Automotive - Car Accessories - Instruments

• Application: Ford Escape 150 MPH Speedometer (2014-2016); Ford Focus 150 MPH Speedometer (2013-2016)
• Installation is very easy. Use your original ribbon cable, no soldering required, needle pointer removal is also not required. Simply remove the cluster then remove the front lens and rear panel. The new speedometer screen will easily pop out without disturbing the gauge needles.
• Note: Before you order, please verify that your gauge face reads up to ?140? or ?150? MPH. There are two different Ford Focus and Escape screen. 140 MPH seems to be most common. If you have the 140 MPH scale, type in this ASIN number B08CSQM4CD into search bar. Select the display that matches yours.
• 2013 Escape may have either screen. Please verify the screen first. It either has brackets on the left and right side of the screen or it does not. In this case the safest bet is to buy 140 MPH screen .
• Brand New, OEM Number: LQ042T5DZ11

• HOUR METER&TACHOMETER----It is a multifunctional device which include Hour Meter function(Total Hours-TOT ,JOB Timers-JOB&JOB1,10 groups of Service Timers-SVC),Tachometer function(Real-time RPM,MAX RPM,RPM Alert,Programmable Firing Patterns),help you to keep the engine or equipment healthy.
• TOTAL HOURS(TOT)----Help to track how many hours are the engine working,TOT value can not be reset with 0.1/1 hour accuracy;you can set an initial time value to continue the timing,once replace an old hour meter.TOTAL HOURS(TOT)----Help to track how many hours are the engine working,TOT value can not be reset with 0.1/1 hour accuracy;you can set an initial time value to continue the timing,once replace an old hour meter.
• MAINTENANCE TIMERS----JOB timers(JOB&JOB1) are used to measure the time of a particular work job,it is resettable; There are 10 groups of countdown service timers for different using request: Change engine oil,Clean air filter,Change air filter,Change fuel filter,Clean spark plug discharger,Change spark plug,Check valve,Clean fuel tank,Check Fuel Line,Check idie SPD;When each maintenance timers arrived, the red backlight will be flashed with the maintenance status.
• TACHOMETER----Record the real-time RPM value when engine is on with progress bars, help to adjust engine idle;Different engine firing patterns can be programmed,which can be improved RPM value more accurate;Viewable Maximum RPM value;RPM refresh rate 0.5/1S.
• OTHER - 24 Hours Clock;Working Times Recording;Backlights Mode Selection;Display shutdown;Low Battery Reminder;Battery Replacement(1PC of CR2450 included);Data Storage;Waterproof rate: IP67;CE RoHs certifications;2 years warranty.

• ?High Quality Material-Each gauge pod is crafted from high quality ABS plastic that allows it to withstand cracking, fading, and warping.Universal 52mm 2 Inch Meter Gauge Pillar Mount Pod Holder allows to mount the gauges at eye level to make them can be easily viewed.
• ?Easy Installation-------The prominent advantage of Universal Single Hole Meter Gauge Holder is easy and simple installation ,helping you save a lot of complicated processes and saving you time and effort.For installation issues you can contact us at any time inline,we will reply you within 24 hours.
• ?Fine Workmanship------Gauge Meter Mount Pod Holder Black Cover for Car Auto can hold varieties of 52mm or 2 inch gauges, like exhaust gas temp gauge, turbo boost gauge, voltage gauge, tachometer gauge and so on.
• ?Widely Application------52mm Single Hole Dash Dashboard Gauge Meter Mount Pod Holder is suitable for most of auto, truck, boat, motorcycle and other vehicles.There are three different types for your option, practical and high reliability.
• ?Standard SpecificationGauge Bracket Holder Conform to strict quality control standards, dependable to use.Gauge Mount Pod Manufactured according to the original specifications.Built to meet standard specification, strictly follow factory quality control.

• 1. LONG ZINC ALLOY DUAL HEAD DESIGN : Straight foot air chuck are deisghed for inner wheels or difficult reached valve as well as the 30reverse chuck are for outer wheels.A good choice for testing your tire pressure
• 2.ACCURATELY MEASURE THE TIRE PRESSURE:Two-side ABS bar calibrated:10-150 psi / 1-10kg/cm2; 2 psi increment,Easy read printed clear scale .Perfect for truck, car, suv, rv, atv, bike or motorcycle with schrader valve
• 3.HEAVY DUTY WELL BULIT STRUCTURE:Zinc alloy chuck with solid brass core, chrome -plated steel body with a handing ring for easy storage.No battery needed, suitable for any severe environment
• 4.HOW TO USE: Push the chuck on the tire valve to get the air out of the tire, the scale bar will slip out and then you can get the pressure reading.Once finished the adjustment of the tire pressure, don't forget to screw on the valve caps
• 5.SATISFACTION GUARANTEED:1 Year Warranty, whatever problems you meet with our deflators, please contact us for the solution
• Warranty not applicable for this product

• MULTI- FUNCTIONALITY - A smart GPS multi-functional HUD speedometer for driving, fully supports high-precision monitoring of car speed, vehicle tilt angle, vehicle pitch angle changes, compass, time and car battery voltage status, to ensure your driving safety.
• HD LCD DISPLAY ? LIGHT SENSOR - It adopts color HD LCD display with high resolution. Adjust the brightness of the screen by using the sensitivity of the light sensor which will improve visibility greatly. Free rotation, which is more sensitive. After connected to power supply, there will be backlight inside, which will help you see accurately in case of night or dark situation.
• GPS MODULE - Equipped with high- precision satellite GPS signal module. Automatically monitor vehicle driving conditions. Widely applicable to asian cars, american cars, european cars.
• SLEEP MODE - After the vehicle starts the speedometer starts automatically after car parking the meter will be in sleep mode automatically.
• PRODUCT INTRODUCTION - AUTOOL X95 is a multifunctional instrument with in-built multi-axis gyroscope and GPS system, which can measure the slope and inclination, the degree of downhill and uphill of off-road vehicles. It also provides vehicle speed, altitude and vehicle driving direction, and has high-precision satellite real-time clock function.

• ?No external power required-Timed by sensing the vibration intensity and amplitude of the machine; The hour meter contains a battery inside,
• ?Accumulates total running hours (tot)-When equipment vibrates, the display shows the total run time of the machine and remains visible. Help you track how many hours you put on your machine. Contains hour meter, resettable job timer, TOT hours are non-resettable; 0.1-hour accuracy
• ?VIBRATION SENSITIVITY- Programmable vibration sensitivity (low Medium and high), Used to accurately sense the vibration frequency of different machines during operation. Hour meter contains lock function to prevent time usage during transport.Power saving mode to conserve battery life with auto sleep time;
• ?Easy To Install-Mounted in a place where the machine is strongly vibrating; Double-sided tape on the back for mounting on the surface along with two side holes for fastening?
• ?Risk-Free Guarantee- NKTECH hour meter made of high-quality materials 2 Years warranty? We provide 24-hour online customer service about NKTECH hour meter, please dont hesitate to contact us if you have any questions or suggestions and we will reach you at the soonest.

• Brand New Edge Insight CTS3 Digital Gauge, Compatible with 1996 & Up OBD-II Vehicles, Produced by Holley Performance Products (Holley Part #84130-3)
• Upgrade from bulky gauges with this multi-gauge, touch-screen data logger to track important vehicle parameters including EGT, regen cycles, trans temp, boost, RPM, etc. This Insight CTS3 Digital Gauge Monitor by Edge is compatible with most domestic 1996 and newer (OBDII) gas and diesel vehicles, and the full-color 5-inch capacitive touchscreen provides crystal-clear readouts with auto-dimming for night-time use.
• The Insight is the #1 preferred digital gauge monitor in the market today, used by daily drivers and enthusiasts everywhere. The Insight is the most comprehensive, state-of-the-art, multi-gauge touch-screen display on the market. It is an instantaneous and inexpensive alternative to bulky, analog gauges that would otherwise cost hundreds of dollars and take hours to install.
• This is the perfect tool for those who want to monitor their vehicle performance and prefer not to program their vehicle, or for those who already have significant performance upgrades and want to safely monitor their vehicle performance. Not only can the Insight monitor vehicle performance, but it can also be intelligently configured to provide audible and visual alerts to help you protect your vehicle.
• NOTE: Compatibility with 1998-2005 Dodge/Ram has not been released yet.

• Brand New Holley EFI Pro Dash Touch Screen Digital Dashboard with High Resolution 6.86\" Screen (Holley Part #553-112)
• The 6.86\" Pro Dash is completely customizable for use in a variety of motorsports applications. It features a 6.86\" 1280x480 resolution low glare, high brightness, high contrast, full color capacitive touch screen for easy viewing even in sun, plug & play connection to all Holley EFI systems & a weather resistant aluminum housing featuring flexible mounting options.
• Input/Outputs for expanded functionality. 34 Pin connector has 13 multi-configurable inputs for most Holley EFI sensors like pressure & temperature. Inputs are configurable, allowing utilization of different sensor scaling calibrations. 2 dedicated speed inputs for RPM, Driveshaft speed, or any other Hall effect speed input. 4 ground switched outputs that can be utilized with the switch panel feature to quickly turn on any of your auxiliary accessories (master nitrous switch/electric water pump)
• Specs: Brand: Holley EFI | Depth: 1.25\" | Emission Code: 5 | Height: 3.4375\" | Product Type: Digital Dashes | Screen Size: 6.86\" | Screen Type: Capacitive Touch Screen | Width: 7.5625\"
• NOTE: This device will only display and/or communicate with Holley EFI HP/Dominator ECUs with V4 build 110 or later firmware. It will also communicate with Terminator X / Terminator X Max and Sniper ECUs.

• Speedometer Head Replacement for Toyota COROLLA SEDAN
• OE number: 84310-33130
• Please carefully verify your year & make & model in the product description or check your parts pictures & parts No. with ours before purchasing, so as to prevent buying wrong and unnecessary expenses. If your not sure or don't know, please contact us
• High quality replacement and fits perfectly
• Made in Taiwan

• Dimensions: - 85mm diameter (3-3/8\"); - 55mm Depth (2-3/4\")
• Three unit can be swicthed: knot; mph; km/h
• GPS SOG: Speed Over Ground: 0-600km/h
• ODO: odometer: 0-999999km (can be adjusted by the back button.); TRIP: 0-999.9km (Return Zero When off electricity.); COG: Course Over Ground (Orientation Pointer)
• Operating voltage:9-32V ; Degree of Protection: IP67; Backlight: TFT Screen

Buy Automotives from the world of Automotives at buybestbrands.in

Buy Car Accessories online at buybestbrands.in

Take advantage of other benefits at buybestbrands.in

Popular Categories on BuyBestBrands.in