Electronics Store - Cameras - Camera Accessories - Batteries

• This 12V 3A AC-DC power adapter is suitable for Power Atomos monitor, Lectrosonics venue VR IFB power cable, Pix-E Pix-E5 Pix-E5H Pix-E7 Monitor video devices or any other equipment with DC 2.1 thread needle connector.
• AC wide voltage input, Input: AC100-240V-50 / 60Hz.
• Output: DC 12V 3A 36W.
• Connector: DC self-locking right angle 5.5 mm x 2.1 mm. Cable length: about 80 inches/2 m (any other length you need, you can contact us).
• This is an American plug. If you want UK plug or EU plug, please leave a message after your purchase.

• Note: No indicator when charging; But you'll notice that the battery level on the APP increases after an hour. Note: When using the camera for the first time, if camera there is no power at all, please remove the battery and charge the battery with an ordinary USB cable Otherwise it won't work.1. No Need to Change the Batteries compatibility Compatible with Stick Up Cam & Spotlight Cam,Pan Tilt Stick Up Camera.
• 2.Quality Assurance adopt thickened PVC material, pass 1000+ bending test, Heat-resistant connectors ensure complete safety and reliability.The cable has tensile resistance, safety, long service life. USB2.0 USB jack Silver-plated connectors, Supports Hi-Speed USB 2.0 Universal Data Transfer Speed at up to 480 Mbps. Output short protection; Over current protection.MultiProtect safety system ensures complete protection for you and your devices.
• 3. Long & Flat Cable - 5 Pack 13.2Ft/4m extension power cable allows you to charge your camera inside or outside your house. Flat cable can pass through windows or doors without any difficulty to charge your camera.Output: 5V 2A Input:100-240V 50-60Hz. Super Quick Safely Charging: Supports maximum 2 Amp current. Made with 23 AWG high Gauge Low Impedance wires, the cable charging speed is faster than ordinary USB cable.
• 4. Package Included: 5 x wall charger and 5 x 13.2ft long cable cord
• 5.Ensure High quality is a real guarantee, What we can guarantee is that the quality of the product will pass, and you can rest assured buy. 30 Days Money Back Guarantee, If there is any quality problem, please contact us and we will refund for you.

• ZITAY specially designed this battery plate to replace the original battery compartment of the zcam camera. The camera is powered by the outside of the plate. It supports NP Series batteries and is easy to replace.
• A switch device is designed on the side to avoid friction and damage to the battery. Press the switch in and the battery will be in a loose state. Move away your hand and the battery is in a fixed state.
• Equipped with four screws and a disassembly wrench, easy to disassemble.
• Aviation grade aluminum alloy material is integrally formed, sturdy and durable.
• Quick release design, lightweight and easy to install

• COMPATIBLE WIHT: PANASONIC Lumix FZ300, FZ2500, DMC-FZ200, FZ1000, GH2, G5, G6, G7, Lumix GX8, G85 and Sigma DP0Q DP1Q DP2Q DP3Q Digital Cameras.
• DMW-DCC8 DMW-AC8 AC Power Adapter DC Coupler Charger Kit Gonine DMW-BLC12 Battery Replacement for PANASONIC Lumix FZ300 DMC-FZ200 FZ1000 GH2 G5 G6 G7 GX8 G85 and Sigma DP0Q DP1Q DP2Q DP3Q Cameras.
• NSTRUCTIONS: This kit's DMW-DCC8 dummy battery is new version can leading-out wire from both side, can implement original DC Coupler's all functions. But our DC Coupler can't use alone,you need equip; ADVANTAGE:This kit exactly implement for lengthy studio shoots with no need to continuously replace and recharge multiple batteries.
• PACKING LIST: This Kit includes an US AC cord to plug into the outlet, a DMW-DCC8 Power Supply Connector to attach to the camera's battery port, and an AC / DC adapter to connect the AC wire and DMW-D
• Power Source Type: Corded Electric

• Dtap power cable with 19.5V output
• Compactiable to FX6, FX9 video camera
• Get power from V-mount or Gold mount batteries
• Cable length: 20inches / 50cm

• Aluminum Alloy Material Nitze N21-D7 v mount plate with rod clamp is made of aluminum alloy which is sturdy and durable.
• DC&D-tap Ports Provides one 8V/3A DC jack and two 14.8V/3A D-tap sockets.
• USB-C Port The USB-C ports supports 5V/2.4A,9V/3A,12V/2A(PD3.0/QC3.0/FCP) output.
• 15mm Rod Clamp The included 15mm rod clamp can be attached by two 1/4\" screws vertically or horizontally due to the 1/4\" threaded holes one the bottom and back of the v mount plate.
• Note Please pay attention to use the same adapter cable as the v mount plate interface voltage to avoid short circuit.

• [SECURE & EASY ASSEMBLY] with Flexible Installation Options for Various Shooting Needs
• [MOUNTING OPTIONS] Secure and compatible with DJI Ronin to Tripods, Sliders, Jibs, Car Mounts, and Stabilization Systems via 1/4\"-20 and 3/8\"-16 threads
• [CONSTANT POWER] Operate and compatible with DJI Ronin for Longer Durations with Higher Capacity Gold and V-Mount Batteries
• [EXTRA SECURITY] via the Side Holding Bracket which Provides an Additional Point of Contact
• [COMPATIBILITY] Specifically Designed compatible with DJI RS2 and RS3/4 Pro

• Battery Information Battery Type: Lithium|Voltage: 18 Volt|Capacity: 3600mAh| Replacement Battery and Charger for Ryobi 18V Battery
• Compatibility 100% Compatible with Ryobi 18v P102, P103, P104, P105, P107, P108, P109 P190 P122,fit for Ryobi charger P117 P118
• High performance 3600mAh higher capacity battery,provides longer run time and long-lasting performance.High quality battery cells integrated microchip protects the battery and extends lifetime.LED indicator light, allows users to conveniently monitor charge levels
• Reliable Quality Our batteries are CE, ROHS, PSE certified, tested by manufacturer to match OEM products,built-in protection against potential damage caused by overcharging, overdischarge, and overcurrent, extending battery life
• Safety & Stability Our products are CE, RoHS, PSE certified, tested by manufacturer to match OEM products, safe for you or your family members to use.No Memory Effect, Can be charged or discharged as needed without loss of capacity

• Kit with OM SYSTEM BLX-1 battery and BCX-1 charger
• High quality rechargeable lithium-ion battery
• Provides a high capacity of 2280 mAh
• Can be recharged about 500 times
• The charger can charge two batteries at the same time

• 1. BMS intelligent chip supports 100W (Max.) fast charging, fully charged in 2.5 hours.
• 2. Imported top-class large-capacity LG battery cell endures repeated charging and discharging, safe and stable.
• 3. Highly integrated design, about 70% the size of a normal V-mount battery, lighter and more portable.
• 4. Interfaces: 2 USB-C, 1 D-Tap, 1 USB-A, 1 8V-OUT, 1 12V-OUT, each with a shunt design to allow simultaneous USB-C and USB-A fast charging.
• 5. Aluminum alloy and fireproof PC, sturdy and drop-proof.

• All-weather External Power. IP65 rated
• Machined billet Aluminum mount frame is black anodized
• X~PWR-H8 cable is custom designed to provide all-weather seal to the camera
• Aluminum Cable Retainer holds cable securely in place to prevent damage to camera USB-C socket
• X~PWR-H8 is NOT waterproof. It cannot be submerged

Popular Categories on BuyBestBrands.in