Drive & Transmission By Soran

• Double bearing housing can provide excellent radial support for the passing shaft.
• The outer countersunk hole can place the screw head below the surface. The countersunk hole can avoid the interference of the screw head, so it will not interfere with the rotating parts (wheel hub, collar, connector, etc.) to ensure the flatness of the installation plane.
• You can press two bearings into a single mount, which allows perfect concentricity between the two bearings, allowing the shaft to rotate with minimal friction or radial clearance.
• Scope of application, double bearing housing is suitable for intelligent mechanical robots as coupling drive accessories.
• The outer diameter is 32mm (can be fixed by the clamping place) and the 16mm hole pattern has four M4 threaded holes and four 4mm diameter through holes respectively, making the installation options very rich.
• Warranty not applicable for this product

• As an compressors accessory, piston ring can be applied to oil free cylinders, pumps, compressors, etc
• The piston ring is made of faux leather material, which can withstand high temperature and fatigue
• Lightweight and practical, can meet the daily replacement needs, and the quality is guaranteed, so you can use it with confidence
• The piston ring maintains the ability to resist impact, has low noise, and is convenient to use in real life
• Not easy to wear the contact objects, and the service life of the piston ring of the pump is long
• Warranty not applicable for this product

• The kit contains parts such as cylinder, piston, piston rings and pin, with strong practicability, easy to use and replace.
• Cylinder diameter is 56mm, with standard size, suitable for K960 K970 544935603 cutting saw.
• The one piece design helps increase the strength of the body and has a good thermal fit to the piston.
• Has abrasion resistance, corrosion resistance and high temperature impact resistance, which can replace old ones well.
• The cylinder kit is made of high silicon aluminum alloy, with strong thermal diffusion capacity and high thermal conductivity.
• Warranty not applicable for this product

• Come with strong thermal diffusion ability, because of using lightweight high silicon aluminum alloy
• The wear resistance, corrosion resistance and high temperature impact resistance of the product has been improved greatly
• Possess a good thermal fit to the piston and reduces the weight of the whole machine, the thermal conductivity is increased by 42% compared with the bimetal structure, improved a lot
• Provide surging power, strong gas compression ability, clear thread and smooth knob, not easy to jam
• Made of one piece forming, increase the strength of the machine body and improve the surface hardness, more sturdy and durable
• Warranty not applicable for this product

• The product is a silent oil free air compressor accessories pump head 1600W cylinder liner
• The height of air compressor cylinder sleeve is 35 and 35.5mm, two models are available
• Because very convenient to disassemble and install, as a common accessory of air compressor
• Main purpose of cylinder sleeve repair is to eliminate errors and restore the matching clearance between the cylinder liner and the piston
• Manufactured by cast iron technology, standard production method, cylinder sleeve has a long service life
• Warranty not applicable for this product

• Mute oil free air compressors accessories cylinder liner, suitable for pump head 1500W cylinder.
• Size, cast iron cylinder liner has an inner diameter of 70mm / 2.8in, an outer diameter of 75mm / 3.0in , and a height of 47.5mm / 1.9in .
• If you encounter any problems during use or do not understand how to install, please contact us in time, we will try our best to solve the problem for you.
• Excellent performance, this cylinder sleeve has sufficient strength and rigidity, good wear resistance and sealing performance.
• Made of cast iron, the cylinder liner is durable, easy to disassemble and install, commonly used accessories for air compressors.
• Warranty not applicable for this product

• Made of light weight high silicon aluminum alloy, have strong thermal diffusion ability, have a thermal conductivity of 42%, higher than that of bimetallic structure.
• Small size and light weight, reduce work difficulty, easy and convenient to use and operate.
• One piece molding, increase the strength of the machine body, improve the surface hardness.
• With the function of wear resistance, corrosion resistance and high temperature impact resistance.
• Have good thermal fit to the piston and reduce the weight of the whole machine.
• Warranty not applicable for this product

• Simple design, light and compact, easy to carry and use, convenient and practical.
• Reasonable design, easy to install and disassemble, can replace the old or damaged drive shafts.
• Good spare parts for remote control car, fit for Maxx 1/10 RC Cars.
• Strict quality control and quality assurance, high safety factor, can be used with peace of mind.
• Machined CNC hardened carbon steel is strong, corrosion resistant and durable.

• Simple design, light and compact, easy to carry and use, convenient and practical.
• Reasonable design, easy to install and disassemble, can replace the old or damaged drive shafts.
• Good spare parts for remote control car, fit for Maxx 1/10 RC Cars.
• Strict quality control and quality assurance, high safety factor, can be used with peace of mind.
• Machined CNC hardened carbon steel is strong, corrosion resistant and durable.
• Warranty not applicable for this product

• Use sophisticated production technology, have higher strength and rust resistance, and can well replace old or damaged accessories.
• With reasonable design, can perfectly match the model car and improve the work efficiency of the RC car.
• These wheel hubs and rear axle can withstand high temperature, strong wind and sunlight without affecting normal visual effects.
• Small in size, light in weight, easy to carry, can be carried around, simple to operate and convenient to use.
• Made of high quality aluminum alloy materials, these wheel hubs and rear axle are sturdy, durable, wear resistant and have a long service life.
• Warranty not applicable for this product

Popular Categories on BuyBestBrands.in