10Gtek for Cisco SFP-10G-SR, 10Gb/s SFP+ Transceiver Module,10GBASE-SR, MMF, 850nm, 300-meter, Pack of 4 - Product Features
- For Cisco SFP-10G-SR
- SFP+ SR Transceiver
- Data Rate: 10.3Gb/s
- Wave Length: 850nm
- Reach: 300-Meter
10Gtek Cisco Compatible GLC-T SFP-GE-T Gigabit RJ45 Copper SFP Transceiver Module 1000Base-T For Cisco SFP-ZX: 80km - Product Features
- 1.25G SFP Transceiver 1000Base-ZX, 1550nm SMF, up to 80 km, for Cisco GLC-ZX-SMD, Ubiquiti UniFi, Mikrotik, D-Link, Supermicro, Netgear, TP-Link, Broadcom, Linksys and More.
- Data Rate: 1.25Gb/s
- Wavelength: 1550-nm
- Reach: up to 80 km; Fiber Type: Dual LC single-mode fiber
- Wide Compatibility - for Cisco, Meraki, Ubiquiti, Mikrotik, D-Link, Supermicro, TP-Link, Broadcom, Linksys and Other Open Switches.
10Gtek for Arista QSFP-SR4 40Gb s QSFP Transceiver 850nm 100m For Cisco 40GBase-LR4: 10km - Product Features
- 40GBASE-LR4 QSFP+ to LC Optical 40G Ethernet Transceiver Module, Single Mode, 4 CWDM Lane Internal Module in 1310nm Window, Duplex LC Connector, DDM, 10km, 40G Ethernet Rate Only
- Wide Compatibility - Cisco QSFP-40G-LR4 and other open switches. Conforms to IEEE 802.3ba standard, SFF 8436, and QSFP multi-source agreement
- EASY TO USE - Easy to install, plug and play, fully hot pluggable. Widely used in fiber switches, routers, NICs, servers, or other fiber optic equipment with 40Gb QSFP+ ports
- GREAT DDM FUNCTION - With DDM you can monitor important information about the status of transmitting and receiving signals in real time and find potential issues
- 10Gtek is the manufacturer of Walkie Talkies. Customized service is available
Gigabit Ethernet Media Converter, 1.25Gb/s, Single-Mode SC Fiber, 1000Base-LX to 10/100/1000Base-Tx, up to 20KM, Pack of 2 - Product Features
- ?Smart Management?1x Dual SC fiber Optical Port: 1.25Gbps, 1310nm wavelength, Dual SC fiber, support Gigabit Ethernet; 1x RJ45 Port: UTP CAT5 10M/100M/1000M, Supports Full/Half Duplex auto-negotiation
- ?High-quality and Widely Compatibility?Equiped with QUAL COMM QCA8334 chip to ensure stability and Ultra-low time-delay data transmission. Complies with IEEE 802.3/802.3u/802.3z/802.3ab, 10/100/1000Ba
- ?Easy Installation and Use?Modulization configuration design, support hot-swappable, plug and play. And LED indicators for TX, FX LINK/ACT, POWER, FDX can dynamic feedback link connection state and fa
- ?Compact Design?Only 9.3 cmx 7.1cm x 2.7cm(3.7\"x 2.8\"x 1\") in measurement. Its compact modular design facilitates deployment in a narrow desktop location to save space.
- ?What You Get?2x Gigabit Ethernet Media Converter, 2x DC Power Adapter, 2x Product Manual. 30-day Money-Back guarantee with 1 Year warranty and lifetime tech support.
10GBase-SR SFP+ Transceiver, 10G 850nm MMF, up to 300 Meters, Compatible with Intel E10GSFPSR, Pack of 2 - Product Features
- Data Rate: 10G
- Wavelength: 850-nm
- Reach: up to 300m
- Fiber Type: Dual LC OM3/OM4 multi-mode fiber
- Compatible with Intel E10GSFPSR
10Gtek for Intel Compatible 10GBase-T SFP+ 10 Gigabit RJ45 Copper Transceiver 30-Meter - Product Features
- Compatible for Intel SFP+ 10GBASE-T (Coding as Intel E10GSFPSR)
- 10GBase-T, 10Gb/s SFP+ Copper RJ-45 Transceiver
- The 10GBASE-T is specifically designed for high speed communication links that require 10 gigabit ethernet over Cat 6a/7 cable. Cost effective at up to 30m distance on UTP cables. Supports 100/1000Bas
- 100% Compatible with Intel. 10Gtek owns Compatibility LAB to meet the coding requirements for various brands of switches and routers. Every transceiver is individually tested on Intel switches and we
- 10Gtek offer more compatible options, if your brands not listed above, pls contact us.
QSFP+ to QSFP+ Extender, with EEPROM on the Extender side, 30AWG, 30cm length - Product Features
- 40G Transceivers/AOCs Solution for Liquid Immersion Cooling System
- with 3M flexible cable
- Insertion Loss 7.5dB on 40Gbps application
- Oil-resistance, dust-proof and anti-corrosion
- Customizable EEPROM mapping
1.25G/2.5Gbps Two Ports SFP Mode Converter, SFP Repeater (without Transceiver) - Product Features
- [Multiple Conversion] 1.25G/2.5Gbps OEO(optical-electrical-optical) media converters provide you a cost-effective, strong anti-interference ability and stable data transmission solution for Wavelength Conversion, Fiber Mode Conversion, Fiber Count Conversion and Signal Repeating. NOT support PON. (NOTE - Due to a defect in the converter, the deployed SFP CAN'T be unplugged. Therefore, the SFP CAN'T be replaced. But this willl not affect the product performance.)
- [Widely Compatibility] Two SFP slots support data rates from 100Mbps to 2.5Gbps Multimode, Singlemode, CWDM, Dual Fiber and Single Fiber SFP transceivers to achieve Wavelength, Fiber Mode and Fiber Count Conversion. (Important: Use matching speed modules in SFP1 and SFP2 only.)
- [Protocol Transparent] Equiped with RTL8213B chip to ensure stability and Ultra-low time-delay data transmission. Compliant with all protocols, as long as the data rate is correct. Protocol independence allows for use in broad range of applications including Fast Ethernet, Gigabit Ethernet, OC-12 and Fiber Channel.
- [Plug and Play] Modulization configuration design, support hot-swappable, plug and play. LED indicators for P1, P2, POWER, can dynamic feedback link connection state and fault detection to easily monitor network status.
- [What You Get] 1x Two Ports 1.25G/2.5Gbps SFP OEO Mode Media Converter, 1x DC Power Adapter, 1x User's Manual. 30-day Money-Back guarantee with 1 Year warranty and lifetime tech support.
[Green] Colored 10G SFP+ DAC Cable - Twinax SFP Cable for Ubiquiti UniFi Devices, 1-Meter(3.3ft), 2 Pack - Product Features
- 10GbE SFP+ to SFP+ DAC Direct Attach Copper Twinax Cable, Passive, 2-Meter(6.5ft), 30AWG.
- SFP+ Cable can connect switch, router, server, NIC or other fiber optic equipments with SFP+ ports for Network Attached Storage, Storage Area Network and High Performance Computing.
- Compatible with Ubiquiti ES-48/ES-16-XG devices.
- In 10Gtek's Signal Integrity Lab, we 100% passed TDR & VNA tested. And each DAC Cable is individually tested on switches before delivery.
- Backed by 10Gtek 30 Days Free-returned, 5-Year Free Warranty and Lifetime Technology Support. 10Gtek is a manufacturer of Direct Attach Copper Cable, Customized sevice also is available.
10Gtek for Cisco GLC-BX-U and GLC-BX-D, a Pair of 1000BASE SFP Bidi Transceiver Module, 20KM - Product Features
- Compatible for Cisco GLC-BX-U and GLC-BX-D.
- 1000BASE-BX-U and 1000BASE-BX-D Bidirectional SFP Optic, up to 20km over single LC.
- SFP Bidi Transceiver, 1.25Gb/s SFP Bidi, Single LC connector, Wavelength: Up: TX1310nm/RX1490nm; Down: TX1490nm/RX1310nm.
- 100% Compatible with Cisco. 10Gtek owns Compatibility LAB to meet the coding requirements for various brands of switches and routers. Each transceiver is individually tested before delivery.
- 10Gtek offers more compatible options, if your brands not listed above, pls contact us.
1.25G Media Converter, SFP Slot, Power Inside, Without Transceiver - Product Features
- Fiber Port: SFP slot (1.25G), without Transceiver
- Fiber Type: up to SFP option
- RJ-45 Port: 10M/100M/1000Mbps, full/half duplex auto-negotiation, MDI/MDIX auto-crossover
- Cable Type: UTP/STP Cat.5e for 100 meters
- Built-in power supply, 100-240V
1.25G Media Converter, small size, SFP 550m - Product Features