailor-made for Sony SELP28135G FE PZ 28-135mm f/4 G OSS Lens; hollow-out weight reduction design, with stainless steel screw, net weight is about 205g;
• The lens collar is made of high quality Aviation Aluminum, lightweight and solid; precisely machined by world-class high-end CNC turning center, surface anodic oxidation; appearance and exquisite workmanship is much better than similar products made by mold;
• The tripod mount ring is referencing to and modified from Sony original standard design. Split structure, added strap buckle and quick release plate function; with 3M film inside the tripod ring for protecting the lens from scratches; inner diameter is about 74.5mm, width is about 17mm;
• The bottom of the lens bracket is quick release plate feature, and the length is about 90mm, with 1/4? and 3/8? screw holes and stainless steel anti-slip screw;
• Quick release plate is AS 39mm standard, compatible with compatible with RRS / ARCA-SWISS / PMG / WIMBERLEY / MARKINS / SUNWAYFOTO / BENRO / SIRUI / MARSACE / ISHOOT tripod ball head of Arca 39mm fit, suitable for iShoot IS-JZ30 / IS-JZ50 / IS-JZ64 / IS-QJ58 / IS-QJ64 / IS-QJ64-FD / IS-JZ60BK / IS-JZ70MFT / IS-JZ80BK / IS-JZ85MFT clamp.

• Made of aviation aluminium by CNC precision machining, surface processed by anodic oxidation to avoid rust
• With stainless steel screws and hollow weight design, it only weighs approximately 135g
• For Canon EF 70-200mm f/4L USM, Canon EF 70-200mm f/4L IS USM, Canon EF 400mm f/5.6 L USM and the Canon EF 80-200/2.8L lens
• Tripod ring inner diameter is about 75.5mm, it has a 1/4'' and a 3/8'' screw holes.
• 1 x iShoot C720XXB Tripod Mount Ring for Canon 70-200 f/4 USM, 70-200 f/4 IS USM

• 1. The tripod mount ring support foot is tailor-made for Canon RF 600mm F11 IS STM and Canon RF 800mm F11 IS STM, can't be used for other lenses?the measuring volume of the replacement foot is about 91mm(L) x 38.5mm(W) x 31mm(H) (without screws), and net weight is about 95g;
• 2. The lens collar stand is made based on the lens structure, the screw holes are precisely coordinated, and the anti-skid positioning pin is designed. It is locked by spring screws, with wavy handles;
• 3. The tripod collar stand bottom is added 45mm long Arca fit quick release plate feature, can be used with 39mm Arca-swiss fit tripod ball head, panoramic head and clamp directly; more practical than lens collars without QR-Plate. The Lens collar base bottom reserved 1/4\" and 3/8\" screw holes and stainless-steel anti-slip screw for fixing lens to tripod directly;
• 4. This lens collar support base bottom's dovetail groove is 39mm Arca-Swiss standard, compatible with RRS / ARCA-SWISS / PMG / WIMBERLEY / MARKINS / PHOTOCLAM / SUNWAYFOTO / BENRO / SIRUI / MARSACE / ISHOOT ball head of Arca 39mm fit, suitable for iShoot IS-JZ30 / IS-JZ50 / IS-JZ64 / IS-QJ58 / IS-QJ64-FD / IS-JZ60BK / IS-JZ70MFT / IS-JZ80BK;
• 5. The tripod mount ring base is made of Aviation Aluminum, precisely machined by world-class high-end CNC turning center, hollow-out weight reduction design, hollowed-out work processed by Multi-Diamond Cutter finely, lightweight and solid, polished and surface anodized finish. The appearance and exquisite workmanship are much better than similar products made by mold.

• 1. The tripod mount ring support foot is tailor-made for Canon RF 600mm F11 IS STM and Canon RF 800mm F11 IS STM, can't be used for other lenses?the measuring volume of the replacement foot is about 91mm(L) x 38.5mm(W) x 31mm(H) (without screws), and net weight is about 95g;
• 2. The lens collar stand is made based on the lens structure, the screw holes are precisely coordinated, and the anti-skid positioning pin is designed. It is locked by spring screws, with wavy handles;
• 3. The tripod collar stand bottom is added 45mm long Arca fit quick release plate feature, can be used with 39mm Arca-swiss fit tripod ball head, panoramic head and clamp directly; more practical than lens collars without QR-Plate. The Lens collar base bottom reserved 1/4\" and 3/8\" screw holes and stainless-steel anti-slip screw for fixing lens to tripod directly;
• 4. This lens collar support base bottom's dovetail groove is 39mm Arca-Swiss standard, compatible with RRS / ARCA-SWISS / PMG / WIMBERLEY / MARKINS / PHOTOCLAM / SUNWAYFOTO / BENRO / SIRUI / MARSACE / ISHOOT ball head of Arca 39mm fit, suitable for iShoot IS-JZ30 / IS-JZ50 / IS-JZ64 / IS-QJ58 / IS-QJ64-FD / IS-JZ60BK / IS-JZ70MFT / IS-JZ80BK;
• 5. The tripod mount ring base is made of Aviation Aluminum, precisely machined by world-class high-end CNC turning center, hollow-out weight reduction design, hollowed-out work processed by Multi-Diamond Cutter finely, lightweight and solid, polished and surface anodized finish. The appearance and exquisite workmanship are much better than similar products made by mold.

• 1. The lens collar foot is tailor-made for Panasonic Leica DG Vario-Elmar 100-400mm f/4-6.3 ASPH. POWER O.I.S., can't be used for other lenses;
• 2. The tripod mount ring base adopts the original factory standard, and the shape is redesigned, the volume is about 86 x 39 x 29mm, and the net weight is about 85g; the locking screw has a built-in spring;
• 3. The bottom quick release plate of the replacement foot is about 46mm in length, adopts ARCA-SWISS / RRS standard fit, can be used with 39mm Arca-swiss fit tripod ball head, panoramic head and clamp directly; more practical than lens collar foot without dovetail groove;
• 4. The Lens support foot bottom reserved 1/4\" and 3/8\" screw holes and stainless-steel anti-slip screw for fixing lens to tripod directly;
• 5. The tripod mount ring replacement base is made of Aviation Aluminum, CNC precisely machined, hollow-out weight reduction design, polished and surface anodized finish. The appearance and exquisite workmanship are much better than similar products made by mold.

Popular Categories on BuyBestBrands.in