Batteries By SZRMCC

• This 12V 3A AC-DC power adapter is suitable for Power Atomos monitor, Lectrosonics venue VR IFB power cable, Pix-E Pix-E5 Pix-E5H Pix-E7 Monitor video devices or any other equipment with DC 2.1 thread needle connector.
• AC wide voltage input, Input: AC100-240V-50 / 60Hz.
• Output: DC 12V 3A 36W.
• Connector: DC self-locking right angle 5.5 mm x 2.1 mm. Cable length: about 80 inches/2 m (any other length you need, you can contact us).
• This is an American plug. If you want UK plug or EU plug, please leave a message after your purchase.

• The Hub Adapter Splitter cable expands the 12V/24V voltage of a 4-hole XLR output port to 4 Dtap port outputs, so you can easily power other camera accessories by extending 4 dtap; Tip: 4-hole XLR port output is 12v or 24v, depending on your battery, the 4 dtap output voltage value follows the input voltage value.
• With this PowerTap Receptacle, you can expand any Power Tap to accommodate up to four separate. powering multiple wireless receivers, on-board monitors as well as an Ultralight from an expand Battery with 4 Pin XLR port; Such as Anton-Bauer Battery.
• Plug A: 4 Pin XLR Male Connector; Plug B: 4 Port D-tap Female Connector.
• Max work current: 10 amp max total. Cable Length: 24inches/60cm(We can customize with other length, please contact us if you need)
• Each cable we produce has been rigorously tested and is compatible with machines from a variety of major brand suppliers,We are committed to all the products are qualified and high-quality.

• It is a cable which enables you to power for Canon C100 mk2 Camera from an Anton Bauer or IDX D-Tap battery.
• It has a voltage conversion circuit that converts the input 12V-24V to output 8.4V, So it can be used for a wide input voltage range.
• Plug A : D-Tap 2 Pin Male Connector, Plug B: Right Angle DC Connector.
• Cable Length : 24inches/60CM (We can customize with other length, please contact us if you need).
• Each cable we produce has been rigorously tested and is compatible with machines from a variety of major brand suppliers,We are committed to all the products are qualified and high-quality.

• Fit to Power for Sony a7 a7ii a7s a7r a7sii a7rii a6500 a6300 a6000 a5000 a5100 nex-5 nxx-7 nex Series Cameras by D-tap Anton Bauer V-Mount Gold Mount Battery or Battery plat directly, So you can shoot for a long time without replacing battery, perfect for long time shooting.
• Please Note: the D-tap 2 Pin input is about 14.8V-24V, NP-FW50 Dummy Battery output is about 8V/3A, please don't use more than 24V Power Source to power it.
• Plug A: D-tap 2 Pin Male Connector; Plug B: NP-FW50 Dummy Battery.
• The Min length is about 12inches (30cm). The Max length is about 31.5 inches (80cm).
• Each cable we produce has been rigorously tested and is compatible with machines from a variety of major brand suppliers,We are committed to all the products are qualified and high-quality.

• Fit to power your BMPCC4K 6K BMD Blackmagic Cinema Camera 4K 6K using an external Mobile Power Battery with a USB DC 5V 2A Outport.
• This cable contains a voltage Boost module, Which can regulate The voltage of DC 5V 2A to DC 12V 1.5A.
• Use this cable with select USB 5V 2A Mobile Power Battery for a longer-lasting power solution.
• Plug A: USB Male Connector; Plug B: Weipu SF610 2 Pin Female Connector.
• Cable Length: 39inches/100cm(We can customize with other length, please contact us if you need).

• This is an Extension Power Supply Cable, used to Connect Anton Bauer Battery to DSLR Rig Photography Camera Devices.
• DIY type, easy assembly with your customized cable.
• Plug A: D-Tap 2 Pin Male Connector; Plug B: D-Tap 2 Pin Male Connector.
• Cable Length : 39Inches/1m (We can customize with other length, please contact us if you need).
• Each cable we produce has been rigorously tested and is compatible with machines from a variety of major brand suppliers,We are committed to all the products are qualified and high-quality.

• This Coiled D-Tap to Weipu 2 Pin Cable from SZRMCC allows you to power your Blackmagic Pocket Cinema Camera 4K from any D-Tap power source, such as a Gold mount or V-mount battery.
• The cable features a standard D-Tap connector on one end and dedicated 2-pin power connector for the camera on the other.This coiled factor of the cable provides the flexibility to run the cable from one end of your rig to the other, while also letting you keep a neat connection if your power source is close to the camera.
• Plug A: Standard Male D-Tap Connector; Plug B: Weipu SF610 2 Pin Female Connector.
• The Min length is about 15inches (38cm). The Max length is about 31.5 inches (80cm).
• Each cable we produce has been rigorously tested and is compatible with machines from a variety of major brand suppliers,We are committed to all the products are qualified and high-quality.

Popular Categories on BuyBestBrands.in