Electronics Store - Cameras - Camera Accessories - Batteries

• Travel kit for use with Panasonic Consumer Camcorders WXF991, VX981, VX870, V770, W580, V380, V180
• VW-BC10 Battery Charger with AC Cord
• Battery, 3.6V, 1940mAh(min.), 7.0Wh (Uses Battery Charger VW-BC10)

• [Widely used] Intelligent automatic recognition of 12/24V battery, quick charging, 12V 25Amp, 24V 13Amp ultra-high power, deep cycle battery charging, does not damage the battery. Lithium, LifePO4, Lead acid AGM,GEL,EFB, MF, Flooded battery, VRLA, SLA, wet battery..Suitable for cars, trucks, motorcycles, SUVs, golf carts, agricultural vehicles, motorboats and so on. Max: Lithium :12.4V-14.6 / 24.8V-29.2V. Lead acid :14.7V / 29.4V. LifePO4:14.6V / 29.2V
• [Protection and Maintenance] 9level fast intelligent charger, temperature compensation, cooling system, over current, over voltage, short circuit and reverse connection protection, no spark, refractory material, 13 ft cable, multiple protection, safe and reliable. Input voltage :100-240V 50/60Hz, output voltage/current :12 V25A, 24 V13A. Minimum starting voltage :2V. 3 level regulating current, prolong battery life. It can'tactivate a depleted battery?
• [Automatic charging] Automatic detection and identification of 12V and 24V batteries without manual selection. The CPU monitors the charging process intelligently. When fully charged, it automatically enters trickle charging, detects sulfate layer and acid layer, and adopts the latest pulse repair function to restore lost battery performance and extend battery life. You can select charging current?When the battery is low, the maximum charging current can reach 25amps
• [Safe Charging] Intelligent charger, large LCD display of charging and battery status; Charge voltage and current, internal temperature, charge percentage, summer, winter mode, etc. The operation procedure is simple, just plug in the power, select the charging current, and charge the battery intelligently. Battery charger, battery maintenance, trickle charger, battery desulfurization in one battery solution. Essential tools for your home. Let you charge more secure.
• [strong quality and service] we are a professional charger brand. We have quality products and after-sales service. We offer permanent after - sale service for this product. Thank you for your support, if you have any questions, please feel free to contact us! What You Get Smart charger, 3M power cord, cable clip, manual, 2 junction boxes

• The Newell VLB-290W TESLA battery pack is additionally equipped with USB, D-tap and DC ports
• This allows you to use the stored power for many applications.
• The built-in intelligent protection system, based on IC electronics, regulates the charging process.
• The LED indicator shows the current charging level.
• The Newell replacement has been built using lithium-ion technology.

• Vehicle Fitment Compatible with Chrysler LeBaron 1978-1981, Town & Country 1978-1981; Compatible with Aspen 1976-1980, Challenger 1970-1972, Charger 1968-1974 1976, Lancer 1961-1962, Ramcharger 1974-1980; Compatible with Plymouth Custom 1960-1961, PB150 1981-1983, Satellite 1965-1974, Suburban 1960-1961
• Reference Number 594243, 102210, 4095527, DA2250, P-D225A, PB1001N, PC-4007, 2269076, 2806211, 4071060, 4071061, 4095220, 4095525, 4095527
• Specification Drive Belt Type: Serpentine; Mounting Hole Quantity: 1; Bolt and Washer Included; No
• Directly Fit Quick and easy installation; Durable, high reliability and optimal operation
• Buy with Confidence 1 Year Unlimited-mileage Quality Guarantee---We extremely value your satisfaction and strive to provide you good shopping experience. Any further question, please feel free to contact us at any time.

• Aluminum Alloy Material: Nitze N21-D6 v mount battery plate is made of aluminum alloy which is sturdy and durable
• DC&D-tap Ports: The v mount plate provides one 8V/3A DC jack and two 14.8V/3A D-tap sockets
• USB-C Port: The USB-C ports of the mini v mount plate supports 5V/2.4A,9V/3A,12V/2A(PD3.0/QC3.0/FCP) output
• Accessories Match: The v mount battery plate can be connected with E2-FS-V series v mount adapter by two 1/4 screws
• Note: Please pay attention to use the same adapter cable as the v mount plate interface voltage to avoid short circuit

• Battery Type: Ni-MH, Voltage: 14.4V, Capacity: 3500mAh, 100% compatible with originals charger.
• Repalcement for Makita 14.4V battery 1434 1420 1422 1433 PA14 1435 1435F 192600-1 193985-8 192699 193157-5 193158-3 1051D 4033D 8433D 6228D.
• Chrager Input: AC100-240V, Output: 1.2-18V/1.5A,usually charge the battery to full in 1.5 - 3 hours according to the capacity.
• 14.4V replacement battery are FCC, CE and RoHS certified, no pollution, no memory effect, low self-discharge for maximum productivity and less downtime.
• Warranty: we provide 30 days money back, 7*24 hours friendly customer service support.

• V-Mount Battery Plate - 15mm LWS Rod Adapter
• Color: Tilta Gray Finish
• Material: Aluminum-Alloy, Stainless Steel, ABS Plastic
• Weight: 0.741 lb (336g)

• Compatible with professional cameras to use V mount BP battery external power supply; with USB interface
• Low static power comsumption; low temperature coefficient; high conversion efficiency
• Over output protection circuit; automatic lock protection
• 15mm Deluxe rod clamp to mount the battery splitter on DSLR 15mm rods rig system
• Splitter power output interface: 12V; 7.2V; 5V(USB); 14.8V D-Tap

• SmallRig V mount battery adapter plate 3204 is designed to provide longer battery life for your camera equipment through V-mount batteries. It utilizing the standard V-port structure so that it suitable for most V mount batteries in the market. It is suitable for Sony for Canon and other DSLR cameras

• Power Adapter Cable for Sony A7III A7RIII A7SIII A9 ILCE-9 FX3 A7C A7IV Camera.
• Work with Sony battery and v-mount battery with D-tap output.
• Cable Length?Min length is 30cm, Max length is 90cm.
• Input:10V-20V; Output: 7.6V/2A.
• Plug A: NP-FZ100 Dummy Battery; Plug B: D-tap.

• Smart and wide applications power output systems.With the help of the battery plate Power up monitors, DSLR cameras, mobile phone, led lights, on camera flash, etc.
• Compatibility:Including but not limited to Canon 5D2, 5D3, 5D4, 6D, 6D2, 7D, 7D2, 70D, 80D, 5DSR,5D MarkII, 5D markII ,5D Mark IV and BMPCC 4K/6K etc.
• The V lock battery plate features a 15V DC barrel output, an 8V DC barrel output, a 12V DC barrel outputs, a 5V DC barrel outputs, a D-Tap output and two USB port. A power switch is provided on the side to turn everything on or off.
• 15mm Rod clamp which suit for 15mm rod pass through on DSLR rigs and gimbals. V-Lock Mount which access the quick release the battery attachments.
• Package Include:1 x KOCACKOO V-Lock Plates. 1 x LP-E6 Dummy Battery Adapter. 1 x 5.5 * 2.5mm DC to DC Spring Cable. 3 x DC Cable. 1x Storage bag.

• Smart and wide applications power output systems.With the help of the battery plate Power up monitors, DSLR cameras,camcorders, mobile phone, led lights, on camera flash, etc.
• ROD CLAMP:With super clamp mounting BP battery to light stand, tripod or support rod for DSLR Camera, Camcorder, Monitor, led video light, microphone, etc.The super clamp is fit for 1.66\" and less than 1.66\" rod pass through on rigs and gimbals. V-Lock Mount which access the quick release the battery attachments.
• The V lock battery plate features a 15V DC barrel output, an 8V DC barrel output, a 12V DC barrel outputs, a D-Tap output and USB port. A power switch is provided on the side to turn everything on or off.
• Using D-tap/DC/USB to dummy battery adapter cables (Not included) works for Canon 5D2, 5D3, 5D4, 6D, 6D2, 7D, 7D2, 70D, 80D, 5DSR,5D MarkII, 5D markII ,5D Mark IV and BMPCC 4K/6K ,Sony a7, 7R, a7S, a7 II, a7S II, a7R II,a6500, a6300, a5100, a5000, a3000,NEX-5, NEX-7, DSC-RX10 etc.
• Package Include:1 x KOERTACOO V Mount Plate with Super Clamp. 1 x 5.5 * 2.5mm DC to DC Spring Cable. 3 x DC Cable. 1x Storage bag.

• Various Interfaces This V mount battery comes with USB-C, USB-A, DC 5.5*2.1mm 8V, DC 5.5*2.5mm 12V, BP and D-TAP ports, which are more versatile and support simultaneous power multiple devices, such as DSLR camera, camcorder, monitor, smartphone, wireless video transmitter, tablet and laptop, etc. It also has a 1/4\"-20 and 3/8\"-16 threaded hole on the V-fastener, can be held with a ball head or other clamp
• Bi-directional PD Fast Charging - The BMS smart chip built-in SmallRig V-lock VB99 battery supports multi-protocol fast charging (such as PD / QC / SCP / PPS / APPLE-2.4A etc.), supports high-power PD bi-directional USB-C fast charging up to 65W, making your charging faster
• Sufficient V Mount Battery - SmallRig 3580 V-mount battery with 6700mAh high capacity (99Wh/14.8V), built-in premium lithium battery to offer powerful battery life for long video and photography projects, good power backup solution for photographers and filmmakers. Except for this 99Wh battery, SmallRig also has VB50 50Wh V 3579(B0B6YYCFBK) mount battery, which would be a good choice if you need smaller capacity
• Mini & Portable V Mount Battery - Palm size, only 4.2 x 2.8 x 2.1 inches, only 1.2 pounds, about 30% smaller than traditional V-mount batteries, feel free to carry outside and travel. And you can also track the working status of the battery at all times through its OLED display
• Note: 1. When charging R5, R5C, R6, R7, if there is no connection, please turn off the camera and disconnect all cables, disconnect and reconnect the camera battery and then charge it again. 2. When USB-A and USB-C are discharged at the same time, the battery output is 5V/3A, when USB-C charging and USB-A discharge, the battery output is 5V/3A; 3. The power button is only used to wake up the screen and check the battery status, can't cut off the battery

• Two charging channels and safety, Newell charger has two channels, so that the batteries will charge faster.
• Advanced MCU controllers regulate the parameters of the charging process.
• Protecting against overheating and overloading, ensure maximum life of cells.
• power function from a device using the battery can be directly powered camera with built-in XLR output (pin 4).
• The set included cable is necessary.

Popular Categories on BuyBestBrands.in