Electronics By Robosoft Labs

• Robosoft Labs 8051 / 8052 Development Board with AT89S52 ( 8052 ) , MAX232 IC and PROGRAMMER
• RS232 Tx, Rx interface with MAX232 IC on socket DIL40 microcontroller socket - To Reduce Microcontroller Damages Quartz crystall 11.0592Mhz Reset button Power plug-in jack
• Extension slot on every uC pin GND bus Vcc bus. Four mounting holes 3,3 mm (0,13\")
• ISP Programming Supported (Usbasp Programmer Supported) 89v51RD2 Flasher through RS232 using Flash magic Software On board Regulated Power Supply 5v,12v supplies Easy to test with Burg Connectors wires
• An RS232 Serial Port DC Power Supply Connector (12v Ac or Dc) 4 LED array 2 Interrupt Switches

• Robosoft Labs 4 Channel +12V Relay Board Module For 8051 PIC AVR ARM Arduino AVRDuinoRASP Pi
• This is a 4-Channel Relay interface board, Be able to control various appliances, and other equipments with large current. It can be controlled directly by Microcontroller(Arduino , AVRDuino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic) .
• Features: 4-Channel Relay interface board Equiped with high-current relay, Rating are as follows: 1) 7A-250v AC 2) 10A-125V AC 3) 12A 120V DC 4) 10A 28V DC Standard interface that can be controlled directly by microcontroller (Arduino , 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic) Has the fixed bolt hole and easy installation Small board PCB size four ways of relay status indicator LED (red)
• Module interface specifications (6 wire) 1. External +12V, 2. GND external GND 3. IN1-IN4
• Note: Relay and Component Colors varies as per availability.

• Robosoft Labs 8051 / 8052 Development Board with AT89S52 (8052) and MAX232 IC's
• RS232 Tx, Rx interface with MAX232 IC on socket DIL40 microcontroller socket - To Reduce Microcontroller Damages Quartz crystall 11.0592Mhz Reset button Power plug-in jack
• Extension slot on every uC pin GND bus Vcc bus. Four mounting holes 3,3 mm (0,13\")
• ISP Programming Supported (Usbasp Programmer Supported) 89v51RD2 Flasher through RS232 using Flash magic Software On board Regulated Power Supply 5v,12v supplies Easy to test with Burg Connectors wires
• An RS232 Serial Port DC Power Supply Connector (12v Ac or Dc) 4 LED array 2 Interrupt Switches

• Robosoft Labs 30A +5V/6V Relay Board Module With optocoupler Protection For 8051 PIC AVR ARM ARDUINO
• This is a 30A +5V/6V 1-Channel Relay interface board, Be able to control various appliances, and other equipments with large current. It can be controlled directly by Microcontroller(Arduino , AVRDuino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic) .
• Features: 30A +5V/6V 1-Channel Relay interface board Equiped with high-current relay, Rating are as follows: (1) 30A 120VAC/1HP (2) 30A 240VAC/2HP Standard interface that can be controlled directly by microcontroller (Arduino , 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic) Has the fixed bolt hole and easy installation Small board PCB size Relay status indicator LED (red) With Optocoupler protection
• Module interface specifications (3 wire) 1. External +5V 2. External GND 3. CTR interchange relay control interface (3.3v or 5V Logic)
• Note: Relay and Component Colors varies as per availability.

• Robosoft Labs AVR 40 PIN DEVELOPMENT BOARD With MAX232 , ATMEGA16 IC & PROGRAMMER
• DIL40 microcontroller socket Quartz crystall 8Mhz 1 LED in PA.0 Reset button
• Power plug-in jack Extension slot on every uC pin GND bus Vcc bus. Four mounting holes 3,3 mm (0,13\")
• RS232 for Serial Communication, Supports USBasp PROGRAMMER INTERFACE
• JTAG interface ISP programming Interface Built in serial Port Built in Max232 (RS232 to TTL Converter)

• Robosoft Labs Mobile Controlled Robot (DTMF & ARDUINO BASED) DIY (DoItUrself) KIT
• In this project the robot, is controlled by a mobile phone that makes call to the mobile phone attached to the robot in the course of the call, if any button is pressed control corresponding to the button pressed is heard at the other end of the call. This tone is called dual tone Multi frequency tone (DTMF) robot receives this DTMF tone with the help of phone stacked in the robot.
• PACKAGE INCLUDES : 1) A ASSEMBLED Mobile Controlled Robot (DTMF Based) using Microcontroller DIY (DoItYourself) Kit, 2) FREE ACCESSORIES
• Note: 1) This Mobile Controlled Robot Kit is ASSEMBLED BY PRE-FABRICATED PARTS, 2) Supply : High power +9V battery supply (Batteries not Included), 3) A ASSEMBLED WORKING Mobile Controlled Robot will be sent, Its a DIY KIT that means firstly you have to disassemble the Kit by unscrewing the nuts and bolts (Disassembling is also a process of learning as well) and then assemble it according to the tutorial guide provided to you from us
• Note: Components used and its colors may vary according to availability, A TUTORIAL GUIDE TEACHING HOW TO ASSEMBLE THE ROBOT FROM SCRATCH PARTS TO A Mobile Controlled Robot (DTMF Based) using Microcontroller DIY(DoItYourself) Kit WILL BE PROVIDED through EMAIL after KIT is delivered, Mobile shown WONT BE PROVIDED, You Need a DTMF Supported Mobile to be connected in receiver end.

• Robosoft Labs 28PIN AVR's ATMEGA8 Development Board (With ATMEGA8 Microcontroller)
• This is the new 28PIN AVR's ATMEGA8 Development Board . In addition to all the features of the previous board, the AVR Development Board now uses an ATmega8 (8 KFlash Memory) which can be programmed through any AVR programming software. This allows for faster transfer rates, no drivers needed for Linux or Mac (inf file for Windows is needed).
• Features: ATmega8 microcontroller (Self Programmable) CAN be used as AVR's 28 PIN ATMEGA8 DEVELOPMENT BOARD. Buit In Power Supply : Input voltage - +7-+12V 14 Digital I/O Pins (6 PWM outputs) 6 Analog Inputs 8k Flash Memory 16Mhz Clock Speed No Need of any Programmer
• Package Contents: 1) 28PIN AVR Development Board (With ATMEGA8 MICROCONTROLLER) 2) INSTRUCTION MANUAL (Will be sent through Email) 3) DRIVER DETAILS (Will be sent through Email) 4) USB CABLE ( FOR CONNECTING AVRDUINO WITH PC/LAPTOP)
• Note: Product and components Color varies as per availability.

• Robosoft Labs AVR ATMEGA16/32 40PIN Board with ATMEGA16 , MAX232, RTC, AT24C32, ULN IC, LCD & PROGRAMMER
• 4 Seven Segment Mulitplexed Display, USBasp Programmer support interface
• 4x4 Matrix Key Pad, 4 Seven Segment Mulitplexed Display, RTC , ADC, ULN2003 & AT24C32 INTERFACE
• RS232 for Serial Communication
• LED ARRAY

• AVR Development Board for ATMEGA16/ATMEGA32 (40 pin) microcontrollers
• 4 Seven Segment Mulitplexed Display,
• 4x4 Matrix Key Pad, 4 Seven Segment Mulitplexed Display, RTC , ADC, ULN2003 & AT24C32 INTERFACE
• RS232 for Serial Communication, LED ARRAY
• Note: Component Colors varies as per availability.

• Robosoft Labs PIC 40PIN Development Board with MAX232 , RTC , AT24C32, ULN2003 IC's
• 4 Seven Segment Mulitplexed Display, PICKIT2 & PICKIT3 Programmer support interface
• 4x4 Matrix Key Pad, 4 Seven Segment Mulitplexed Display, RTC , ADC, ULN2003 & AT24C32 INTERFACE
• RS232 for Serial Communication, LED ARRAY
• Note: Relay and Component Colors varies as per availability.

• Robosoft Labs AVR (ATMEGA 16 / ATMEGA32) DEVELOPMENT BOARD With MAX232 and ATMEGA32 IC
• DIL40 microcontroller socket Quartz crystall 8Mhz 1 LED in PA.0 Reset button
• Power plug-in jack Extension slot on every uC pin GND bus Vcc bus. Four mounting holes 3,3 mm (0,13\")
• RS232 for Serial Communication, Supports USBasp PROGRAMMER INTERFACE
• JTAG interface ISP programming Interface Built in serial Port Built in Max232 (RS232 to TTL Converter)

• Robosoft Labs AVR ATMEGA16/32 40PIN Development Board with MAX232 IC
• DIL40 microcontroller socket Quartz crystall 8Mhz 1 LED in PA.0 Reset button
• Power plug-in jack Extension slot on every uC pin GND bus Vcc bus. Four mounting holes 3,3 mm (0,13\")
• RS232 for Serial Communication, Supports USBasp PROGRAMMER INTERFACE
• JTAG interface ISP programming Interface Built in serial Port Built in Max232 (RS232 to TTL Converter)

• Robosoft Labs AVR 40PIN Development Board with ATMEGA32 , MAX232 , RTC , AT24C32, ULN2003 IC'S
• 4 Seven Segment Mulitplexed Display, USBasp Programmer support interface
• 4x4 Matrix Key Pad, 4 Seven Segment Mulitplexed Display, RTC , ADC, ULN2003 & AT24C32 INTERFACE
• RS232 for Serial Communication
• LED ARRAY

• Robosoft Labs AVR ATMEGA16/32 40PIN Board with ATMEGA32 , MAX232, RTC, AT24C32, ULN IC, LCD & PROGRAMMER
• 4 Seven Segment Mulitplexed Display, USBasp Programmer support interface
• 4x4 Matrix Key Pad, 4 Seven Segment Mulitplexed Display, RTC , ADC, ULN2003 & AT24C32 INTERFACE
• RS232 for Serial Communication
• LED ARRAY

• Robosoft Labs 8051 / 8052 40 PIN Development Board with MAX232 , RTC , AT24C32 , ULN2003 IC's
• 4 Seven Segment Mulitplexed Display, RTC , ADC, ULN2003 & AT24C32 INTERFACE
• 4x4 Matrix Key Pad, MAX232, RTC , AT24C32 , ULN2003 IC's
• RS232 for Serial Communication
• LED ARRAY , ONBOARD POWER SUPPLY

• 8051 / 8052 Development Board with AT89S52 MICROCONTROLLER, MAX232, RTC , AT24C32 , ULN2003 IC's
• 4 Seven Segment Mulitplexed Display, RTC , ADC, ULN2003 & AT24C32 INTERFACE
• 4x4 Matrix Key Pad
• RS232 for Serial Communication
• LED ARRAY , ONBOARD POWER SUPPLY

Popular categories on Home & Kitchen