Kisan Store - Automatic Irrigation Equipment - Irrigation Drippers

• Pressure Compensating Drip Irrigation Emitters

• [1]: APPLY TO - The irrigation drip emitters are widely used in gardens, lawns, outdoor yards, flower pots, container plantings, and hanging baskets.
• [2]: SPECIFICATION - Barb Outer Diameter: 5.5mm / 0.22''; Nozzle Inner Diameter: 2.5mm / 0.1''; Flow Rate: 1 Gallon per Hour / 4 Liter per Hour; Total Size: 36mm x 27 mm / 1.4'' x 1.1'' (L*H)
• [3]: DESIGN - Our pressure compensating dripper is specially designed to maintain water constant flow and pressure, which has the function of self-flushing and can effectively prevent clogging.
• [4]: ADVANTAGE - Made of durable plastic, wear-resistant, lightweight, compact and sturdy. It has high impact strength and can be used for a long time.
• [5]: QUANTITY INCLUDED - 50pcs x Irrigation Dripper

• Quick Connect Design: New MIXC drip irrigation emitter can be connected directly to 1/4\" irrigation tubing, no more heating to soften the tubing. Just 1 step, plug and play(1 second installation).
• Adjustable Water Flow: Spray diameter from 0 to 10 feet. Flexible adjustable water flow while using, no matter you want it larger, smaller, or turn off. Our drip irrigation spray emitters can achieve what you need.
• Application: Max water flow rate of our drip emitters is 25 gallons-per-hour, suitable for lawn, garden, flower beds, vegetable gardens, herbs gardens, etc. Especially for large garden.
• Applicable Irrigation Tubes: These drip emitters are suitable for ALL 1/4\" irrigation tubing. No need to heat irrigation tubing, easily connects directly to drip irrigation emitters.
• Easy to Clean: These drip emitters are detachable and very easy to clean. Don't worry about clogging.

• Water up to 30 individual container plants. Total 127pcs.Include:Pressure Regulator 3/4\" FHTx3/4\" MHT 25psi (1)+ Hose Adapter 3/4\"FHT to 1/4\" Barb (1) +1/4\" Barb Coupling (10) +1/4\" Barb Tee (30) +1/4\" Barb Elbow (10) +1/4\" Tubing 100ft (1) +Goof Plug Dual End (10) +Holder Stake (30) +Pressure Compensating Emitter 0.5GPH (30)+1/4\" Connector Clamp (2) +3/4\" Rubber Ring (2)
• The drip irrigation tubing in this kit can be cut with ordinary household scissors, box cutter or tin snips.This kit utilizes 1/4\" (.170\" ID x .250\" OD) tubing as the mainline.This kit does not require a hole punch.
• The number of plants to 30 container is an estimate based on each container receiving one drip emitter. Larger plants should get two drip emitters
• Extra rubber ring 3/4\" for thread fitting to water leak.Extra 1/4\" clamp for facuet adapter to avoid fall off by water pressure (clamp need plier to grip on)
• Reasonable quantity and suitable pipe type and pressure regulation to avoid water leaking or no water at the end
• Tips: ?1/4 tubing need hot water to easier insert . ?For watering 30 plants maximum 1.5feet height and 1.5feet spacing pot without extra tubing added.

• Irrigation angle: Multiple streams provide 360 degreecoverage
• Offering finger-tip flow and distance control with a shut-off option
• Suitable for pots, tubs, ground cover, landscaped gardens and nurseries
• 8 holes at the top, adjustable water flow
• Perfect for 4/7mm (Inner/Outer diameter) tube

• Comprehensive Package: The package includes 50 pressure compensating irrigation drippers with a fixed output of 1/2 gallon per hour. Their compact structure and small volume facilitate flexible layout, promoting fast and healthy plant growth.
• Steady and Uniform Water Flow: Drip irrigation emitters are designed to deliver a consistent and uniform amount of water flow. They maintain a constant 1/2 GPH water flow rate, even with varying inlet water pressures and positions along the tubing length.
• Anti-Clogging Design: These drip emitters feature a self-flushing design, ensuring continuous self-cleaning action while irrigating. The removable cap allows for easy cleaning and maintenance, eliminating concerns about clogging.
• Easy Installation: Irrigation drippers can be easily attached to the end of 1/4'' drip tubing (requires punching a hole first). A helpful tip is to place the end of the tubing in hot water during installation to make it more pliable, allowing the drippers to slide in easily.
• Excellent Quality and Benefits: Made of highly durable plastic, these drip emitters withstand harsh outdoor environments while maintaining their quality. They are suitable for average-sized drip systems, watering systems, and sprinkler systems. The slow and steady watering rate ensures efficient water absorption in the plant's root zones, promoting healthier plants. This system saves water, reduces plant stress, leads to earlier production

• SIZE: For use with any 1/4\" Inch tubing size - 4 to 7 mm (Can also be punched into 1/2 drip tubing).
• PREVENT LEAKS & BLOWOUTS: These emitters are designed with an operating pressure: up to 25 PSI. If your system is over that number blowouts and poor performance will occur.
• DESIGN: Barb design ensures tubing will not slip out or blow off at high pressure and temperature NOTE: THE MAXIMUM RECOMMENDED AMOUNT OF FITTINGS PER ZONE AT 25PSI IS QTY.22 IF YOU EXCEED THIS AMOUNT YOU MAY HAVE INSUFFICIENT WATER PRESSURE.
• ECO FRIENDLY: Provide water directly where you need it without any overspray!
• EASY TO INSTALL: Install emitters directly into the 1/2 main line or branch off with 1/4 inch tubing and connect fittings to the ends! INCLUDES CONNECTORS!

• Garden irrigation dripper watering nozzle with high quality, durable in use.
• The irrigation nozzle is made of plastic material, durable and resistant to aging.
• Beautiful appearance and easy installation, practical accessories for plant watering.
• The sprayed water is atomized, will not damage vegetables, flowers, trees and others.
• With this drip sprinkler, you can easily water your plants and flowers, reliable to use.

• Products using the new high-quality plastic, stable quality, long service life
• The water flow is 4L/H of the dripper. This is a common size used on water filter systems, water coolers, and so on
• This connects 4/7mm hose is widely used in horticulture irrigation, balcony gardening, garden irrigation and other places
• Pressure compensating (1-4 bar) regardless of the pressure for consistent water flow
• Fit for long row plants and drip watering individual plants

• The housing is made from premium pom material, waterproof and available for long service life.
• Achieve different watering times per day, the shortest water spray time is 1 minute, the maximum time is 9 hours and 59 minutes.
• Irrigation frequency: irrigation at least once a day, up to 16 times and for up to 3 days. And for primary irrigation frequency: irrigate at least 1 irrigation per day, maximum 16 irrigation per day, maximum 30 days.
• Suitable for balcony, courtyard, plant, wall, green micro sprinkler irrigation, drip irrigation
• The charging method is environmentally friendly and energy-saving, just need 2 x 1.5V rechargeable batteries(not included) + ordinary light.

• [STURDINESS] Improved new material different from normal terracotta, strong but still release water enough for soil.
• [EASY TO USE] Just recycle any long neck bottles, such as wine bottle, glass beer bottle, soft drink bottle etc., not need any more fittings required. Place this device into soil then stick with bottle full of water, that's all.
• [HEALTHY ROOTS] With these watering spikes, water slowly sipped to make plants grow greener, healthier, especially for areas there's air almost no humidity.
• [PLANTS SISTER] Free your hands to water everyday and excellent work while you are away or on vacation for a few days, it helps to take care of your plants without casualties.
• [OUTDOOR & INDOOR] Applicable to both outdoor and indoor plants, if only your planter can hold it and will not lean down after placing a bottle full of water.

• High Quality: Drip Emitters made of high-quality plastic, stable quality, long service life
• Easy to Clean: Removable flag top for fast and easy cleaning. High flow 1 GPH \"flag\" style dripper/emitter with shutoff
• Fit for Tube Size: Flag Drip Emitter suitable for 4mm / 7mm tube; Working Pressure: 0.5KG to 3.5KG
• 4mm barb inlet to prevent debris into the dripper system startup. When the crop water demand increases with crop growth stage, you can increase the number of emitters, a uniform water flow, ensure accurate distribution of water
• Wide Application: Irrigation spray drip emitters perfect for flowers, vegetables, lawn, garden greening, lawn greening, agricultural planting, etc

• Durable PP Material - DGQ Pressure Compensating Drippers are made of high quality PP material, not easy to break and durable.
• 2 GPH Pressure-Compensating Emitter - 2 Gallon per hour pressure compensating drip irrigation emitters ensure every plant on your drip irrigation system receives the same amount of water and the slow watering rate allows soil to absorb water more completely in the root zones of plants.
• Self-Flushing System - Continuous self-flushing system, even while irrigating, provides these 2 gph pressure compensating emitters with superior resistance to clogging.
• Constant Flow Rate - DGQ drip irrigation dripper maintains a constant flow rate even on hillsides or long circuits.These 2 GPH drippers connectable to 4mm inner diameter tube or 7 mm outer diameter tube.
• Great Idea for Irrigation System - Value pack in 20 pcs, ideal for flowerbeds, lawns, landscaping, vegetable, flower gardens, agriculture, pots, patio, planter boxes, vineyards, greenhouse, nursery, hydroponic, farm and other commercial irrigation systems or residential home gardens and landscape applications.

• Precise water flow to every plant every time
• Self-cleaning operation; at the beginning and end of every irrigation cycle
• Excellent for sloping terrains
• Compact multi-optional button dripper
• Highly reliable

Popular Categories on BuyBestBrands.in