Electronics Store - Cameras - Camera Accessories - Tripods And Monopods

• Mobile clip holder for monopod, tripod with Mini Padlock
• Suitable for various kinds of cell phone, such as iPhone, HTC, Samsung. Contents 1 x Phone Holder
• Height of Tripod is Approx 42 Inches Same as that of a Common Person to use it comfortably It can be fixed on Any Camera, Ring Lights and Mobile Phones. Extra Clip Mobile Holder is provided in the package It Can Rotate in any Direction. Direction and angles of shooting can be changed by Tilt and Pan through Tripod Head Increase or decrease the height by opening clips in legs of tripod. Height of the Center Shaft is moved up/down by rotating Gear no-2 given in the Picture
• Comes with silicon Tip which is gentle on your mobile and will never scratch your mobile while mounting, Allowed Cell Phone width : - 55mm - 85mm
• Please watch the video attached for its instructions and assembling of tripod

• Attached to any Standard Tripod Attach to any standard tripod which has universal standard 1/4\" mounting hole screw.
• Adjustable The clip holder can be expanded from 2.17\" to 3.37\" (5.5cm to 8.5 cm) wide, which made it compatible with most smart phones.
• Grasps your Device Firmly The clip holder will hold your device firmly, just enjoy your time while recording video, taking pictures, or to use your phone as a webcam.
• Protect your Device Thanks to the PVC rally glue, your phone screen is untouched by the tripod connector, so you don't have to worry about scratching, cracking, or leaving marks on the screen.
• Anti-shock Both sides of the card slot and the front are equipped with cushions, two-tier reinforced sponge fixture, prevent your device from falling down and anti-shock.

• 3 Leg Section, Aluminum Oval Section Material, 3-way Panhead, 2 Pin Platform, One Bubble Level, Self Levelling, Radial Tri-brace, Leg Brace with Lock, Geared Elevator, Elevator Friction.
• Maximum Height 1658 mm, Weight 2160 g.
• 26.8 mm Leg Diameter, Feet, Air Cushioned, Fluid Head.
• Folded Length 661 mm. Contents: Tripod VCT880 - 1 Nos, Carry Bag - 1 Pc.

• 1/4\" Screw Mini Tripod Stand for Stabilizer-can be used on stabilizer like DJI OM 4 OSMO Pocket OSMO Mobile 3 2 Zhiyun Smooth Q 4 Moza Hohem, so can stand on the table or floor, enjoy your video shooting or photography.
• Mini Tripod Stand for Selfie Stick- Can be installed on selfie stick, release your hands and enjoy your selfie freely. Perfect vlogging accessories.
• 2 in 1 Multi Use- Flexible switch from tripod into handle , no need to take it off and easy to be fold up for quick storage. Foldable mini tripod.
• Super Lightweight- Only about 50g, suitable for all kinds occasions.,like youtube live streaming/traveling/interviewing/vlogging etc.
• Stable Shooting-Shoot still and movie images better with our mini tripod, no need to worry shaking. Also there's rubber pad on top and tripod legs to support safe and stable stand.

• Premium finish light weight professional tripod with adjustable height, multi level locking and steady rubberized legs
• Compatible with most video cameras, digital cameras, still cameras, GoPro devices and smartphones
• Special Features: Features with a pan-tilt-swivel head with bubble leave; Special Features 2: 3 Section Legs, extendable legs
• Built-in bubble head to adjust horizontal position and 3-way head with adjustable pan to allow for tilt and swivel motion with portrait or landscape options
• Level tester:This tripod equipped with level tester, which can detect and adjust the horizontal position of it. When the ground is not level, you can recognize it immediately and adjust the tripod leg to keep level.

• Universal Phone Holder: This is a 100% Brand new with excellent quality, phone bracket is automatic elastic, stretch can clip 5.5-8.8cm width's phone. Phone bracket is adjustable and lightweight, easy to use and carry with. With standard tripod hole, you can install in any 1/4\" tripod stand.
• 3-Way Head:The tripod's three-way head allows for ultimate versatility. Easily change the orientation of the camera from portrait to landscapeand almost any angle in between with the handy tilt motion. Turn the knobs to secure. The tripod also allows for full panoramic possibilities with its 360-degree swivel function
• Centre Shaft Jacking System:Turn this button lightly to control jacking system. When the button is loose, the center shaft can up and down easily. When the button turn to tight, the height can be fixed. Camera can up and down smoothly and moving stably. The fully extended length can up to 105cm.
• 4-Section, Lever-Lock Legs:Uneven terrain? Need to frame the shot just so? The tripod effortlessly accommodates custom set-ups thanks to its lever-lock legs, each with four extendable sections.The leg height can be individually adjusted as needed or all three legs can be raised to the full height of 105cm.

• Level tester:This tripod equiped with level tester, which can detect and adjust the horizontal position of it. When the ground is not level, you can recognize it immediately and adjust the tripod leg to keep level.
• Centre Shaft Jacking System:Turn this button lightly to control jacking system. When the button is loose, the center shaft can up and down easily. When the button turn to tight, the height can be fixed. Camera can up and down smoothly and moving stably. The fully extended length can up to 105cm.
• Material: Aluminium Alloy,Three-Way Head:The tripod's three-way head allows for ultimate versatility. Easily change the orientation of the camera from portrait to landscapeand almost any angle in between with the handy tilt motion. Turn the knobs to secure. The tripod also allows for full panoramic possibilities with its 360-degree swivel function.
• Special Features: Features with a pan-tilt-swivel head with bubble leave; Special Features2: 3 Section Legs, extendable legs

• Fit into the 1/4\" thread tripod or light stand.
• Work with universal camera speedlite flash.
• Metal Cold Shoe Flash Stand with 1/4\"-20 Tripod Screw. Bullet Point
• This adapter can connect FLASH Shoe to 1 / 4 \"-20 screw with COLD-SHOE Lock.
• It can install FLASH to camera tripod.

• rugged design and construction, smooth, fast tracking horizontally and vertically
• horizontal adjustment of the lens platform allows precise positioning to find the center of gravity of any size lens and camera system
• calibrated scale for repeatable positioning of lenses
• the panning base and vertical arm capable of 360 degree rotation(horizontal and vertical),can meet the photography demand of different angle.
• includes arca-swiss type standard 1/4'' quick release plate and bubble level. non-skid slip design on arca-swiss standard quick release plate
• Included components: Gimbal Head

• HIGHER ADJUSTABLE HEIGHT - lightweight tripod is 20 inches longer than other normal tripods for your desired height, which could help you get more wonderful scenery; It can collapse to shorter height 16 inches with 3-section and flip-lever leg locks.
• STABILITY - Leg braces and rubber feet makes position safe and sturdy in most wind, which plays an important part in your travel; The maximum load capacity is 6.6 LB, no recommend for use with heavy and high-end equipmentSTABILITY - Leg braces and rubber feet makes position safe and sturdy in most wind, which plays an important part in your travel; The maximum load capacity is 6.6 LB, no recommend for use with heavy and high-end equipment.
• LARGER PLATE & 3-WAY HEAD - Comes with Larger plate, which keeps more stability for your cameras than other tripods with narrow plate; It allows for pan and tilt motion, meeting any angle that user needs; Standard 1/4\" Camera Mounting Screw with connected plate helps convenient installation.
• 3-Way Head:The tripod's three-way head allows for ultimate versatility. Easily change the orientation of the camera from portrait to landscapeand almost any angle in between with the handy tilt motion. Turn the knobs to secure. The tripod also allows for full panoramic possibilities with its 360-degree swivel function.
• COMPATIBILITY & EASY TO CARRY - Digital camera, IPhone adapter(Not included) and laser level as well as rangefinder can be firmly put on the lager plate; Takes with zippered storage bag for convenient carry and safe storage.

• DESIGN - The tripod allows your phone to be mounted on a flat desktop or uneven surface, making it the best option for recording wonderful moments. The design of OCTOPUS legs can be twisted into any shape, wrap it on the tree, bike, lamp, chair
• FLEXIBLE LEGS - The tripod legs can be bent into different shapes and stand stably on uneven places. Or you can wrap it on desk, table, around the tree branch and so on
• COMPACT AND LIGHTWEIGHT - This tripod is perfect to throw in your bag. Every cameraman needs a tripod, Compact in size and convenient to carry. Enables extra security to ensure your camera is safely attached
• SPECIFICATIONS - * Length max height: 9.4 inch / 240mm, * Net weight: 230g, * Load capacity: 1.5kg, * plate with 1/4\" screw
• COMPATIBLE - This flexible tripod is compatible with smart-phones, digital compact cameras, mobile phones, etc. Simply secure your device
• SPECIFICATIONS - * Max. working height: 240mm, * Min. working height: 50mm, * Folded height: 240mm, * Net weight: 230g, * Load capacity: 2kg, 1/4\" & 3/8\" screw

• Now Shoot at any Angles, with Any Size upto 7.5 Inches
• 1- Ball Head Metal & 1- Tablet Mobile Phone Holder
• Mount your Ball Head on Tripod and Open the option of Rotate, Tilt & Pan of the device used on it like Light, Video Camera, Camera, DSLR. for your Photo Session, Video Recording or making clips and movies..To Use the option for Smart Phone, You need Mobile Holder which is provided in the Package
• This Hot Shoe Adapter has a 1/4 inch threaded stud on the bottom and flash shoe on the top. 1/4\" Hot Shoe Adapter Cradle Ball Head with Lock for LED Light Flash Camera Tripod Bracket Holder Mount
• Make in INDIA

• 3 way pan heads with quick release plate
• 3 way pan heads which can operate top and bottom, right and left, vertical position each
• Attachment and detachment of Cameras adopts brief quick release plate in one-touch

• This mini tripod adapter can hold your iphone or smart phone without you having to use a gorilla tripod to mount the holder on top as this holder mount has an extended section that you can hold and record your vlogs or take pictures with ease.
• This tripod mount holder has a 360 degree rotation to its frame which enables you to record any audio or video footage at any angle in portrait mode or landscape mode you want without needing you to change the angle of your gorilla tripod stand!
• Most Tripod holders only stretch up to 82 mm at max while this tripod holder can stretch up to 110 mm which can accommodate big mobiles as well!
• This tripod bracket mount contains a screw on back side which helps you set your mobile phone at an angle you want and once you tighten the screw you dont need to think about the holding strength of the screw in that position. It just simply does with ease thanks to the high quality steel and setting of the screw!
• No need to worry about your smart phone edges getting damaged nor will your mobile phone spring out of the holder thanks to the screw that holds the mobile tight and protects it.

• Supercardiod shotgun microphone 2ft Distance prioritise the sounds directly in front of it with high gain. It helps pick better quality sounds than normal camera/ mobile microphone. Compatible with cameras, camcorders, audiorecorders, PCs and other audio/ video recording devices, shotgun mic is unidirectional and is most sensitive to sounds in a single diretion thus exhibits proximity effect
• Tripod stand- 50\" tripod stand is a compact design, light weight stand with 1/4\" screw, quick release leg locks and 360 degree knob rotation.
• Universal LED video light- It has 3 side cold shoe mount for microphone with an array of 36 powerful LEDs with low, medium and high intensity lights. Securely connects to the shoe mount of most of the digital devices.
• Wireless remote control allows you to take pictures when you are away from the camera or mobile phone. It works with 2 feet distance.
• Mobile phone holder- Smart phone holder with cold shoe, works with on almost any product built in shoe.
• The kit contains 1 shotgun condenser microphone, 1 tripod stand, 1 LED video light, 1 smart phone holder, 1 wireless remote control,

• Wide Compatibility - The phone tripod mount can work with most smartphones with or without a phone case, Spring Design, support smartphone from 2.2- 3.93 inch wide.
• Cold Shoe Mount on Top - With a universal cold shoe mount on top, which allows adding microphones, photographic lights and other equipment,perfect for vlogging.
• 1/4'' Screw on Bottom - There is a 1/4'' screw on the bottom of the phone tripod mount, so you can mount it on any tripod which has 1/4'' thread
• Safe and Sturdy - The phone tripod mount is made by high quality ABS, can fix your phone firmly and sturdy, no need to worry mobile phone falls down.
• Super Lightweight - The phone tripod mount is only 37g, super lightweight and portable, perfect for smartphone vlogging or videomaking. Compare with sim

Popular Categories on BuyBestBrands.in