Flash Accessories By EDASH

• With this PowerTap Receptacle, you can expand any Power Tap to accommodate up to four separate, perfect for powering multiple wireless receivers, on-board monitors as well as an Ultralight from a single camera Power.
• Male D-Tap to 4 female D-tap Hub
• Material: ABS
• Cable Length: Approx. 60cm / 23.62inch

• The cable designed for all Qualcomm phones to put them into Deep Flash Mode
• This cable will help you to flash, unlock, read pattern lock on all Qualcomm phone
• Easy to install and use
• Light Weight And Space Saver

• Camera Flash Hot Shoe Mount Adapter with 1/4 Inch Screw.
• Standard 1/4 thread, for camera flash, LCD monitor, external microphone, LED light, etc.
• Detachable copper nut, suitable for 1/4 screw base or light holder.
• Cold feet design, supports standard hot shoes.

• Grid is used on a softbox to control light spill and tighten the total coverage area;this can be particularly helpful in tight environments.
• The soft, even light quality of the boxes remains, but the grids allow you to have more directional control over the output.
• The grid is made of black special fabric, with honeycomb-style design and paste sewn around the sides, can be respectively fastened to the inner side of the 60 x 90cm/23.6&x 35.4\"softbox.
• Suitable for special portraits or products , resulting in a different light and dark raster effect.

• Universal handle grip features standard 1/4&screw on top.
• 360 Degree rotate head, suit for different angles shooting.
• The bottom with 3/8 screw hole, can be connect with tripod.
• Metal construction body with durable rubber on surface, anti-slip design, convenient and comfortable to use.

• With this dual-mounted converter, you can use two cameras, which can be used for both front and back , or you can use it for GoPro Hero action cameras and LED lights.
• Perfect for your camera and underwater light if you want to use them at the same time.
• Made of PVC , lightweight and easy to carry.
• Length of dual flash bracket tripod mount is 8.8cm,approximately 3.46inch.

• Transparent colored sheets with size 15.7 x 9.6 in/ 40 x 50 cm.
• Made of high light transmission materials with light weight, steady color temperature and low loss.
• Color filters are used for lighting effects and color correction, involving additive and subtractive color, color mixing, color transmission, absorption and filtering of the different wavelengths of light.
• Use combinations of these filters to create different effects; Perfect for Photo Studio Strobe Flash Light LED Lights.

• Cold Shoe could be mounted on any camera accessories with 1/4&and M2.5 threaded holes, such as cage, cold shoe block, handle and plate etc.
• The counter bore hole in the center is attachable to a 1/4&screw, but the 1/4&screw will not touch the hot shoe contact of accessories mounted on the cold shoe.
• There comes with two secure bending bevels on the one end to prevent accidental removal.
• With a stop screw on the cold shoe to prevent shoe mount accessories from accidentally sliding forward and keep your accessories slide perfectly in right place.

• Softbox Flash Diffuser:Help eliminate harsh light and shadow and can help leave your photos looking more natural.
• Ring-shaped design to spread the effects of the flash wider through a room and to make the flash a little less direct.
• Pure white surface to prevent from ending up throwing colored light onto the scenes.
• Grey card on back will help set exposure and white-balance.

• 7\"/18cm Reflector diffuser cover fits for almost standard 7\"/ 180mm diameter round studio strobe reflectors, bowen mount reflector and more.
• The 7&white diffuser sock softens the light and balance the white light output.
• The diffuser sock ringed with strong elastic fit around reflectors to ensure even light output.
• Strong elastic diffuser sock fits around reflectors perfectly.

• Camera Lens Diffuser Reflector Kit for Studio Flash Speedlight Accessory Kit.
• Translucent diffuser over the camera lens, creating a soft lighting effect when using the camera flash.
• Suitable for portrait photography, to adjust the lighting and reduce the shadow.
• Small size, easy carrying, can be folded in the storage bag included.

• Mounting Cut Hole: 6mm
• Lamp Voltage: 220V AC
• Scope of application: industrial control equipment, automobile and motorcycle modification, home appliance modification, power distribution, telecommunications, machine tools, machinery, electrician.
• LED lamp with waterproof ring, flame retardant base, fire-retardant metal materials.

• This is 7- 11&reflector diffuser sock for almost standard 11\"/ 270mm diameter round studio strobe reflector, Bowen mount reflector and more.
• The 11&white diffuser sock softens the light and balance the white light output.
• The diffuser sock ringed with strong elastic fit around reflectors to ensure even light output.
• Designed with elastic edge.

• Mounting Cut Hole: 6mm
• Lamp Voltage: 220V AC
• Scope of application: industrial control equipment, automobile and motorcycle modification, home appliance modification, power distribution, telecommunications, machine tools, machinery, electrician.
• LED lamp with waterproof ring, flame retardant base, fire-retardant metal materials.

• Attachable to a range of different photography accessories such as studio light stand, hot shoe/cold shoe adapters, ball heads, wireless flash receivers, triggers and more
• Precision made spigot with 1/4-inch male to 3/8-inch male threaded screw adapter
• Easy to assemble and disassemble by hand
• All-metal material, electroplated surface, anti-wear, anti-oxidation, durable features

• Designed with 1/4" screw hole, and comes with 1 piece of 1/4" adapter screws and 12 piece of hot shoe mount adapter
• Can support 2 cameras or flash units by hot shoe mount adapter at the same time.
• Securely mounts to camera hot shoe and easy to install.
• Detachable Flash Mount Shoe, can also be fixed on the tripod, to use the flashgun off the camera.

Popular Categories on BuyBestBrands.in