Sewing Machines & Accessories By ckpsms

• 1 PCS THREE CORNER GUIDE GAUGE FOR INDUSTRIAL SEWING MACHINES.

• 1PCS Silicon Iron Rest.
• Size:length 224mm X width149mm.Please pay attention to the size of the product !
• Description: Outside is coated with Silicon and inside is hard steel ( Does Not Bend).
• Keep your iron from slipping off the pressing station with this sturdy silicone Rubber-Coated Metal Rest. Features two raised areas on the rest for added iron safety. Place on flat surface, withstands the high heat of irons.

• 1PCS REVERSE FEED CONTROL LEVER for JUKI DDL-5550,DDL-5600L-6,DLN-5410-6

• 1PCS Feed Drive Gear.Please note the applicable location of the product????
• Compatible with SINGER sewing machine models:1030, 1036, 1425, 1482, 1485, 1486, 1488, 1490, 1492, 2001, 2005, 2010, 2102, 2105, 2106, 2108, 2110, 2112, 2114, 2118, 2210, 2302, 2303, 2304, 2315, 2330, 2404, 2430, 2502, 2503, 2504, 2515, 2530, 2623, 2638, 2662
• Compatible with SINGER sewing machine models:2712, 2718, 2722, 2724, 2730, 2732, 2950, 290, 4610, 4624, 500, 501, 502, 503, 507, 509, 510, 513, 514, 518, 522, 527, 530, 533, 534, 538, 543, 553B, 554B, 560, 6100, 6102, 6104, 6105, 6106, 6110, 6112, 6114, 6115, 6116
• Compatible with SINGER sewing machine models:6120, 6124, 6125, 6126, 6130, 6136, 6146, 6152, 6156, 6174, 6184, 6233, 6234, 6235, 6268, 6544, 7004, 7037, 7100, 7101, 7102, 7104, 7105, 7106, 7108, 7110, 7136, 714, 7146, 7171, 7174, 717E, 717 School, 7184, 7186, 719
• Compatible with SINGER sewing machine models:720, 724, 734, 737, 740, 750, 755, 756, 758, 760, 763, 764, 770, 774, 775, 776, 778, 800, 8019, 8100, 813, 814, 830, 834, 900-3, 920-3, 925, 925-3, 935U, 941, 9410, 9417, 9602, 9605, 9610, 9614, Athena 2000 (2000A)

• 1PCS Timing Belt / Motor Belt , This belt Width 6mm ,91 teeth ,Timing 180XL Cog Type
• Compatible with/Replacement for SINGER brand sewing machine models: 240, 241, 242, 247, 247AP, 248, 249, 250, 251, 252, 257, 258, 259, 263, 288, 350, 353, 360, 362, 366, 367, 547, 563, 588, 1247, 1263, 1280, 1288, 2302, 2303, 2304, 2315, 2330, 2404, 2440, 3100, 3101, 3102, 3103, 3105, 3130, 3140, 4325, 6012, 6174, 6305, 6310, 6314, 6318, 7100, 7101, 7184, 9502, 9505, 9602, 9605, 9610, 9614, 964, 966, 968, 972, 974, CE-350 Futura III

• 2PCS bobbin cover/slide plate,for many side loading machines
• Plate measures 2 7/8\"\" X 2 1/2\".
• Fit for Singer models 15-30, 15-86, 15-87, 15-88, 15-90, 15-91, 15-96, 15-125, 115-1, 193, 194, 237, 238, 239, 293B, Kenmore 148.12011, 158.13031, 158.840, Nelco N250, New Home 446, 534, 552, Riccar 601, 608, SZ702, White 1044, most Japanese side loading machines,

• IMPORTANT: In case you did not NOT receive CKPSMS brand plastic box, please issue amazon A TO Z claim to get FULL refund.
• 60PCS ORGAN NEEDLES. 9/65 11/75 12/80 14/90 16/100 18/110 Each model 10 PCS.
• Compatible with/Replacement for Singer brand, Kenmore brand, Brother brand, Bernina brand, Pfaff brand, Janome(New Home) brand, Elna brand, Viking brand, White brand, Babylock brand, Simplicity brand, Dressmaker brand, Necchi brand, Nelco brand, Riccar brand and most other home sewing machines

• 1PCS NEEDLE THROAT PLATE
• Compatible with/Replacement for Bernette brand Sewing Machine Models:12, Sew&Go1, Sew&Go2, Sew&Go5
• Compatible with/Replacement for Euro Pro brand Sewing Machine Models:8260, 8260L
• Compatible with/Replacement for EverSewn brand Sewing Machine Models:Sparrow 15
• Compatible with/Replacement for Singer brand Sewing Machine Models:1105, 1106, 1107, 1109, 1116, 1120, 1130, 1304, 1306, 1405, 1408 Prelude, 1408 Promise, 1409 Promise, 1507, 1525, 155, 1725, 1748, 2250, 2259 Tradition, 2263 Simple, 2273 Esteem II, 2277 Tradition, 2282, 3221 Simple, 3223, 3229, 3232, 8275, 8280, 8770 Curvy

• 2PCS Needle Bar Threading Wire.
• Compatible with/Replacement for SINGER brand 29-4, 29K, 29U CLASS Sewing Machines.
• There is a perfect split on the front of the Threading Wire, Can easier to thread. The total length is about 31.5CM.

• 10PCS sewing machine motor belt. Its material is nitrile rubber. Its perimeter ranges from 13 inch (330mm) to 15 inch (380mm) because it is stretchable and its diameter is 3/16 inch (5mm)
• Please make sure that the perimeter of your required belt ranges from 13 inch (330mm) to 15 inch (380mm) BEFORE you buy to avoid unfitting issue and it is important to measure the perimeter of your original belt BEFORE you buy this belt.
• Compatible with/Replacement for many SINGER brand KENMORE brand WHITE brand domestic / household sewing machines
• This sewing machine motor belt is a good choice as a sewing machine belt. Because it is easy to fit and there is no slippage and less drag on the sewing machine motor.

• 5PCS Wrench Titanium plating for Industrial single needle sewing machines.This bobbin case wrench is with titanium nitride coating. The titanium nitride coating on the surface is extremely hard, so it can protect the wrench from damage and wear and prevent heat as well.
• Fit For Brother : B705, B707, B714, B715, B735, B737, B738, B745, B755, B756, B758, B767, B781, B790, B791, B792, B793, B795, DD7000, PQ1300, PQ1500
• Fit For Consew : 30, 98, 99, 100, 102, 103, 105, 210, 217, 218, 219, 220, 230, 231R, 290, 310, 2230, 7360R-1
• Fit For Juki : DDL-105, DDL-115, DDL-436, DDL-500, DDL-552, DDL-553, DDL-555, DDL-5550, DDL-8500, DDL-8700, DDL-8900, DDL-9000, DLD-432, DLM-522, DLM-5400, DLN-412, DLN-415, DLN-5410
• Fit For Singer : 1300, 1300-2, 1400W, 188K, 188K1, 191, 195, 195K, 196K5, 241, 241-11, 241-12, 241-13, 245, 251, 281, 281-1, 281-3, 281-21, 291U, 32-45, 331K, 366K, 400W, 400W21, 451K, 491, 591D200A, 600W, 660A, 660W, 701-710, 761-765, 94-40, 95, 95-10, 96, 96CL, 96-46, 95K40 through 95K100, 96K40 through 96K100

• 1SET WALKING FOOT WITH SPRING LOADED SMOOTH BOTTOM RIGHT EDGE GUIDE .
• fit for BROTHER: B837
• fit for CONSEW: 206RB 225 226R 244 255 277
• fit for JUKI: DNU-241 DNU-1541 DSC-244 DSC-245 DSC-246 LS-341 LU-562 LU-563 LU-1114 LU-1508 LU-1510 LU-1560
• fit for SINGER: 111G 111W 153K101 153K103 153K104 153W101 153W103 153W104 168W 211A 211G 211U 211W 411U 4411A

• 2PCS Standard Foot compatible with Industrial Lockstitch Sewing Machines. Used by almost all industrial single needle machines (except German made models)
• Compatible with Brother: B-series: 705,715,735,737,757,760,767,781,791,792,795
• Compatible with Consew: 210,218,219,220,23R,290R,292,310,2230R,7360R-1,7360RH
• Compatible with Juki: DDL all classes (except DDL-201) DLD-432,DLM-522,DLM-5200,DLM-5400,DLN5400,DLN412,DLN415,DLN5410,DLU450
• Compatible with Singer: 95,96,120u,121c,121D,220u12,241,251,281,366k,400w,402w,451k,600w,660a,770D,771D,2491D

• SET of Upper and Lower Knives / Blades
• FIT for BABYLOCK SERGER - BL202, BL302, BL400, BL430, BL432, BL450A, BL4350D, BL5030, BL5040, BL5040L
• FIT for Elna Serger T-3 ,T-33 ,T-34 ,T-34D.
• FIT for PFAFF SERGER - 756
• FIT for Singer Serger 14U style: 14u12a, 14u13, 14u32 ,14u34a, 14u34b, 14u44 ,14u46 ,14u52a, 14u53 ,14u64a, 14u65, 14u85 ,14u234 ,14u244 14u285 ,14u28 ,14u344, 14u354, 14u444 ,14u454, 14u544 ,14u554, 14u555, 14u557, PRO4D, Singer Merritt and many others.

• 1PCS UPPER VERTICAL GEAR.
• Please pay attention to the sizes posted in the photo from this listing, especially the gears height, the height is about 20.5mm
• The installation position of the gear is marked with the red arrow in the posted photo from this listing.
• Compatible with/Replacement for SINGER brand Sewing Machine Models: 247, 413, 416, 416K, 418, 418K Stylist, 457, 457K, 466, 476 Stylist, 476K Stylist, 477, 478, 518

• 1SET WALKING FOOT WITH SPRING LOADED SMOOTH BOTTOM LEFT edge guide .
• Compatible with BROTHER : B837
• Compatible with CONSEW : 206RB, 225, 226R, 244, 255, 277
• Compatible with JUKI : DNU-241 DNU-1541 DSC-244 DSC-245 DSC-246 LS-341 LU-562 LU-563 LU-1114 LU-1508 LU-1510 LU-1560
• Compatible with SINGER : 111G 111W 153K101 153K103 153K104 153W101 153W103 153W104 168W 211A 211G 211U 211W 411U 4411A

Popular categories on Home & Kitchen