Industrial & Scientific Store - Additive Manufacturing Products

• WOL3D is the exlusive Distributor of Creality LD-002H 3D Printer in India
• FAST PRINTING AND LONGER LIFESPAN - Creality LD002H 3d resin printer uses a 6 inch monochrome LCD of 2K HD with 2560x1620 resolution, only taking 1-4s/layer exposure to cure resin, which could significantly increase your printing efficiency and save your time. Moreover, monochrome LCD has a much longer lifespan and stable performance during long-time printing.
• ULTRA ACCURCY PRINTING - This resin printer equipped with a UV integrated light source module and upgraded transmission system, working together with 2K mono LCD, the light source can reache 8000uw/cm2, which greatly improve the printing precision and details.
• AIR FILTRATION SYSTEM WITH ACTIVATED CARBON - The SLA 3d printer is built in air filtering system. There is a small box at the rear of the print chamber containing a pouch of activated carbon, which can absorb the fume of the exposed resin and offer you a refreshing printing experience.
• CHITUBOX SLICING SOFTWARE - This lcd 3d printer installs the latest version of CHITU BOX Slicing Software, which supports one-key to add the model support and adjust the modeling size, easy to achieve all functions you want.
• BETTER USER EXPERIENCE - LD002H dlp 3d printer adpots user-friendly 3.5 inch full-color touch screen UI design interface can monitor real-time printing information, easy to operate. Lower the print platform and keeping only a distance of a piece of paper, then lock the leveling nut to finish the leveling, saving much time than before.

• Feature: The subminiature PCB micro switch is made of nylon 66 and metal.The terminal is brass with sliver plated.Housing color is black.The pin is PCB terminal.
• Function: Subminiature PCB micro switch with 3 pins, SPDT design (1NO + 1NC) momentary.Actuator forms is middle hinge lever.The rating is 1A 125VAC.
• Overall Size: 0.5*0.23*0.51 inches (12.8*5.8*12.9 MM).Terminal size: 0.035*0.024 inches(0.9X0.6 MM).
• Long service life: Mechanical Life is more than 100,000 cycles.Operating Temperature is -25~+85.The operating force 0.75N.
• Application: Subminiature PCB micro switch is widely applied to home appliances, audio, toys, mouse, business machines, communication equipment and other electronic equipment

• Bore Diameter : 2.0mm
• Screw Size : M6
• Length :25.1 mm
• Material : stainless steel (All metal no teflon tube)
• For Filament : 1.75mm

• Belt type : GT2
• Width : 6 mm
• Pitch : 2 mm
• Color : White
• Material : Polyurethane (PU) with steel core

• High surface quality: Compared with the use of grinding wheels or other deburring tools, the machining surface has high smoothness because the tool uses sharp cutting edges for cutting. More convenient to remove the appearance of 3D printing
• With 360 degree rotation,the blade of this metal deburring cutter is gonna meet all the angles,especially the hard-reach corner. Quickly remove burrs from nylon, ABS and PLA without melting the filament
• Anti-Slip Handle allows for not only blade storage but a comfortable grip that enables long use without discomfort. Ideal for any 3D printing jobs
• Easy to use and cost-saving: The tool is small in size, can be carried around, can replace the blade with a simple button, and does not use electricity and compressed air, saving energy, thereby saving costs.
• Wide processing range, strong applicability :According to different processing materials, the use of different materials of the blade, can process stainless steel, aluminum alloy to rubber, plastic material range.

• Material: ABS
• The filament is for 3D printing pen or 3D Printer and used to melt plastic at a high temperature.
• Length: 20 meter; Diameter: 1.75mm
• Color: Red ; Temperature; 240 degreeC - 260 degreeC; Heatbed Temperature: 80 degreeC (min)
• Note: Due to light and screen difference, the item's color may be slightly different from the pictures. Please allow 10-50mm deviation due to manual measurement.

• Six different step resolutions: full-step, half-step, 1/4-step, 1/8-step & 1/16-step
• Six different step resolutions: full-step, half-step, 1/4-step, 1/8-step & 1/16-step
• Adjustable current control lets you set the maximum current output with a potentiometer, which lets you use voltages above your stepper motors rated voltage to achieve higher step rates
• Intelligent chopping control that automatically selects the correct current decay mode (fast decay or slow decay)
• Pack of 1

• Material: PLA(Polylactic Acid) - Color: White - Weight: 1 KG (approximately 2.20 lbs) Spool
• Size: 1.75mm,Tolerance Level : ? 0.03mm - Spool Diameter: 7.87\" - Spool Width: 2.83\" - Spool Hub Hole Diameter: 2.20\"
• Recommended Printing Temp/Nozzle Temperature: 195-220 degreeC(383-428 degreeF) - Base Plate Temperature: 20-50 degreeC(68-122 degreeF), PLA filament can be processed at 185 degrees
• Performance Advantages: The strength and toughness of our PLA filament is higher than the general PLA filament on the market. The air is filled with slightly sweet smell likes candy when printing
• Non Toxic: All of products have passed the RoHS Directive, made by 100% polylactic acid.

• 3D printer hotend, Metal J-Head v6 compatible hotend for 1.75mm filament, w/ 0.4mm nozzle
• Heatsink Shroud and high speed, 12V 0.13A cooling fan / NTC 3950 100K thermistors, w/ leads and dupont connector
• 12V 40W heater / 3ft long, 4mm OD 2mm ID PTFE bowden tube and quick connect fittings
• Hot End can be used for: ABS, PLA, PETG, and most any other conventional print materials
• This hot end can reach over 230C, for high temperature performance.

• Belt type: gt2
• Width: 6 mm, length: 2 meter
• Pitch: 2 mm
• Colour: black
• Material: rubber

• Material: ptfe (poly tetra fluoro ethylene)
• Color: milky white/transparent
• Outside diameter: 4mm, inside diameter: 2mm
• Length: 1 meter; ptfe/Teflon tube

• Material: POM (Industrial Plastic)
• Diameter: 8mm; Mounting hole spacing: 20mm
• Type: T8 Trapezoidal Anti-Backlash Nut With Steel Screw & Nut
• Pitch : 2mm Lead : 8mm (Four-Head,Nut Turn One Circle,Screw Forward 8mm)
• Customer Help : 9670411510

• Shiny Silk PLA Smooth and shiny finish like real silk, no extra polishing needed, printing at a high detail results in a beautiful finish. High quality silk PLA filament brings arts & crafts and 3D projects smooth shiny silk-like surface which definitely gives an eye-popping result!
• Dimensional Accuracy & Consistency advanced CCD diameter measuring and self-adaptive control system in the manufacturing guarantee these PLA Silk filaments of 1.75 mm diameter, dimensional accuracy + / - 0.02 mm; 1 kg spool (2.2lbs)
• Clog-Free, Bubble-Free & Easy-to-use - Designed and Manufactured with Clog-Free patent to guarantee a smoother and more stable printing experience with PLA Plus. Complete drying for 24 hours before packaging and vacuum sealed with desiccants in nylon re-sealable bag, 3D promises no tangles, no bubbles and no clogs due to its rigid manufacturing quality control. Give us a chance to prove were your future go-to filament with its smooth extrusion and stable printing performance.
• Cost-effective and Wide Compatibility - Protomont 3D can produce thousands of tons of filament per month, which can produce various filaments on a large scale and high quality so that filaments are cost-effective and highly reliable. WIDE APPLICATION - perfect and easy for school, home, showroom, office, and electronics fields, etc, Universal compatibility with diverse FDM 3D printers in the market.
• Contact us salesprotomont@gmail.com

• Type: Flexible Shaft Coupling (In 3d printer connect Stepper motor shaft to lead screw)
• Material : Aluminium
• Size : 5mm x 8mm (d1 x d2)
• Outside Diameter : 19mm (D)
• Length : 25mm (L)

• V SLOT ALUMINIUM EXTRUSIONS 20X40 1000MM OPENBUILDS, CNC ROUTER
• V-SLOT ALUMINUM EXTRUSIONS IS A HIGH QUALITY LINEAR RAIL PROFILE WITH AN EXTREMELY SMOOTH V GROOVE ON ALL 4 SIDES.
• ITS PRECISE, EASY TO WORK WITH AND ALLOWS YOU UNLIMITED DESIGN CONTROL THROUGH ITS MODULAR NATURE
• YOU WILL FIND THAT V-SLOT ALUMINIUM EXTRUSIONS IS THE PERFECT SOLUTION FOR MOST PROJECTS, BELOW IS THE LIST OF A FEW IDEAS TO GET YOU STARTED
• 3D PRINTERS CNC ENGRAVERS HOT WIRE MACHINES LASER CUTTERS CAMERA SLIDERS PLASMA CUTTERS ROBOTICS

• Belt type: gt2
• Width: 10 mm, length: 2 meter
• Pitch: 2 mm

Popular Categories on BuyBestBrands.in