Flash Accessories By SmallRig

• Compatibility : SMALLRIG Top Handle with Locating Holes for ARRI 3765 is designed to facilitate low-angle shot and reduce burdens on arms, compatibility for Universal cold/hot shoe mount
• Lightweight Only 124g : Hollowed-out design makes it weigh only 124g. Mostly made of aluminum alloy, together with anti-slip and anti-freeze silicone
• Built-in Cold Shoe Mounts : It has 3 front cold shoes and 2 rear cold shoes that allow simultaneously mounting microphone, LED light, monitor, and other accessories
• Mounting Points: SMALLRIG Camera Grip has an abundance of 1/4\"-20 and 3/8\"-16 mounting points for other accessories. An Allen wrench helps tighten the locking screw, making it easy to assemble and disassemble
• Related Products: 3/8\"-16 locating holes support Monitor Mount 2903, 2348 to attach monitors; 1/4\"-20 threaded holes support Magic Arm 2070 for monitors

• SmallRig hyper reflector is compatible with lights of Bowens mount.
• The angle will change the Illumination angle to angle and improve the brightness a lot.
• The reflector is perfect for Youtube videos, live-streaming, studio, photoshoots. etc.
• Made of high-quality aluminum material, solid and durable.

• For Sony Alpha 6700: SmallRig Dual Cold Shoe Mount Plate 4339 is designed to add cold shoe mounts to attach microphone, LED video light, etc. for Sony Alpha 6700. It is the simplest solution to mount your vlogging mic or light.
• Stable and Anti-twist Design: SmallRig Plate 4339 is firmly connected to the camera with two M2.5 screws and the shoulder strap holes on both sides. Note: Please remove the strap ring on both sides of the camera before installing this plate.
• Multiple Mounting Points: Giving full access to camera hot shoe, the plate 4339 comes with two built-in cold shoe mounts for attaching microphone and LED video light at the same time, as well as additional holes for shoulder strap.
• Essential for Vlogging: SmallRig 4339 is a good solution if you intend to attach a microphone and vlog yourself. With its lightweight and compact design, it provides the perfect solution for mounting your microphone or light.
• Lightweight: The lightweight plate is designed to keep your setup simple so that you can hold it on the camera all the time

• Comfortable Ergonomic Grip: The NATO top handle features a silicone part with a 4-finger texture, providing a more comfortable and anti-slip grip. It is designed for easy low-angle shooting and to reduce strain on the arms.
• Wide Compatibility: Comes with a 50mm NATO Rail, allowing the top handle to be compatible with any camera cage featuring two 1/4\" threaded holes. The handle can slide directly onto the NATO Rail and be secured with the built-in knob, making it easy toassemble and disassemble.
• Lightweight and Solid: The handle w/ NATO Rail is made of aluminum alloy and features a hollowed-out design, which ensures that the handle weighs 144g (0.31lbs) while supporting a weight of up to up to 10kg (22lbs).
• 5 Built-in Cold Shoe Mounts: The front of the handle has 3 cold shoe mounts, while the back end has 2, allowing for connection of up to 5 external devices simultaneously, such as LED light, monitor, microphone, transmitter, and more.
• 12 Threaded Holes: Ten 1/4\" threaded holes and two 3/8\" threaded holes for arri could attach more accessories, such as monitor mount 2903B and magic arm 2066B.

• Exclusive QR-Slide Patented Structure: This quick release plate kit consisted of a QR cold shoe adapter and a QR cold shoe baseplate, just press one button to slide the cold shoe mount into the groove from both direction, and lock it by releasing the button. The cold shoe mount is standard size, also compatible with previous cold shoe accessories.
• Safety & Sturdy: The Universal QR support kit adopts roll pin positioning technology that roll pins fit snugly into the groove, ensuring firm locking. The bottom of QR cold shoe adapter features an anti-detachment pin, preventing installation slippage.
• Anti-Scratch:The top of the quick release cold shoe adapter is equipped with silicone pads to avoid scratching on the cold shoe accessories and reducing shaking. The adapt can mount cold shoe accessories up to 800g / 1.8lb. (such as LED video light, microphone, etc.)
• Multiple Mounting Solutions: The baseplate is equipped with two spring-loaded locating pins to ensure stability and a 1/4\"-20 screw to attach any accessories with a 1/4\"-20 threaded hole, such as SmallRig action camera cages (ID: 4119B, 3084C, 4088B) and camera cages.
• HawkLock QR Ecochain: Using with our HawkLock Ecochain can enhance your shooting experience,such as Quick Release Advanced Cage Kit for Sony Alpha 7RV/ Alpha 7 N/ Alpha 75 III (ID:4539); H21 Quick Release Top Handle Kit (ID:4483); H21 Quick Release Rotating Side Handle Kit (ID:4485); H21 Quick Release Monitor Support with NATO Clamp (ID:4487); H38 Quick Release Mount Plate for Arca-Swiss (ID: 4486); H21 Quick Release Magic Arm with Ball Head (ID:4488); H21 Quick Release Rosette Magic Arm (11\") (ID:4489); H21 Quick Release Rosette Magic Arm (7\") (ID:4490);HawkLock H21 Universal Quick Release Mount Plate Kit (ID:4491)

• 1. Both the baseplate and side plate have an Arca-Swiss quick-release plate for the Arca-Swiss tripod for horizontal and vertical shots.
• 2. A hinge arm at the battery door fits the camera curve for a comfortable grip and facilitates battery replacement.
• 3. 1/4\"-20 threaded holes, cold shoe mount for multi-scene shooting.
• 4. A stretchable side plate leaves room for plugging in cables.

• SUPPORTS SHOE MOUNT ACCESSORIES SmallRig Cold Shoe Mount 2797 is designed for accepting shoe mount devices such as flashes, lights, microphones, etc. You can mount a microphone, video light, or other accessory, and the safety catch on the end locks your accessory in so it doesn't slide out. NOTE: This cold shoe mount only Compatible with products with cold shoe base and hot shoe without electronic contacts
• WIDE COMPATIBILITY Fits any cages, ball heads or any other rigs features standard 1/4\"-20 female thread and 1/4\"-20 screw.
• TWO INSTALLATION METHODS The cold shoe mount secures to rigs, brackets, and cages via a 1/4\"-20 screw, and mounts to ball heads, magic arms, and monitor mounts via the integrated 1/4\"-20 female thread.
• ANTI-TWIST DESIGN Featuring safety release in one end prevents the accessory from detaching accidentally to ensure your devices safe. An Allen wrench is included to tighten the screw.
• COMPACT DESIGN The mount weighs only 32g, the pocket size cold shoe mount is exceptionally lightweight and damage resistant.

• Key Features 1. Compatible with Blackmagic URSA Mini Camera 2. Arrays of mounting holes for attaching accessories 3. ARRI locating holes for attaching ARRI compatible e*tension blocks

• Make sure this fits by entering your model number.
• It includes a 1/4 counter bore slot and a cold shoe. 1/4 counter bore slot could be mounted on the 1/4 threaded holes on the right side of Cage for A6500 1889.
• The arrowheads on the cold shoe point to anti-off direction.
• The cold shoe is compatible with RODE crophone, wireless crophone and RODE SVMX crophone.
• The cold shoe extends beyond the cage, thus it will not block the buttons and ports of the cage.

• Exclusive Imprinted Hot Shoe Cover: Offered in black finishes as standard, the top of the hot shoe cover features the exclusive imprint of sound wave for FUJIFILM and the foundation year for FUJIFILM.
• Ergonomic Design: SmallRig Thumb Grip for FUJIFILM X100VI / X100V is designed to enhance the grip and improve safety when holding the camera with one hand.
• Enhanced Protection: Thumb grip built-in silicone pads protect your camera and hot shoe electronic components from dust, rust, and electronic shorts. Meanwhile, the fitted design makes sliding into the hot shoe of the camera easy.
• Shutter Release Button Included: Comes with a concave shutter release button to ensure a soft and comfortable finger touch.
• Related Products: SmallRig publishes many products for FUJIFILM X100VI. If you needed, please search L-shape Grip (Sliver) ID: 4555 and (Black) ID: 4556; Leather Camera Cases ID: 4558.
• Notice: In order to protect the camera's hot shoe, a gap of approximately 1 mm is reserved between the silicone pads of the thumb grip and the camera in the design.

• 1. Reduces wind noise in outdoor scenes
• 2. Cold shoe mount for attaching mini LED light
• 3. Built-in cushions protect hot shoe of the camera
• 4. Made of tough and strong nylon

• Easy To Use : The holder enables to tilt 185

Popular Categories on BuyBestBrands.in