Digital Kitchen Scales By INVENTO

• Load cell?Sturdy aluminum alloy construction with strain gauges pre-attached with strain relieved wires. Accurate measures forces from 0-10kg
• Load cell specs: 22 cm (8.5 in) wire leads pre-attached. Dimensions 12.7 mm high, 12.7 mm wide, 80 mm long (0.5 in x 0.5 in x 3.15 in). 4 mounting holes, 15 mm spacing on each side. One both holes tapped M4 thread, the other side both holes tapped M5 thread.
• HX711 :This top of the line load cell amplifier mounted on a breakout board pairs perfectly with the load cell to provide fast, accurate force measurements. It measures small changes in the resistance of the strain gauges mounted to the load cell and passes these values directly to any micro controller.
• Connection (to HX711): Red to E+ ; Black to E- ; Green to A+ ; White to A-
• Package Content: 2 x 10Kg Load Cell, 2x HX711

• Load cell?Sturdy aluminum alloy construction with strain gauges pre-attached with strain relieved wires. Accurate measures forces from 0-1kg
• Load cell specs: 22 cm (8.5 in) wire leads pre-attached. Dimensions 12.7 mm high, 12.7 mm wide, 80 mm long (0.5 in x 0.5 in x 3.15 in). 4 mounting holes, 15 mm spacing on each side. One both holes tapped M4 thread, the other side both holes tapped M5 thread.
• 5-10V drive voltage applied, the force is directly output as a voltage change signal.
• Connection (to HX711): Red to E+ ; Black to E- ; Green to A+ ; White to A-
• Package Content: 2 x 1Kg Load Cell

• Load cell?Sturdy aluminum alloy construction with strain gauges pre-attached with strain relieved wires. Accurate measures forces from 0-20kg
• Load cell specs: 22 cm (8.5 in) wire leads pre-attached. Dimensions 12.7 mm high, 12.7 mm wide, 80 mm long (0.5 in x 0.5 in x 3.15 in). 4 mounting holes, 15 mm spacing on each side. One both holes tapped M4 thread, the other side both holes tapped M5 thread.
• 5-10V drive voltage applied, the force is directly output as a voltage change signal.
• Connection (to HX711): Red to E+ ; Black to E- ; Green to A+ ; White to A-
• Package Content: 1 x 20Kg Load Cell

• Load cell?Sturdy aluminum alloy construction with strain gauges pre-attached with strain relieved wires. Accurate measures forces from 0-10kg
• Load cell specs: 22 cm (8.5 in) wire leads pre-attached. Dimensions 12.7 mm high, 12.7 mm wide, 80 mm long (0.5 in x 0.5 in x 3.15 in). 4 mounting holes, 15 mm spacing on each side. One both holes tapped M4 thread, the other side both holes tapped M5 thread.
• HX711 :This top of the line load cell amplifier mounted on a breakout board pairs perfectly with the load cell to provide fast, accurate force measurements. It measures small changes in the resistance of the strain gauges mounted to the load cell and passes these values directly to any micro controller.
• Connection (to HX711): Red to E+ ; Black to E- ; Green to A+ ; White to A-
• Package Content: 4 x 10Kg Load Cell, 4 x HX711

• Load cell?Sturdy aluminum alloy construction with strain gauges pre-attached with strain relieved wires. Accurate measures forces from 0-5kg
• Load cell specs: 22 cm (8.5 in) wire leads pre-attached. Dimensions 12.7 mm high, 12.7 mm wide, 80 mm long (0.5 in x 0.5 in x 3.15 in). 4 mounting holes, 15 mm spacing on each side. One both holes tapped M4 thread, the other side both holes tapped M5 thread.
• 5-10V drive voltage applied, the force is directly output as a voltage change signal.
• Connection (to HX711): Red to E+ ; Black to E- ; Green to A+ ; White to A-
• Package Content: 2 x 5Kg Load Cell

• Load cell?Sturdy aluminum alloy construction with strain gauges pre-attached with strain relieved wires. Accurate measures forces from 0-10kg
• Load cell specs: 22 cm (8.5 in) wire leads pre-attached. Dimensions 12.7 mm high, 12.7 mm wide, 80 mm long (0.5 in x 0.5 in x 3.15 in). 4 mounting holes, 15 mm spacing on each side. One both holes tapped M4 thread, the other side both holes tapped M5 thread.
• 5-10V drive voltage applied, the force is directly output as a voltage change signal.
• Connection (to HX711): Red to E+ ; Black to E- ; Green to A+ ; White to A-
• Package Content: 2 x 10Kg Load Cell

• Load cell?Sturdy aluminum alloy construction with strain gauges pre-attached with strain relieved wires. Accurate measures forces from 0-20kg
• Load cell specs: 22 cm (8.5 in) wire leads pre-attached. Dimensions 12.7 mm high, 12.7 mm wide, 80 mm long (0.5 in x 0.5 in x 3.15 in). 4 mounting holes, 15 mm spacing on each side. One both holes tapped M4 thread, the other side both holes tapped M5 thread.
• HX711 :This top of the line load cell amplifier mounted on a breakout board pairs perfectly with the load cell to provide fast, accurate force measurements. It measures small changes in the resistance of the strain gauges mounted to the load cell and passes these values directly to any micro controller.
• Connection (to HX711): Red to E+ ; Black to E- ; Green to A+ ; White to A-
• Package Content: 4 x 20Kg Load Cell, 4x HX711

Popular Categories on BuyBestBrands.in