Automotive - Car Accessories - Spark plug

• Replacement racing ignition cables for motorcycles
• 5K ohm resister cap included
• High output stranded copper wire for maximum spark transfer
• 50cm length
• Removable 90 degree spark plug cap
• Warranty not applicable for this product

• This brand new High Performance Spark Plugs with High Performance Three Electrode Head.
• Special Material of electrode, long life and Strong Spark, Gives Spark Three Paths To Follow, Specifically Designed To Boost Performance Of the Engine.
• Replaces: D8TC, NGK D8EA,DR8EA and so on.
• Fitment:CG Vertical Engine Series: 125cc 150cc 200cc 250cc dirtbikes ATVs motorcycles.

• Spark Indicator -Tests For Spark Plugs, For Spark Plug Wires and Coils Without Puncturing the Wire.
• With the engine running, place the grooved end of the tool over the plug wire.
• High intensity bulb and viewing window for greater flash concentrating,The bulb will flash to indicate spark.

• Compatible Vehicles : TVS- Apache RTR 160/180,RTR 180 ABS
• Usage: 1. First, install NIKAVI spark plug by hand until gasket reached the cylinder head.2. In case difficult to install spark plug by hand then use support tool such as rubber pipe to help installation of plugs. 3. Do not use plug wrench to insert spark plugs from beginning to avoid thread damage . 4. Use torque wrench to tighten spark plug with specific tightening torque (25~30Nm) to avoid metal shell breakage, if torque wrench is not available then tightening by angle (180-240).
• Safety & Care Instructions: 1. NIKAVI Spark Gap should not disturbed. 2. Proper torque should be applied. 3. Should use for the applications it is recommended for.
• Disclaimer for usage: Please consult a qualified vehicle mechanic regarding compatibility, usage and installation of this plug in your vehicle.

• Compatible for HERO-Maestro (Scooter),Passion Pro X.,HONDA-Dream CD 110,Shine,CB Shine 125,CB shine SP 125,CBF Stunner,CB Twister,Activa (Model from Mar'09 up to Jan'13),Aviator (Model from Mar'2009),Dream Yuga,Dio (Model after April'12 Upto Dec'13),Dream Neo,Livo
• Compatible for 155cc (standard spark plug).,TVS-Star City 110cc.,YAMAHA-Saluto 125cc.,ROYAL ENFIELD-UCE Twin Spark Plug 350cc (Thunderbird),UCE Twin Spark Plug 350cc (Classic),UCE Twin Spark Plug 350cc (Bullet)
• Usage: 1. First, install NIKAVI spark plug by hand until gasket reached the cylinder head.2. In case difficult to install spark plug by hand then use support tool such as rubber pipe to help installation of plugs. 3. Do not use plug wrench to insert spark plugs from beginning to avoid thread damage . 4. Use torque wrench to tighten spark plug with specific tightening torque (25~30Nm) to avoid metal shell breakage, if torque wrench is not available then tightening by angle (180-240).
• Safety & Care Instructions: 1. NIKAVI Spark Gap should not disturbed. 2. Proper torque should be applied. 3. Should use for the applications it is recommended for.
• Disclaimer for usage: Please consult a qualified vehicle mechanic regarding compatibility, usage and installation of this plug in your vehicle.
• Please check this picture before you buy and compare with your old model

• Pack Of 3
• Best Durability
• We Supply glow plugs which are used to heat the combustion chambers of various engines in cold conditions to help ignition at cold start. Mounted on suction manifold, this product assists in cold starting of the engine
• Material: Stainless Steel

• Vehicle Compatibility: TVS Apache (All Models)
• Very convenient and easy to use
• Long life and quality product from NGK
• Reliable performance
• Attractive pricing

• This is heavy duty spark plug used for 2 stroke petrol engine
• Its quality is marvellous means it can run long time
• It should be keep in spare for brush cutter 2 stroke as it can be any time

• Compatible Vehicles : HERO-Achiever 150,Xtreme,CBZ Xtreme,Xtreme sport,Hunk,Impulse,Xtreme 200R (model from Oct'18),Xtreme (XT200FI),Enduro (XT200) (model from Oct'18),Xpulse 200cc (May'19).,HONDA - Unicorn,Unicorn Dazzler,CB Trigger,CB Unicorn 150,CB Unicorn (160 cc),CB Hornet 160R,X-Blade,SP 125 HET (BS-VI).,BAJAJ-Avenger,Discover 125 DTSi (Old model),Discover 135 DTSi,Platina 125cc
• Pulsar 150/180/200,XCD 125 DTSi,Pulsar220/220F (Left Side & Right Side),XCD135 DTSi,Eliminator,Pulsar 200NS (Left and Right hand side),Avenger Cruise/Street - 220 (Right side & Left Side),Dominar 400 (Right side & Left Side),Pulsar RS200 (Right side & Left Side),Pulsar AS 200 (Right side & Left Side).,TVS-Jupiter,Zest 110,Star City Plus,Pheonix,XL 100 (All variant),Wego 110.,YAMAHA-FZ-FI,SZ- RR 2.0,SZ-S,FZ-S,FZ 16 (150cc),FZ-FI V3.0 (BS-VI),FZ-S FI 150cc (model from Aug'18),FZS-FI V3.0 (BS-VI)
• Usage: 1. First, install NIKAVI spark plug by hand until gasket reached the cylinder head.2. In case difficult to install spark plug by hand then use support tool such as rubber pipe to help installation of plugs. 3. Do not use plug wrench to insert spark plugs from beginning to avoid thread damage . 4. Use torque wrench to tighten spark plug with specific tightening torque (25~30Nm) to avoid metal shell breakage, if torque wrench is not available then tightening by angle (180-240).
• Safety & Care Instructions: 1. NIKAVI Spark Gap should not disturbed. 2. Proper torque should be applied. 3. Should use for the applications it is recommended for.
• Disclaimer for usage: Please consult a qualified vehicle mechanic regarding compatibility, usage and installation of this plug in your vehicle.

• Copper Spark Plugs Caps - Red
• Resistor Covers Will Withstand Extreme Heat, Vibration, Prevent Flash over And Are Water Proof.
• Compatible for CBZ , HUNK , Glamour , Passion Pro , HF DLX , CD DLX , Passion Plus.
• Tip Material - Plastic

• Pack Of 4
• Best Durability
• Material: Stainless Steel
• We Supply glow plugs which are used to heat the combustion chambers of various engines in cold conditions to help ignition at cold start. Mounted on suction manifold, this product assists in cold starting of the engine

• Compatible for HERO-Maestro (Scooter),Passion Pro X.,HONDA-Dream CD 110,Shine,CB Shine 125,CB shine SP 125,CBF Stunner,CB Twister,Activa (Model from Mar'09 up to Jan'13),Aviator (Model from Mar'2009),Dream Yuga,Dio (Model after April'12 Upto Dec'13),Dream Neo,Livo
• Compatible for SUZUKI-Gixxer 155cc (standard spark plug).,TVS-Star City 110cc.,YAMAHA-Saluto 125cc.,ROYAL ENFIELD-UCE Twin Spark Plug 350cc (Thunderbird),UCE Twin Spark Plug 350cc (Classic),UCE Twin Spark Plug 350cc (Bullet)
• Usage: 1. First, install NIKAVI spark plug by hand until gasket reached the cylinder head.2. In case difficult to install spark plug by hand then use support tool such as rubber pipe to help installation of plugs. 3. Do not use plug wrench to insert spark plugs from beginning to avoid thread damage . 4. Use torque wrench to tighten spark plug with specific tightening torque (25~30Nm) to avoid metal shell breakage, if torque wrench is not available then tightening by angle (180-240).
• Safety & Care Instructions: 1. NIKAVI Spark Gap should not disturbed. 2. Proper torque should be applied. 3. Should use for the applications it is recommended for.
• Disclaimer for usage: Please consult a qualified vehicle mechanic regarding compatibility, usage and installation of this plug in your vehicle.
• Please check this picture before you buy and compare with your old model

• Compatible for HERO-Maestro (Scooter),Passion Pro X.,HONDA-Dream CD 110,Shine,CB Shine 125,CB shine SP 125,CBF Stunner,CB Twister,Activa (Model from Mar'09 up to Jan'13),Aviator (Model from Mar'2009),Dream Yuga,Dio (Model after April'12 Upto Dec'13),Dream Neo,Livo
• Compatible for SUZUKI-Gixxer 155cc (standard spark plug).,TVS-Star City 110cc.,YAMAHA-Saluto 125cc.,ROYAL ENFIELD-UCE Twin Spark Plug 350cc (Thunderbird),UCE Twin Spark Plug 350cc (Classic),UCE Twin Spark Plug 350cc (Bullet)
• Usage: 1. First, install NIKAVI spark plug by hand until gasket reached the cylinder head.2. In case difficult to install spark plug by hand then use support tool such as rubber pipe to help installation of plugs. 3. Do not use plug wrench to insert spark plugs from beginning to avoid thread damage . 4. Use torque wrench to tighten spark plug with specific tightening torque (25~30Nm) to avoid metal shell breakage, if torque wrench is not available then tightening by angle (180-240).
• Safety & Care Instructions: 1. NIKAVI Spark Gap should not disturbed. 2. Proper torque should be applied. 3. Should use for the applications it is recommended for.
• Disclaimer for usage: Please consult a qualified vehicle mechanic regarding compatibility, usage and installation of this plug in your vehicle.
• Please check this picture before you buy and compare with your old model

• BRAND NAME : Street27
• Package Includes : 1 Piece Spark Wear Ring
• Please check below description for product features and specifications.

• Compatible Vehicles: Honda Cars - City (Model from Oct 2008 upto Sept 2014 ), Jazz 1.2 MT
• Usage: 1. First, install spark plug by hand until gasket reached the cylinder head. 2. In case difficult to install spark plug by hand then use support tool such as rubber pipe to help installation of plugs. 3. Do not use plug wrench to insert spark plugs from beginning to avoid thread damage . 4. Use torque wrench to tighten spark plug with specific tightening torque (25~30Nm) to avoid metal shell breakage, if torque wrench is not available then tightening by angle (180-240).
• Safety & Care Instructions: 1. Spark Gap should not disturbed. 2. Proper torque should be applied. 3. Should use for the applications it is recommended for.
• Material: Metal; Color: White; Package Includes: 1 Spark Plug
• Disclaimer for usage: Please consult a qualified vehicle mechanic regarding compatibility, usage and installation of this plug in your vehicle.

Buy Automotives from the world of Automotives at buybestbrands.in

Buy Car Accessories online at buybestbrands.in

Take advantage of other benefits at buybestbrands.in

Popular Categories on BuyBestBrands.in