Additive Manufacturing Products By 3DINNOVATIONS

• Model Number : PC4-M6
• Thread Size : M6
• Material : brass & plastic
• Quantity: 2 pc
• Use: Bowden extruder in Creality and other 3D Printer Extruder

• Model: SHF8 ;Bore:8mm
• Material: Aluminum; Surface Finish: Anodised; Color: Silver
• Shaft Support suitable for 8mm Diameter Shaft used in CNC, 3D Printing applications
• Product Size:42 x 24 x 10mm; Inside Diameter:8mm/0.31\"(Applicable to the optical axis diameter 8mm)
• Clamping bolt:M4; Recommended Mounting bolt:M5(not included here)

• This item is a 2020 aluminum profile flat seal manufactured with premium material for durable and long-lasting use. Its easy to use and install with long service life.
• The precise design will ensure its practicability in the work of highly performance
• 6mm M6 Aluminum Profile Slot Cover 2020 Aluminum Fittings Seal Accessories for 3D Printer
• 3D Printer DIY Parts 303 Aluminum Profile Slot Cover

• Type: Cable for 42 stepper motor
• Terminal: Black 2.54 mm Dupont Connector of 4pin & White PH2.0 of 6pin (XH2.54 4P-PH2.0 6P.)
• Length:1 Meter
• 3D Printer Stepper Motor Parts to connect Ramp 1.4 or Other devices.
• Quantity: 2 pcs.

• Flexibility of this coupler removes stress between motor and driving component.
• Compatible with NEMA 17 stepper motors (for 5mm to 8mm shaft diameter).
• Useful in RepRap 3D Printers and small CNC machines.
• Quantity: 2pcs
• Size : 5mm x 8mm (d1 x d2); Outside Diameter : 19mm (D); Length : 25mm (L)

• 3 Pcs: mechanical end switch
• 3 Pcs: cable 3-pin 70 cm
• Red wire connects to vcc (ramps of +)

• Type: Flexible Shaft Coupling (In 3d printer connect Stepper motor shaft to lead screw)
• Material : Aluminium
• Size : 6.35mm x 8mm (d1 x d2)
• Outside Diameter : 19mm (D)
• Length : 25mm (L)

• 0.2, 0.3, 0.4, 0.5, & 0.8 mm Extruder nozzle set
• Size : 13 x 7
• Thread : M6
• Material : Brass
• Applied materials : PLA or ABS 1.75 mm.

• (1) Dual power supply. Operate at 12V or 24V. You can use thinner wires when operating at 24V.
• (2) A central mounting hole on the front side to allow for three point mounting. This is much easier for bed leveling in comparison to 4 point mounting. First level the side with two holes and fix in place, then level the side with one hole.
• (3) Large solder pads for multiple wires (ribbon cable) or a SMD pinhead connector can be mounted.
• (4) With 15V on the 12V terminals will maintain approx. 115 degree Celsius without regulation.
• (5) Running 24V on the 12V terminals will heat up the heatbed to 100 degree in only 2 minutes

• Optical Endstop
• Size:32mm x10mm /1.26\"x0.39\"(inch) (approx)
• Optical limiting optical switch 3D printer switch transmission
• And supporting the use of RAMPS 1.4 plate
• Normally, 3 optical switches are needed for the system; durable with more than 100,000 times cycling life.

• Package Included: 12pcs Rod Ends +12 pcs Pivot Balls
• Pivot Ball Inside dia: 3mm
• Rod End connection Dia: M3
• Rod End Length: 20 mm
• Compatibility Traxxas 5347

• Type: LM6LUU Linear ball bearing
• For: 6mm Linear guide rod round shaft cnc, Size: 6mmx12 mmx35mm
• Material: -Housing :Gcr15 steel, harden
• -Ball: Chromium steel Gcr15, heat treatment, hard chrome plated
• -Cage: Engineering plastics

• Extrusion hole diameter : 0.4 mm.
• Quantity : 1
• Thread : M6
• Material : Brass
• Applied materials : PLA or ABS 1.75 mm.

• Heated bed power module, based on powerful MOSFET HA210NO6
• Size: 60*50mm, Mounting holes: 3.2mm diameter, for M3 screws. Distance betweeen holes: 54*43mm
• Very powerful MOSFET to withstand higher current than normal RAMPS or other 3D Printer controller can handle
• Voltage: 12V-24V
• Under the premise of normal cooling, it work stable under I(Max)=25A, the current must not exceed 25A while the process working

• Product name: Nema 17 Stepper Damper
• Type: Peek Isolator; Material: Cork sheet
• Size: 42mmx42mm; Thickness: 3mm
• Apply: 3D Printer /CNC machine; Suitable for: Nema 17 motor
• Qty: 4 pcs

• Material Z-Rod Bearing Holder is made of aluminum alloy
• Widely Used widely used for Creality CR-10, Ender 3
• Dimensions Length: 45mm. Width: 34mm. Height: 17mm
• Function Diameter 8mm Z-Axis Leadscrew Top Mount for 3D Printer
• Package Include 1pcs Z-Rod Bearing Holder, 2pcs M4 T Nuts, 2pcs M4x14mm screws

Popular Categories on BuyBestBrands.in