Electronics By Electronic Spices

• Package Includes 10 pcs
• Forward Current(IF): 6A
• Maximum DC blocking voltage: 400V
• Peak Repetitive Reverse Voltage (VRRm): 1000V

• The kit contains-1 x 60W Soldering Iron, 1 x Soldering Stand, 1 x Wire Cutter , 1 x Soldering paste , 1 x desolder wire and High Quality Solder wire , 1x Tester , 1x Tape , 1x Tweezer , 1x Iron Bit , 1x desoldering Pump , 1x digital multimeter 1x screw driver 1x magnify glass 1x screwdriver set 1x pliers 1x Glue gun with stick
• This Kit best for the DIY beginners as well as for professionals
• This includes all the necessary things required for soldering on your desk
• we combine the basic tools used in general-purpose soldering work
• 17 IN 1 25WATT Soldring Iron Starter Kit With Glue gun

• AC 220-230V 50Hz
• Put the Correct Position of the battery andode and cathode to charge
• When the corresponding indicating light is on, it means the battery charging properly
• When the charging time is enough. cut the electrical source, bring out of the battery and operate
• Easy and Convenient to use

• CABLE TYPE: 2 pin. COLOR: Red and black.
• MATERIAL: Tinned copper wire, plastic head at each end.
• HIGH QUALITY AND WIDELY USE: Adopt environmental protection materials, cold and high temperature resistance, conductive, durable, widely used in electrical appliances, automobiles, robots, lighting, toys, PCB control panel, speakers, audio, batteries, toys, household appliances, etc.

• HY-4700 Model : HY-4700 Motor operating voltage : 12V DC Max. pressure : 0.8Mpa Open flow rate : 5 OL/min Max. voltage current : 3.5A
• Adapter Input voltage : 100V to 265V AC Output voltage : 14V Power rating : 2A Max. frequency range : 50 to 60 Hz Total length of the adaptor : 1.35 meter

• Don't compromise - high quality and great value
• package include :- 20pcs panel mounting micro usb black
• best for electronic projects
• Easy to apply
• Panel Mount Hole 6mm

• Working models of science projects kits
• Included 20pcs of male cables and 20pcs female cables
• Suitable as a power or a signal cable for your electronic project like LED light
• Common usage: this 3 pin connector for mini RC helicopter, indoor 3D plane, LED strips, LED wall-washers, LED belt light, curtain light, twinkle light, etc.
• Uniform insulation thickness to ensure easy stripping and cutting

• General purpose for all electronic applications and household needs
• The kit contains-1 x 60W Soldering Iron, 1 x Soldering Stand, 1 x Wire Cutter , 1 x Soldering paste , 1 x desolder wire and High Quality Solder wire , 1x Tester
• Soldering iron tools widely used for welding circuit board, appliance repair, Home DIY hobbyists,jewelry welding.You can take it anywhere and you will be able to find the tools you need in the carry bag.
• Soldering irons are most often used for installation, repairs, and limited production work in electronics assembly.

• Make Any Speaker Wireless, Make your Car Audio System Wireless
• Convers Speakers into Bluetooth Speakers
• Input Volt - 5 V DC, Audio Out : L R G (it must be connected to amplifire)
• Allows you to play songs to your speakers directly from your phone, Compact and Small can be powered with usb wall power adapter

• The shell is made of high quality PE insulating fireproofing material
• The screw terminal block conductive performance is high, the insulation performance is good
• Pressing sheet is high quality conductive steel spring, good elasticity, strong toughness. Energy saving, corrosion resistance, high quality and safety.
• Using push type connectors only process 3 steps: hold down the item and press the terminal, and then put the peeled wires into the terminal, finally loose hands and finish the connection

• Working voltage? :? 5V
• Support? :? mp3/bluetooth/USB/aux/FM/memory card
• Excellent sound
• Convenient
• Cheap and easy to install

• 2.1 channel - 100 watt home theater audio board.
• Pleasent sound and bass boosted.
• The wiring is very simple, especially for beginner
• Package Includes - 1pcs amplifier board
• Transistor is a 2.1 channel audio power amplifier with in-built dual channels which enables for stereo and bridge amplifier applications

• Ultrasonic Ranging Detector Mod HC-SR04 Distance Sensor (Blue)
• HC-SR04 Arduino ultrasonic sensor can send eight 40 kHz and detect whether there is any pulse signal back.If it back, a high level signal will be outputed by IO, and the duration of the signal is the time from sending ultrasonic to returning.
• The modules includes ultrasonic transmitters, receiver and control circuit.
• There are 4 pins out of the module : VCC , Trig, Echo, GND. So it's a very easy interface for controller to use it ranging.
• The sensor is small, easy to use in any robotics project and offers excellent non-contact range detection between 2 cm to 400 cm (that?s about an inch to 13 feet) with an accuracy of 3mm. Since it operates on 5 volts, it can be hooked directly to an Arduino or any other 5V logic microcontrollers.

• ac voltage display input voltage range is AC 20-500V, measuring voltage range is AC 20-500V, voltage measuring error is 2V, working environment temperature range is -40-55?.
• It can be used as signal indication, warning signal, accident signal and other signals in the line of electric power, telecommunication, machine tool, ship, textile, printing and mining machinery.
• The lampshade of the voltmeter is made of high strength polycarbonate, has good impact resistance, built-in screw-type wiring, which makes more safe and convenient terminal.
• The volt panel is with long service life, low energy consumption, small size(490x270mm), light weight features.
• Package includes one mini digital voltmeter its color is RED

Popular Categories on BuyBestBrands.in