Electronics Store - Cameras - Camera Lenses

• Optically constructed of 10 elements in 9 groups (3 ED, 2 High Refractive Index)
• Aperture range of F1.8 - F22
• Uses 58mm filter size
• Features ultra multi-coated glass and 9 aperture blades
• Angle of view of 32.9 degrees on full frame and 21.9 degrees on APS-C

• This extension tube is designed for macro shooting, it is made of qualified ABS and aluminum alloy, and copper contact. It perfect matches with Sony single lens reflex camera, and support automatic focus.
• It is mount lens to shoot at closer distance with higher magnification. The set of adapters consists of 2 rings of different lengths which can be single used or be used in combination.
• Since the magnification changes according to the focal length of the lens, you can easily make close-up shots of small subjects. It enables you to use all shooting modes of the camera, exposure compensation is required.
• Extension tubes are designed to enable a lens to focus closer than its normal set minimum focusing distance. Getting closer has the effect of magnifying your subject while maintaining its original optical quality.
• When using the extension tubes alone: 10mm or 16mm, or use them in combination : 10mm+16mm=26mm, the focal length of lens should be greater than the length of the tube.
• Warranty not applicable for this product

• Allows for Canon EF EF-S lens to be used on M mount camera body.
• It will allow you to use for Canon EF EF-S manual focus lenses on Canon M series mirrorless cameras. It will work on such cameras as M M2, M3, M10 cameras.
• There is no electronic element in the adapter, aperture and focusing must be manually control.
• And you can use the maximum aperture of the EF/EF-S lens only.
• Please installing / uninstalling the adapter after turning off the camera.?

• Compatibility: The screw in lens hood is designed for Fujifilm XC 15-45mm F3.5-5.6 OIS PZ Lens and Fujifilm XF 18mm f/2 R Lens on Fujifilm X-T4 X-T3 X-T30 X-T20 X-T10 X-A10 X-A7 X-A5 X-T200 X-T100
• Flexibility: Separated lens hood and adapter ring design allows you to place backwards over the lens for more compact storage
• Compatibly: ?52mm filter and ?52mm lens cap are allowed to attach
• Professional Design: Non-glare matte finish on the inside to further prevent or limit lens flare. No vignetting with the hood on
• Protection: Protects your lens from accidental impact and the elements

• 55mm Screw In Type Bayonet Adapter With Locking Ring + bayonet lens hood
• Fits to lenses which accepts 55mm filters. Compatible With All Major Brand Camera Lenses 55mm
• Helps you get sharp, high contrast images - Protect Front Element Of Lens
• ABS Grade Plastic Material
• 3 Month Offsite Warranty - PAN INDIA

• This Certified Refurbished product is tested to work and look like new with minimal to no signs of wear & tear; the product comes with relevant accessories and is backed by a minimum six month supplier backed warranty; box may be generic
• For Canon DSLR camera
• Telephoto zoom lens
• Suitable for Canon DSLR Camera
• SP, VC, USD, IF, FTM, LD, XLD, BBAR

• Prevents Lens Flare from entering your lens.
• Helps you get sharp, high contrast images.
• Mount Type :- Screw-in with Locking RingMount Type :- Screw-in with Locking Ring
• This lens hood is compatible with all lenses that have a 58mm thread size. Please verify your camera's lens thread size before ordering. Your camera's lens thread size will be marked somewhere on the lens barrel or printed underneath your lens cap. This number is always preceded by a

• Replacement for CANON EW-53 lens hood
• Prevent unwanted stray light from entering the lens
• Extra protection from accidental impact
• For Canon EF-M 15-45mm f/3.5-6.3 IS STM Lens
• With Premier Cleaning Cloth

• F-Mount Lens/FX Format Aperture Range: f/1.4 to f/16 Four Low Dispersion Elements Three Aspherical Elements
• Wide-angle prime is designed for FX-format Nikon F-mount cameras, however can also be used with DX models where it provides a 52.5mm equivalent focal length
• Fast f/1.4 maximum aperture suits working in low-light conditions and also affords extensive control over depth of field for isolating subjects using selective focus techniques
• Four low dispersion elements are featured and greatly limit color fringing and chromatic aberrations in order to achieve higher clarity and color fidelity throughout the aperture range

• Close up, Auto-focus, Auto-exposure
• 12mm, 20mm, 36mm Tubes
• Works Individually or Combined
• Provides Macro Capability
• Macro photography

• This is used by attaching between camera body and lens of the 35mm single-lens reflex camera. Compatible for Canon all EF and EF-S lenses.
• It comes as a set of 3 tubes with different lengths (13mm, 21mm, 31mm) which singly or in combination makes it usable in 7 different lengths.
• It couples perfectly with the camera's automatic diaphragm.
• With camera of TTL, AE (Through-the-Lens, Automatic Exposure) type, it gives perfect coupling except when combined with electronic flash AE unit.
• Upgraded circuitry and gold-plated electronic contacts to greatly improve signal sensitivity for working better with DSLR cameras and compatible lenses
• Warranty not applicable for this product

• This hood is suitable for Cokin P series filter holder.
• It simply fits into the filter-holder by pressing on the upper and lower parts of the lens hood.
• Stackable design allows for the attachment of several of these hoods to one another, depending on the focal length of your lens, to allow for greater protection.
• Lens hoods are primarily designed to prevent unwanted stray light from entering the lens by extending and shading the end of the camera lens.
• The end of the lens is extended, you also get the added benefit of some extra protection from accidental impact.

• 5mm wide Leica lens
• Wide bright F1.7 aperture
• External aperture ring
• Micro four thirds mount
• Overall length of approximately 36mm from the tip of the lens to the base side of the lens mount
• Maximum Diameter: 57.5mm

• 24mm prime lens with fast f/1. 8 aperture
• Features the same dust and drip resistance of the Z Series cameras
• Powered by an ultra-quiet stepping motor

• The lens hood provides a cost-effective solution to the problems caused by sun glare rain and wind-blown debris and is also valuable in providing protection against knocks and damage.
• In addition, since the end of the lens is extended, you also get the added benefit of some extra protection from accidental impact.
• Lens hoods block side glare and augment the protection provided by filters to the lens surface and ring.
• Compatible With: Nikon AF-S Nikkor 24-120mm f/4G ED VR Lens.

Popular Categories on BuyBestBrands.in