Cameras & Photography Store - Lenses

• Kit Includes: Generic Metal 11pcs Step Up Ring 26-30MM, 30-37MM, 37-43MM, 43-52MM, 52-55MM, 55-58MM, 58-62MM, 62-67MM, 67-72MM, 72-77MM, 77-82MM
• Manufactured by a professional team for photography enthusiasts to provide a very exciting experience
• The first number is always the lens thread size, the second number is the filter size of the accessory. If the first number is smaller, it s a step-up

• Action includes Rear Lens Cover + Camera Body Cap Set x 5pcs
• The lens rear cap will protect the lens rear element.
• With Fotasy Premier Lens Cleaning Cloth

• Designed for the Tough TG-1 iHs, TG-2 iHS and TG-3 iHS camera digital camera.
• The adapter enables the easy attachment of the FCON-T01 fisheye converter lens or the TCON-T01 tele converter lens for expanding your photographic horizons.
• Its mount accommodates any 40.5mm filter to further allow your creativity to flow.
• Front Mount Diameter 40.5 mm, Length 8.8 mm (0.34 inches)
• 100% replaces OLYMPUS CLA-T01 lens adapter

• Block stray light from entering the lens
• Extra protection from accidental impack
• Reversible for easy storage
• Fits well with the lens
• Lens Hood only

• Metal construction
• Black finish to match the 12mm f2.0 black lens
• Square design

• Replacement for Canon EW-73C Lens Hood
• Designed to prevent unwanted stray light from entering the lens.
• Ensures no problems with vignetting or motor functions.
• Fits Canon EF-S 10-18mm f/4.5-5.6 IS STM Lens
• With Fotasy Lens Cleaning Cloth

• Includes 1 replacement VGA camera with its connector
• Also includes 1 retaining piece and 1 Khaki housing
• Parrot recommends the camera & body for the Jumping Sumo

• Omnivision 5647 sensor in a fixed focus module.
• The module attaches to Raspberry Pi, by way of a 15 Pin Ribbon Cable, to the dedicated 15-pin MIPI Camera Serial Interface (CSI).
• The CSI bus is capable of extremely high data rates, and it exclusively carries pixel data to the BCM2835 processor.
• The sensor itself has a native resolution of 5 megapixel, and has a fixed focus lens onboard.
• The camera supports 1080 p @ 30 fps, 720 p @ 60 fps and 640 x480 p 60/90 video recording also it is supported in the latest version of Raspbian, the Raspberry Pi's preferred operating system.

• Package includes: K&F Concept 67mm ND Filter (ND2 ND4 ND8) + Graduated Color Lens Filter ( Blue Orange Gray )+ Microfiber Lens Cleaning Cloth + Flower Petal Lens Hood + Center Pinch Lens Cap + Filter Pouch
• NOTE: This filter is compatible with all 67mm lenses. Please verify your camera s lens thread size before ordering. Your camera s lens thread size will be marked somewhere on the lens barrel or printed underneath your lens cap.
• The filters are double-threaded, so you can stack your lens cap and other accessories as needed. Great for portraiture and outdoor scenes in strong sunlight.

• Compatible With :-JJC LH-N106 Professional Hard Lens Hood for NIKON 1 NIKKOR 10-100mm f/4.0-5.6 lens Replaces Nikon HB-N106
• Non-glare matte finish on the interior further preventing lens flare
• Extra protection from accidental impact
• Lens hoods are primarily designed to avoid unwanted stray light from entering the lens

• This Lens support system is perfect for long lenses and is compatible with any industry-standard 15mm rod system, help to create a more stable, vibration-free platform for shooting.
• The Y shaped long lens support screws onto the 15mm rod clamp to the long telephone lens while shooting.
• There are two rubber washers to protect the finish off of your lens from wearing. Gloove/Slot design, allow to use Velcro to fasten your big lens.
• Wildely compatible with different lens. The diameter range of lens support: 50mm to 140mm ; Adjustable in height.
• NOTE: Dual Rod Clamps Please Search \"SmallRig 1761\" OR SmallRig 1783 OR SmallRig 1784.

• Product Type: Lens Hoods
• This product is imported from USA - It is a 100% genuine product

Popular Categories on BuyBestBrands.in