Electronics Store - Cameras - Camera Accessories - Photo Studio And Lighting

• Non-electrically conductive nylon E27 thread.
• Nylon base expands to junior 1/8\" size above threads.
• Baby 5/8\" aluminum pin on top.

• Spring Cushioned Haevy Duty Stand The built in spring cushion protects your equipment, perfect for mounting LED video lights, ring lights, monolights, strobes, softboxes, reflectors, and other photography gear. Load Capacity: 22lb / 10kg
• Reversible 1/4 to 3/8 Adapter With 1/4 & 3/8 threaded ends, the universal screw adapter is compatible with different accessories and light fixtures. A 3 way mounting interface allows you to mount in vertical and horizontal orientations
• Solid Construction Made of 100% tough stainless steel, the light stand is impressively durable and resistant to corrosion and moisture for outdoor shooting tasks
• Adjustable Height 3.2 - 7.2ft (97 - 220cm) adjustable, this telescopic stand with 3 sections offers a broad height range for flexible positioning. Locking knobs secure the stand with incredible strength
• Collapsible Design The light stand can fold down to a compact size for storage and transportation. Sandbags (sold separately) can be placed on the legs for added stability

• Soft Wrap-Around Quality of Light
• For All Godox Full Size Flash Heads
• Widely Compatible Bowens Speed Ring

• 5-in-1 23.6x35.4inch Handle Reflector -- Comes with silver, gold, black, white cover cloth and translucent surfaces, which can meet your different photography needs and improve the efficiency of your photography.
• Adjustable Light Stand -- The height can be adjusted from 26.7in/67cm to 78.7in/200cm. Equiped with 1/4\" screw on the tip, also can be used for mounting strobe lights, reflectors, umbrellas, soft boxes and other photographic equipment.
• Reflector Holder Clamp: Made of aluminum alloy with the anodized treatment, this backdrop holding clip is lightweight but durable. Perfect for positioning your reflectors. This handy tool is helpful for creating maximum lighting impact.
• Convenient Operation -- Easy to assemble and use, which just attach the photography reflector to the stand via the reflector clip, Great to use without any assistant.
• Wide Application: The 5-in-1 reflector kit is suitable for indoor or outdoor photography; the light stand can be used to mount strobe lights, reflectors, umbrellas, softboxes and other photography equipment; the clip can easily attach to the light stand and hold the reflector.

• Winged design allows this bag to be draped over stands or booms.
• Marked on the Blue label for easy weight identification.
• Built-in handle allows for easy transportation between shoots.

• Portable Square Small Softbox This 15.7\"x15.7\"/40 x 40cm relatively mini softbox features a glossy silver lining that broadens and diffuses the output while retaining neutral color rendering index (CRI) and color temperature. The even light distribution can minimize blemishes and shadows, smoothen your skin and define facial structures
• Lightweight Nylon Alloy Quick Folding Design Lift the ribs and click into place, and press the quick release buttons to fold up. Four highly resilient ribs offers incomparable durability that can withstand tens of thousands of presses without deformation. Even the mounting plate is upgraded with nylon alloy to ensure its lightweight yet durable design that is robust, anti rust and can withstand daily wear
• Customizable Honeycomb Grid & Diffusers For various shooting scenarios and photography styles - be it portrait, still life, or live streaming, a honeycomb grid makes lighting more confined and directional, and two diffusion panels attaching via touch fasteners can soften glare and eliminate shadows
• Attach Via Bowens Mount This photography softbox diffuser with standard Bowens mount is compatible with various studio lighting equipment, strobe flashes speedlights monolights, and continuous output COB LED video lights, including NEEWER Vision 4 Q4 CB300B CB200B FS150B CB100C MS150B MS60C MS60B CB60 RGB S101-300W/400W PRO, compatible with Aputure 300c 200X 60D 60x S, compatible with Godox SL60w, compatible with SmallRig RC 120D RC 120B, etc
• Collapsible Soft Box with Drawstring Bag At merely 1.48lb/0.67kg, it can be folded (15.7\" x 7.5\" x 7.5\"/ 40 x 19 x 19cm), and effortlessly slip into the drawstring carrying bag. This portable softbox is ideal for handheld outdoor shooting with our MS60B MS60C MS150B Q4, including weddings, parties, portraits, product photography, beauty & fashion shoots, weddings, corporate headshots, and other photography styles

• [Versatile Length Options] - The adjustable telescopic boom arm offers a wide range of length options, allowing photographers to capture shots from various angles and heights. Its flexibility ensures versatility in different shooting scenarios.
• [Precise Positioning Control] - The stand's independent tilt, pan, and arm lock knobs provide precise control over the positioning of the boom arm. This ensures the equipment's safety and stability, allowing for smooth and steady shots.
• [Easy Device Attachment] - With a comfortable padded grip on one end and a 1/4\" stainless steel threaded screw on the other, the boom arm allows for easy attachment of additional devices such as cameras, lights, or microphones. This expands the shooting possibilities and enables creative setups.
• [Enhanced Stability with Weights] - The inclusion of weights significantly enhances the stability of the boom arm. They prevent tipping and maintain balance, especially when dealing with heavier loads. This ensures the safety of the equipment and minimizes the risk of accidents.
• [Portable Design] - The boom arm's shrinkable design and rubber pad feet make it highly portable and suitable for both indoor and outdoor shooting. It can be easily folded and transported, while the rubber pads protect the floor from scratches.

• A Liberating Light : A2 weighs about 2 smartphones that you could barely feel it in bag, whiletube shape saves the trouble for space taking. As on location or travellingstudios,work with such portable light will be a liberating experience youhave never had before.
• Reliable Color Rendering :With a RA rating of 95 and a TLCl rating of 97, it delivers vibrant, naturallight and reproduces accurate colors.
• A Color Library : Adjust in RGB,CCT, HSI three modes to reach up to 36000+ colors, and 29 FX at three tunable levels.Just takethis magic rainbow in your pocket.
• Fit Anywhere :With embedded magnet, just a metal surface is where A2 can beattached. Screw hole at both ends for you to mount it on a stand.Moreconvenience comes with it being freely placed in corner, against wall,or any narrow space for illumination.Almost fit anywhere,A2 getsyou the flexibility you want for shooting any place.
• Light without Footprint :lt is easy to hide A2 behind subject for a cleanbackground, which highly levels up your efficiency.For a close-distance shooting, you are free to placelights around with the footage kept undisturbed,less time on edit, more time to create.

• Simple Soft Light The Aputure Light Box 45x45 is a compact Bowens Mount Square Softbox. Designed with creators, photographers, and filmmakers in mind, the soft light box transforms hard point-source LEDs like the amaran COB 60D S COB60X S series into lightweight soft lights for all forms of content creation, from portraiture to product photography
• Soft and Square Measuring 45x45 (~18x18in) with a depth of only 30cm (12in), this new Light Box is Aputure's most compact and portable Bowens Mount softbox to date. Its square diffusion area is greater than 1x1 LED panels, resulting in a softer light that works perfectly in any 3-point lighting setup for on-the-go content creation, livestreaming, and photography
• Perfectly Portable Weighing only 0.68kg (1.5lbs), the Light Box 45x45 is perfect for run-and-gun content creation, shooting in tight spaces, or as an LED photography softbox. For a quick and easy set up, simply pull the soft box out of its included flat-pack carrying bag, connect the 4 rods, and you?re ready to light. The softbox(built) Dimension 45*45*30 cm/15.74*15.74*11.81in, softbox(Collapsed)Dimension 48*26*50cm/18.89*10.23*1.18in
• Travel Light Pair the Light Box 45x45 with the amaran COB 60d or amaran COB 60x and its matching Handheld Bracket for amaran COB 60d/x to create the ultimate lightweight travel LED kit. This entire handheld lighting kit easily packs into a backpack so it can accompany you to any location, near or far. Set it up in minutes for a mobile key light or fill light that adapts to your shoot
• Universal Bowens Mount The Light Box 45x45 is designed to work in tandem with the many Bowens Mount LED lights in the Aputure and amaran ecosystem. With its lightweight design and included Bowens Mount speed ring, this soft box pairs excellently with lights ranging from the ultra-compact amaran COB 60d/x to the amaran 100/200 series, and even the Aputure LS 300d II and 300x
• Master Lighting Control To achieve the perfect soft light for your content, the Light Box 45x45 includes two diffusion fabrics for different levels of softness (1.5 and 2.5 stop). Every Aputure softbox also includes a 45 degree fabric control grid to focus the light spread on your subject. Simply attach the grid on top of your diffusion to craft the perfect shot

• Soft and Square: Measuring 45x45 (18x18in) with a depth of only 30cm (12in), this new Light Box is Aputure's most compact and portable Bowens Mount softbox to date
• Perfectly Portable:Weighing only 0.68kg (1.5lbs), the Light Box 45x45 is perfect for run-and-gun content creation, shooting in tight spaces, or as an LED photography softbox. For a quick and easy set up, simply pull the soft box out of its included flat-pack carrying bag, connect the 4 rods, and you?re ready to light
• Travel Light:Pair the Light Box 45x45 with the amaran COB 60d or amaran COB 60x and its matching Handheld Bracket for amaran COB 60d/x to create the ultimate lightweight travel LED kit
• Universal Bowens Mount: The Light Box 45x45 is designed work for Bowens Mount LED lights. With its lightweight design and included Bowens Mount speed ring, this soft box pairs excellently with lights ranging from the ultra-compact amaran COB 60d/x to the amaran 100/200 series, and even the Aputure LS 300d II and 300x
• Master Lighting Control: The Light Box 45x45 includes two diffusion fabrics for different levels of softness (1.5 and 2.5 stop). Every Aputure softbox also includes a 45 degree fabric control grid to focus the light spread on your subject. Simply attach the grid on top of your diffusion to craft the perfect shot

• The Knowled M600Bi Bi-Color LED Monolight from Godox has an adjustable color temperature range from 2800K to 6500K, and claimed CRI/TLCI ratings of 96/97.
• As well as being able to adjust the intensity and CCT on the fixture, you can also make changes wirelessly with 2.4 GHz bandwidth, DMX, or Bluetooth.
• The light has four dimming curves and Godox claims that the color temperature remains constant regardless of the intensity level.
• The light runs on universal 100 to 220 VAC current via the included controller, or you can use an optional V-mount battery when AC power is unavailable.
• Power comes from the wall or a V-mount battery, and the AC/DC flexibility allows you to use the light in the studio or on location in the field. The light is also compatible with Bowens S-mount accessories for all your light-shaping needs.
• Power, dimming, and 21 simulated light effects can be controlled by wireless Bluetooth (Godox Light APP), onboard controls, or DMX interfaces. The unit is cooled by a near-silent internal fan.
• Package Include:- 1*Controller, 1*Flash Cover, 1*Pro Reflector, 1*Power Cord, 1*Connecting Cord, 1*Controller clamp, 1*Fixed Rope, 1*Portable Case, 1*Lens paper

• Dimming control adjustable in 0.1 to 10% increments gives you the exact brightness you need without the need for ND filters
• Built-in special effect modes for broken bulb, flash, lightning, and TV
• Accept Bowens S-mount light modifiers and accessories
• Optional scientific dimming curves for Linear, S-curve, Exp, and Log provide unique output behaviors catered to diversified settings and applications
• Versatile support for AC and DC power supplies and runs on 100-240 VAC power for worldwide use

• the Parabolic 158 Reflector from Godox features a highly reflective silver interior with a 59.1\" outer diameter. The parabolic shape offers clean and specular highlights while also providing a broad light source that wraps around your subject.
• The PF-M Focusing Mount from Godox is an adjustable and tiltable adapter, which enables you to connect a parabolic reflector with a light stand. Additionally, it connects a parabolic reflector and focusing rod with a compatible strobe adapter mount.
• The Bowens Strobe Adapter from Godox allows you to mount a Bowens-mount strobe to a Parabolic 68, 88, 128, or 158 reflector. It connects to a focusing rod that connects to the PF-M Focusing Mount.
• This PF-R870 Focusing Rod from Godox is compatible with the Parabolic 128 and 158 reflectors and connects the PF-M focusing mount to a PF-series strobe adapter.
• The CB35 Carry Bag from Godox measures 37 x 12 x 10.6\" and lets you store, protect, and transport your photo and lighting gear.

• 4 Tube Lights with Built-In Batteries
• Color: 2700-6500K, CRI/TLCI: 96/98
• Built-In Rechargeable Battery
• 0-100% Dimming & RGB Control
• Phone, DMX, 2.4 GHz Wireless Control

• Optional in multi-pack - HYPERLITE reflectors are available in 1-pack, 2-pack, 4-pack and 10-pack. The more you buy, the more affordable the reflectors are. Please note that the purchase links are different. Please check out the details of multi-pack reflectors on the following A+ page or contact us via message.
• Specially Designed for HERO Series High BayThe HERO series of high bay lights are equipped with a 120-degree lens, which provides a wide range of lighting. And this acrylic reflector has a 60-degree angle, which can make the light more concentrated. If you have purchased a HERO series lamp and don't want the light to be too scattered, you can choose this 60-degree reflector to make the light more concentrated.
• Reduce GlareThis acrylic reflector can effectively reduce glare, making your lights look softer and more comfortable.
• Two-Step Easy Installationthe first step is to fix the cover on the HERO series lamp with 4 screws; the second step is to connect the bottom to the cover with an iron ring and fix it with a spring. The installation can be easily completed in 2 minute, making your lights look like works of art.
• Trust Warranty and Professional Services?Please feel free to contact us if you have any questions or need any help, HYPERLITE will reply you within 24 hours to help you solve the problem.

• Creates a soft and flattering light.
• Deeper shape and recessed front for precise control.
• Double-layered diffusers and a highly reflective silver interior.
• Color-coded rods and Velcro attachments mean hassle-free assembly and disassembly.
• Requires an RFi Speedring (sold separately). Offered for all major flash brands.

Popular Categories on BuyBestBrands.in