Electronics Store - Electronics Products Under 100 Rupees

• Snug fit for Poco X2 with perfect cutouts for volume buttons, audio and charging ports
• Durable, soft and flexible back case
• Protects phone from scratches, falls, fingerprints and sweat
• Raised upper lip build design to help protect the screen against fall on a flat surface
• Easy to put and take off
• No Warranty

• MULTIPLE CHARGING METHOD: This module is made for charging rechargeable battery/batteries using the constant-current/constant-voltage (CC/CV) charging method, charging port can take power from micro USB. The input has a MIRCO USB socket, which can be used to directly charge with the 5V mobile phone charger, and still retains the input voltage wiring solder joints, which can be very convenient DIY....Input voltage: 4.5~5.5V
• MULTIPLE PROTECTION'S: This module is used for single lithium ion / lipo / 18650 cell or multiple cell in parallel, this board have overcharge, over discharge and overcurrent protection; battery over-discharge protection voltage is 2.5V, battery over current protection current is 3A
• ADJUSTABLE CHARGING CURRENT: The charge current can be modeled externally with the Rprog resistor R3......Default Output is 4.12V ~ 4.2V and 1AMP ....This can be connected with other module / robotics project or also or this work with other modules efficiently also like custom torch, light , solar cells, bluetooth, testers , wireless circuit, adaptors, buzzers, powerbank, camera, temperature sensor, audio circuit / headphone amplifier ...etc.
• DRIVE LOAD: Connect the battery to the B+ B-, the indicator red light is being charged and the blue light to full, OUT+ and OUT- can be connected to the load, such as the booster converter module/buck converter module or other loads.
• Important: Please note that the battery terminal should be connected correctly to their respective terminal. The ammeter for testing current can only be connected in series with the 5V input terminal of the charging board. As Charging of AA, AAA and other rechargeble battery is different so, please check with battery manufacturing company manual *

• Vehicle compatibility: universal for - all 2 wheeler
• No.1 oe switch manufacturer
• Globally among top 3 switch manufacturers
• Long life switch tested up to 3 lakhs cycles
• Every time best switching experience in all weather conditions; reliable, high quality and dependable products

• Snug fit for Xiaomi Redmi 7A, with perfect cut-outs for volume buttons, audio and charging ports
• Compatible with Xiaomi Redmi 7A
• Durable, soft and flexible back case, Tear, slip-resistant and corner protection
• Raised upper lip build design to help protect the screen against fall on a flat surface
• Protects phone from scratches, fingerprints and sweat Slim transparent case to enhance the look of your phone

• SPIRAL TUBE CHARGING CABLE PROTECTOR are designed with highly flexible silicone and can be used as phone charger cord protector and phone charger saver to completely protect cables for all devices including, cell phones, computers, laptops, apple / android watches, lightning cables, pc?s, the list goes on and on.
• Besides protecting all Your USB cables / cords, SPIRAL TUBE CHARGING CABLE PROTECTOR feels surprisingly nice and is fun to install on any wires end. Use it as your headphone cord protector or charger cable cover. Simply touching it can relieve your stress too! Yet, even better, the Lightning Cable Protector looks super cool. It doesn?t get any better than this!
• works with virtually all computer and cellphone cables. You can even use it in almost anything like as pet cable protector, chewsafe cord protector, cord protectors from pets, wire protector from pets and as a wire protector tubing for phone and computer cables.
• Spiral Tube charging Cable protector is your permanent fix to all those damaged lightning cables. It perfectly works as a cable strain relief or a critter cord so you won't have to deal with cable repair or iphone cable repair and frayed wire repair.
• Wrap the cable protector onto Your preferred cable as an iphone charger end piece. SPIRAL TUBE CHARGING CABLE PROTECTOR will wrap around any wire just like a protective sleeve would but with more mobility.

• SPIRAL TUBE CHARGING CABLE PROTECTOR are designed with highly flexible silicone and can be used as phone charger cord protector and phone charger saver to completely protect cables for all devices including, cell phones, computers, laptops, apple / android watches, lightning cables, pc?s, the list goes on and on.
• Besides protecting all Your USB cables / cords, SPIRAL TUBE CHARGING CABLE PROTECTOR feels surprisingly nice and is fun to install on any wires end. Use it as your headphone cord protector or charger cable cover. Simply touching it can relieve your stress too! Yet, even better, the Lightning Cable Protector looks super cool. It doesn?t get any better than this!
• works with virtually all computer and cellphone cables. You can even use it in almost anything like as pet cable protector, chewsafe cord protector, cord protectors from pets, wire protector from pets and as a wire protector tubing for phone and computer cables.
• Spiral Tube charging Cable protector is your permanent fix to all those damaged lightning cables. It perfectly works as a cable strain relief or a critter cord so you won't have to deal with cable repair or iphone cable repair and frayed wire repair.
• Wrap the cable protector onto Your preferred cable as an iphone charger end piece. SPIRAL TUBE CHARGING CABLE PROTECTOR will wrap around any wire just like a protective sleeve would but with more mobility.

• Durable, soft and flexible back case, Tear, slip-resistant and corner protection
• Compatible with Xiaomi Redmi Note 8
• bullet_point_3
• Raised upper lip build design to help protect the screen against fall on a flat surface
• Protects phone from scratches, fingerprints and sweat

• Snug fit, with perfect cut-outs for volume buttons, audio and charging ports
• Tear and slip-resistant, Durable, soft and flexible back case
• Raised upper lip build design to help protect the screen against fall on a flat surface
• Protects phone from scratches, fingerprints and sweat
• Easy to put and take off

• Attached to any Standard Tripod Attach to any standard tripod which has universal standard 1/4\" mounting hole screw.
• Strong Compatibility The clip holder can be expanded from 2.17\" to 3.37\" (5.5cm to 8.5 cm) wide, which made it compatible with most smart phones, such as: iPhone 8 8 Plus 7 7 Plus SE 6S 6 Plus 5S 5C 5 4s 4 as well as Samsung Galaxy S7 S6 S5 S4 S3 S2 and many other.
• Grasps your Device Firmly The clip holder will hold your device firmly, just enjoy your time while recording video, taking pictures, or to use your phone as a webcam.
• Protect your Device Thanks to the PVC rally glue, your phone screen is untouched by the tripod connector, so you don't have to worry about scratching, cracking, or leaving marks on the screen; Both sides of the card slot and the front are equipped with cushions, two-tier reinforced sponge fixture, prevent your device from falling down and anti-shock.
• High Quality Material Made from high quality Aluminum alloy and ABS plastic, not fade, not rust, extremely durable; Metal copper core of the mounting screw hole, with strong abrasion resistance and use for a long lifetime.

• Compatible with both 2.5\" and 3.5\" Serial ATA Hard Drives allows the use of newer hard drives with older power supplies
• Compliant with Serial ATA 1.0 standard
• Provides 6 inches in cable length
• Connects a Serial ATA Hard Drive to a standard internal power connector SATA (15 pin) to 4 pin Molex (LP4)

• EM-18 RFID reader module is the one the most commonly used module for radio frequency identification projects
• 126 separate 5 point terminals plus 4 horizontal bus lines (power lines) of 50 test points each
• Accepts most electronic components, including integrated circuits and transistors for digital (and or) analog circuitry

• Snug fit for Samsung Galaxy M01 with perfect cutouts for volume buttons, audio and charging ports
• Durable, soft and flexible back case
• bullet_point_3
• Raised upper lip build design to help protect the screen against fall on a flat surface
• Easy to put and take off

• Snug fit for OnePlus Nord with perfect cutouts for volume buttons, audio and charging ports
• Durable, soft and flexible back case
• Protects phone from scratches, falls, fingerprints and sweat
• Raised upper lip build design to help protect the screen against fall on a flat surface
• Easy to put and take off
• No Warranty

• Snug fit for Samsung Galaxy M10s with perfect cutouts for volume buttons, audio & charging ports
• Compatible with Samsung Galaxy M10s
• Durable design combines hard polycarbonate with a rubbery-soft, secure-grip coating
• Protects phone from scratches, falls, fingerprints and sweat
• Raised upper lip build design to help protect the screen against fall on a flat surface1.2 mm slim case with rubber oil coating/matte finish to enhance the look of your phone

• Color: Multicolour
• Included Components ? : ? House Building Small Blocks Early Learning Educational Toy for Kids Gift

Popular Categories on BuyBestBrands.in