Steering & suspension By Fabater

• Strict Manufacturing: With high safety factor, strict quality control and quality assurance, can be used reliable.
• Fitment: Tie rod end set is replacement for Precedent Club Car 2004 UP, and replacement for Tempo club car 2018 UP.
• Long Lifespan: Exquisite and careful workmanship, can be used for a long time, saving your cost.
• High Quality Metal: Made of high quality metal, wear resistant, corrosion resistant, durable and have a long service life.
• Part Number: Replacing club car OEM numbers for reference, 1020226 01, 1022883 01, 102022601, 102288301, no adaptation issue.
• Warranty not applicable for this product

• Quality Material: Made of high quality metal alloy material, high temperature resistant, in line with strict original requirements.
• Fitment: Replacement for SPORTSMAN 500 1998 2000, 2004, replacement for SPORTSMAN 500 RSE HO 2001. Campatible with left or right side.
• Easy Operation: These rods are built to meet OEM specifications for direct installation and easy to operate.
• Good Replacement: Because of the original standard, can be directly replaced broken or broken tie rod set.
• High Reliability: Tie rod set has gone through vehicle try on testing, making it safe and reliable to use.

• Antislip Design: The clamp kit has nonslip teeth and rubber pads to ensure a firm installation and will not leave scratches on the surface of the hood.
• High Compatibility: Mounting bracket can be used to install work lights, fog lights, driving lights, etc. of different thicknesses. The thickness of the clamp board on the vehicle is limited to a maximum of 8mm/0.31in.
• Durable Material: Made of sturdy 304 stainless steel, which can protect itself well and prevent rust in bad weather.
• Free Adjustment: You can freely adjust up and down 180, left and right 60 to ensure that your light is in the correct lighting direction and perfect lighting angle.
• No Drilling: No need to drill, just clamp the hood LED light bar mounting kit and tighten it, easy to operate.
• Warranty not applicable for this product

• Fitment: Replacement for FOURTRAX 250X TRX250X 1987 1988, replacement for FOURTRAX 250X TRX250X 1991 1992. Campatible with left or right side.
• Premium Material: Made of high grade metal alloy material that is resistant to high temperature and meets strict original requirements.
• Easy to Operate: These tie rod are manufactured in accordance with OE specifications, directly installed, and simple to operate.
• Excellent Replacement: Due to the original standard, can directly replace the broken or shabby tie rod set.
• High Reliability: ATV parts have went through vehicle try on testing, which is quite reliable and safe to use.

• Premium Material: Made of high grade metal alloy material that is resistant to high temperature and meets strict original requirements.
• High Reliability: ATV parts have went through vehicle try on testing, which is quite reliable and safe to use.
• Excellent Replacement: Due to the original standard, can directly replace the broken or shabby tie rod set.
• Fitment: Replacement for FOURTRAX 250X TRX250X 1987 1988, replacement for FOURTRAX 250X TRX250X 1991 1992. Campatible with left or right side.
• Easy to Operate: These tie rod are manufactured in accordance with OE specifications, directly installed, and simple to operate.
• Warranty not applicable for this product

• Simple Installation: Simple to install, the surface ensures a tightly and easily mounting.
• High Reliability: Manufactured to meet standard specification, strictly follow factory quality control.
• Purpose: Used to provide cushioning to protect the control arm, strong practicality.
• Fitment: Practical A Arm bushing kit, perfect replacement for RZR 800 800 S 800 4.
• Premium Material: High quality ABS and metal material, sturdy, wear resistant and durable.
• Warranty not applicable for this product

• Strong Compatibility: Good spare parts for remote control car, fit for MN86 series RC cars.
• Durable Material: Made of aluminum alloy material, strong and durable, can be used for a long time.
• Improve Performance: It helps to improve the overall performance of the remote control car and has strong flexibility.
• Stable and Reliable: Easy to install, reliable quality, guarantee stability and excellent performance.
• Compact Shape: Small size, light weight, will not cause additional burden to the car, easy to use.

• With Storage Box: Equipped with a storage box with a lock, can protect these blade fuses, and is easy to transport and store.
• Easy Identification: The transparent appearance can quickly check the condition of the fuse, and the color coding and engraved Amp rating help to easily identify the fuse model.
• Main Purpose: The blade fuse can quickly and accurately blow the current, protect the car and electrical equipment from short circuit and overload.
• Multiple Types: The kit includes a variety of car blade fuses in the range of 5 40A, which can meet more car maintenance needs.
• Aluminum Alloy: These blade fuse inserts are made of excellent aluminum alloy material, which has good electrical conductivity and corrosion resistance.

• Easy to Install and Disassemble: The old or damaged shock absorber parts can be directly replaced.
• Shock Absorption: High elasticity of the spring ensures the damping effect and improves the stability of the RC car.
• Applicable Models: Suitable for ZD Racing, for HSP, for Redcat, for Hongnor, for HPI, for Hobao, for Traxxas. Suitable for Truggy Truck 1/10 series.
• Excellent Eorkmanship: RC car that is very suitable for you and enhances the performance of your car.
• High Strength: Made of aluminum alloy material, rust proof, wear resistant, and durable.

• Good Replacement: Because of the original standard, can be directly replaced broken or broken tie rod set.
• Fitment: Replacement for SPORTSMAN 500 1998 2000, 2004, replacement for SPORTSMAN 500 RSE HO 2001. Campatible with left or right side.
• High Reliability: Tie rod set has gone through vehicle try on testing, making it safe and reliable to use.
• Quality Material: Made of high quality metal alloy material, high temperature resistant, in line with strict original requirements.
• Easy Operation: These rods are built to meet OEM specifications for direct installation and easy to operate.
• Warranty not applicable for this product

• Perfect Fit: Designed and manufactured with tolerances, resulting in a seamless fit between the dash and the kit.
• Applicable Model: Center console navigation panel frame, replacement for X1 E83 2010 2014, come with wire harness and protocol box, specially made for this model.
• Convenient Installation: Precise reservation hole, easy to Install and uninstall without any modification or complicated operations to save your time.
• Scratch Avoidance: Effectively dustproof, and can cover the existing unsightly scratches in the central control area, bring a new look.
• Premium Materials: The radio face plate is machined from quality ABS with high strength, not easy to deform, make your car interior more charming.
• Warranty not applicable for this product

• Aluminum Alloy: These blade fuse inserts are made of excellent aluminum alloy material, which has good electrical conductivity and corrosion resistance.
• With Storage Box: Equipped with a storage box with a lock, can protect these blade fuses, and is easy to transport and store.
• Main Purpose: The blade fuse can quickly and accurately blow the current, protect the car and electrical equipment from short circuit and overload.
• Multiple Types: The kit includes a variety of car blade fuses in the range of 5 40A, which can meet more car maintenance needs.
• Easy Identification: The transparent appearance can quickly check the condition of the fuse, and the color coding and engraved Amp rating help to easily identify the fuse model.
• Warranty not applicable for this product

• [Perfect Replacement] Perfect replacement of the original plastic parts, perfectly match, they will give your remote control car a new appearance.
• [Application] This pair of rear lower suspension arms are specially designed, which are suitable for HBX 16889 1/16 remote control car .
• [Easy Operation] Easy to install and disassemble, the suspension arms with high hardness, light weight, will not bring burden to the car.
• [Aluminum Alloy Material] Made of high quality aluminum alloy, this pair of metal rear lower arms are durable and have a long service life.
• [Introduction] This is a pair of rear lower suspension arms which are used for remote control car replacement parts, come with screws abd plugs.
• Warranty not applicable for this product

• Non Slip: Even if the hands sweat, the installation will not slip, and the face also presents a delicate metal texture
• Replace Parts: Precise thread, firm connection and not easy to fall off. Great DIY bike replacement parts
• Easy Install: Suitable for the front fork with an outer diameter of 28.6mm at the upper end. It can automatically locate the installation depth and keep it centered. It needs to be used with a rubber hammer
• Polishing Design: The sleeve face is sand blasted and anti skid. After forming, polish and polish the face. Three dimensional sand blasting
• High Exactness: High exactness processing and molding, more accurate coring, no deviation in the center, and automatic depth positioning
• Warranty not applicable for this product

• Stable and Reliable: Easy to install, reliable quality, guarantee stability and excellent performance.
• Improve Performance: It helps to improve the overall performance of the remote control car and has strong flexibility.
• Strong Compatibility: Good spare parts for remote control car, fit for MN86 series RC cars.
• Compact Shape: Small size, light weight, will not cause additional burden to the car, easy to use.
• Durable Material: Made of aluminum alloy material, strong and durable, can be used for a long time.
• Warranty not applicable for this product

• Great Fitment: The tie rod is an ideal replacement for GRIZZLY 660 YFM660 2002 2008, compatible with left or right side.
• Premium Material: Machined from quality metal alloy material with high strength and withstand high temperatures, not easy to break.
• High Durability: The ATV parts have gone through vehicle try on testing, which means it is quite reliable and safe to use.
• Convenient Installation: The tie rod set are manufactured to OE specifications and are mounted directly for simple operation.
• Excellent Match: Highly conforms to the original factory standard, you can directly replace damaged or worn out one.

Popular Categories on BuyBestBrands.in