Electronics Store - Cameras - Camera Accessories - Camera Cases And Bags

• 320 x 240 IR sensor offers more than 76K non-contact points of temperature measurement, eliminates guesswork by pinpointing hot spots and potential points of failure.
• Sensitive enough to detect temperature differences smaller than 0.06 C, for fast identification of faults and thermal gradients.
• Measurement accuracy of 2 c aids in attaining quality assurance and factory acceptance of printed circuit boards.
• Ergonomically designed for lab electronics measurement, the ETS320 is battery powered, Wireless, and hands free.
• 2-10 Thermal Camera Warranty from FLIR, 2 Years parts and labor coverage on the camera, 10 Years coverage on the detector the most vital part of the whole camera.

• Exterior Dimension (LWD Inches): 21.96 x 13.97 x 7.49. Interior Dimension(L X W X D): 20.50\" x 11.31\" x 6.75\" (52.1 x 28.7 x 17.1 cm)
• Divider System: Full sewn tub with flex exterior, velcro compatible nylex interior, elastic straps. Set includes 1 tub and, 2 large dividers, 6 medium dividers, 3 small dividers
• Based on the popular Pelican 1520 Case and now 40% lighter than other polymer cases using Pelican't lightweight HPX resin. Includes Pelican's Lifetime Guarantee.
• Crushproof, dustproof, with a watertight o-ring gasket and an automatic purge valve that balances air pressure inside the case
• Features double-throw latches, stainless steel hasp protectors, rubber overmolded handles, and a card holder for front or side placement.

• Interior Dimensions L22.0 x W17.0 \" x H12.9\"| Exterior Dimensions L25.4\" x W20.0\" x H14.5\" | Includes 4 layer cubed foam insert with base pad and lid foam
• Waterproof (IP67 rated), dustproof, shockproof | Automatic purge valve equalizes pressure on the inside of the case when travelling
• Designed for mobility with a 2-stage retractable pull handle with quick release button and smooth rolling polyurethane wheels
• Four Powerclaw (patented) triple action latches molded in super-tough Nylon keep the case securely closed using compressive force

• Patented latches allows you to close the case with just one finger
• Automatic Air Valve enable the automatic adjustment to the environment and makes the cases TSA airlines friendly
• Rubberized Handles makes the cases a joy to use and own
• Retractable Handle:Locks in the extended and closed position for stability and control
• Off-Road Style Wheels: You won't find these anywhere else. Wider wheels means more stability and better performance on dirt, sand and grass.

• CAMERA/LAPTOP GEAR CAPACITY 1-2 Mirrorless, DSLR or Cine cameras (up to pro size w/ grip/booster) with 7-9 lenses, up to 400mm 2.8, plus a laptop up to 17 inches (43 cm). Also fits DJI Mavic and other compact drones.
• HIDDEN BLUETOOTH TRACKER POCKET COMPATIBLE WITH AIRTAG AND TILE Special neoprene sleeve securely fits an AirTag or Tile Bluetooth Tracker so you can always find your camera bag.
• 3-POINT CAMERA ACCESS Exchange camera gear through the side, top or rear of the bag. Side Access for quick camera removal while wearing the bag, Top Access to work out of the bag within a small footprint, and Rear Access to get at all your gear at once.
• AIRFLOW HARNESS WITH DUAL STERNUM STRAPS The Airflow harness combines ventilating 3D airmesh and Tenba't Pivot-Fit auto-adjusting straps to ensure a comfortable fit. Unique dual sternum straps significantly improve the load balancing across the chest, with significant benefits for female and male customers alike. Bottom sternum strap can be removed if desired. Rear panel also includes a trolley strap for secure piggyback travel through airports.
• REFLECTIVE MOLLE WEBBING Allows limitless expandability with Tenba Tools Lens Capsules, Battery Pouches and Memory Card Wallets, as well as military-standard pouches and accessories. Tenba't MOLLE webbing includes a subtle thread that is highly reflective to ensure safety when walking or riding a bike near cars at night.

• Comes as an empty case (no foam)
• Exterior Dimension (LxWxD Inches): 26.61 x 20.65 x 14.87 | Interior Dimension (LxWxD Inches): 23.43 x 17.55 x 13.25 | Weight 15.20 lbs
• Crushproof, dustproof, with a watertight o-ring gasket and an automatic purge valve that balances air pressure inside the case
• Features rolling stainless-steel bearing wheels, extending trollery handle, push button latches, stainless steel hasp protectors, rubber overmolded handles, and a card holder for front or side placement
• Made with Pelican's super-light proprietary HPX polymer

• Dimensions External: 30.71\" x 17.71\" x 16.53\" Inner: 26.93\" x 14\" x 13.7\" Weight: 24 Lbs, 90 liters.
• Meets TSA Requirements, easy to close lock down latches and quarter inch pad-lock fittings allowing for secure storage at home or on the go.
• Stackable design allows models of the same size to stack on top of each other. Holds up to 220 pounds easily with padded side handles and is heat resistant up to 212 degrees.
• IPX4 Water Resistant - Protects from splashing water, no matter the direction. A thick rubber gasket lining allows the case to close securely providing IPX4 waterproofing.
• Strap & Secure - Strapping anchor slots allow the cases to be tied down for secure transport.
• Made with food grade plastic and built-in bottle opener. O-ring seal to securely keep liquids inside and drain plug to empty excess liquid.
• Limited Lifetime Warranty

• Dimensions External: 30.71\" x 17.71\" x 16.53\" Inner: 26.93\" x 14\" x 13.7\" Weight: 24 Lbs, 90 liters.
• Meets TSA Requirements, easy to close lock down latches and quarter inch pad-lock fittings allowing for secure storage at home or on the go.
• Stackable design allows models of the same size to stack on top of each other. Holds up to 220 pounds easily with padded side handles and is heat resistant up to 212 degrees.
• IPX4 Water Resistant - Protects from splashing water, no matter the direction. A thick rubber gasket lining allows the case to close securely providing IPX4 waterproofing.
• Strap & Secure - Strapping anchor slots allow the cases to be tied down for secure transport.
• Made with food grade plastic and built-in bottle opener. O-ring seal to securely keep liquids inside and drain plug to empty excess liquid.
• Limited Lifetime Warranty

• For cameras or camcorders
• Made of canvas and leather
• Protect your devices

• Made of Ultra-High Impact structural copolymer that makes it extremely strong and durable
• Unbreakable, watertight, airtight, dustproof, chemical resistant and corrosion proof case
• Includes a six-piece foam set that consists of one \"egg crate\" foam upper section, four Pick 'N Pluck foam sections and one 1.0\" blank bottom foam section
• Built-in purge valve for changes in altitude or temperature.
• Watertight to 30'.

• Interior Dimensions L16.6\" x W11.3 x H5.4\" | Exterior Dimensions L18.6\" x W14.4\" x H6.3\"
• Waterproof (IP67 rated), dustproof, shockproof | Automatic purge valve equalizes pressure on the inside of the case when travelling
• NK-7 resin is incredibly impact resistant | NANUK cases are designed to survive the toughest journey
• Two Powerclaw (patented) triple action latches equipped with TSA compliant key locks | Latches molded in super-tough Nylon to keep the case securely closed
• Limited lifetime warranty

• Large Capacity Inner dimension: 36.6\"x13.4\"x11\"/93*34*28 cm; Outer dimension: 39.4\"x14.6\"x13\"/100*37*33 cm; Net weight:16.8 Lbs/7.6kgs; Max. Load: 88 Lbs/40 kgs. Ideal to pack light stands, studio lights, umbrellas, soft boxes, camera and photo accessories.
• Extra Reinforcement Comes with reinforced armors on the corners and rivets on the carrying strap.
• Big Zipper Puller The outer zipper puller is big and lockable, more durable to use.
• Convenient Function Adjustable lid straps keep it open and accessible. Extra inner zippered pocket for storage.
• Premium Material The exterior cloth is water resistant premium 1680D nylon. Solid inner plastic wall structure makes it strong and durable. The high quality casters are durable and smooth.
• Notice: This rolling bag is not recommended for airline travel.

• Upgraded version of the classic 'Billingham Hadley Pro' Camera Bag.
• Removable padded insert to turn the bag from a camera bag to a casual bag in seconds.
• Fabric has layer of butyl rubber sandwiched in the middle for the ultimate in weather resistance.
• Zippered pocket with rainproof zip & luggage trolley retainer strap on back.
• Leather under top handle for added comfort while carrying.

• Watertight with Automatic Pressure Equalization Valve
• Reinforced padlock protectors
• Stainless steel ball bearing wheels
• Single Layer padded dividers with Velcro adjustments; Exterior Dimensions: 22\"L x 13.81\"W x 9\"D (55.9 x 35.1 x 22.9 cm); Interior Dimensions: 19.75\" x 11.00\" x 7.60\" (50.1 x 27.9 x 19.3 cm)
• Lid Depth- 1.79 inch, Bottom Depth-5.79 inch, Total Depth-7.58 inch,Interior Cubic Volume-0.96 cubic feet (27.06 cubic decimeter)

• Time Lapse Camera TLC300 x 1
• Waterproof Housing ATH120 x 1Waterproof Housing ATH120 x 1
• Bungee Cords x 2
• AA Batteries x 4

Popular Categories on BuyBestBrands.in