Repeaters And Extenders By Tripp Lite

• Tripp Lite
• B130101U

• Tripp Lite
• B1301012

• Extends a 1920 x 1440 (60Hz) video and audio signal up to 500 ft., or a 1024 x 768 (60Hz) video and audio signal up to 1,000 ft., when using 24Awg, Solid Wire Cat5e/6 cable, such as Tripp Lute's N022-01K-GY (Cat5) and N222-01K-GY (Cat6)
• EDID copy feature ensures optimal display compatibility
• For optimal image quality between 500 and 1,000 ft., use Zero-Skew cable, such as Tripp Lite P524-01K
• The remote (Receiver) unit features built-in Equalization and Gain controls to adjust the video image
• Includes mounting hardware for both local and remote units, allowing them to be wall mounted, rack mounted or pole mounted
• 1-year limited warranty

• EXTENDS NETWORK CONNECTION OVER FIBER OPTIC CABLE: Extends 10/100/1000 Mbps Gigabit Ethernet network connection over fiber optic cable using your choice of SFP transceiver. Automatic MDI/MDI-X configuration connects devices without crossover cabling.
• MONITOR YOUR INSTALLATION: LEDs indicate connection, statuses, and data transfer speed. Local Loop Back (LLB) functions ensure copper and fiber cables have been correctly installed. DIP switches control each function and turn them on or off.
• BUILT TO WITHSTAND INDUSTRIAL STRENGTH HAZARDS: Operating temperature range of -40 to 75?C or -40 to 167?F. Protected from electrostatic discharge (ESD), radio frequency interference (RFI) and power surges. DIN mounting hardware included.
• COMPLIANT PRODUCTS FOR GOVERNMENT BUSINESSES: Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases.
• RELIABLE PRODUCT FULLY BACKED AND SUPPORTED: This product is covered by a 2-Year Limited Warranty and is supported by Tripp Lite's Chicago-based expert technical support team over phone and email.

• Supports a maximum resolution of 1920 x 1440 (60Hz)
• Works with a B132-002A-2 or B132-004A-2 local transmitter unit to extend a 1024 x 768 (60Hz) Video and Stereo Audio signal up to 1,000 ft. when using 24Awg, Solid Wire Cat5e/6 cable
• For optimal image quality between 500 and 1,000 ft., use Zero-Skew cable, such as Tripp Lite P524-01K
• Features built-in Equalization and Gain controls to adjust the video image
• RJ45 type wallplate allows you to use standard patch cable, eliminating the need for a 110 punch down connection

• 10GBASE-SR ALTERNATIVE: Functionally equivalent to wide range of 10GBase-SR transceiver modules. MSA-compliant device functions just like equivalent 10GBase-SR transceiver modules and is manufactured to meet or exceed specifications. You can use this transceiver with any compatible router, server or switch.
• SFP+ TRANSCEIVER: 10G module for connecting to your network switch or server. Allows you to connect a multimode fiber optic cable to a 10 Gbps network router, server or switch.
• HOT SWAPPABLE: Input/output device is fully hot-swappable, so you can install it without a potentially costly 10 Gbps network shutdown or device reboot. Simply plug the SFP+ end of the transceiver into your network device. Convenient bail clasp latch helps you carefully remove the module from the device.
• REAL TIME STATUS MONITORING: DDM (Digital Diagnostic Monitoring) support lets you keep track of operating information in real time, such as transceiver temperature, input and output power and supply voltage.
• RELIABLE PRODUCT FULLY BACKED AND SUPPORTED: This product is covered by a 3-Year Limited Manufacturer's Warranty and is supported by Tripp Lite's expert US-based technical support team over phone and email.

• CICSCO COMPATIBLE: This SFP28 transceiver module meets or exceeds MSA standards and is designed, programmed and tested to work in all MSA-compliant platforms, and is 100% compatible with Cisco's equivalent module, SFP-25G-SR-S. You can use this transceiver with any compatible Cisco router, server or switch and receive the same performance.
• SFP FIBER MODULE PERFORMANCE: Connect a multimode fiber optic cable to a 25 Gbps network router, server or switch, and transmit data up to 100 meters (328 feet) using an 850 nm wavelength. Connection: LC Duplex (Female) & SFP28 (Male)
• EASY INSTALLATION: Just plug the SFP28 end of the transceiver into your Cisco network device. The other end has an LC duplex connector to link with multimode fiber optic cable (sold separately). A push/pull tab connector is easily accessible in high-density data center applications and makes the plug-and-play transceiver easy to install and remove with one hand.

• GIGABIT EXTENDER BETWEEN POWERED SOURCES: Extends a 10/100/1000 Mbps network connection between a powered source device and two PoE/PoE+ devices up to 328 ft. Cascade up to three for connection as far as 1,312 feet (400 meters).
• DUST AND WATER RESISTANT: IP67 rated aluminum housing is 100% protected against dust and sand. Rated for immersion in one meter of water for up to 30 minutes, as well as water spray from all directions, with no damage or decline in performance.
• VANDALISM AND IMPACT RESISTANT: IK10 rating (the strongest IK rating) means the aluminum housing is vandal-resistant up to 20 joules the equivalent of dropping an 11-pound weight on the extender from a distance of 15 inches.
• SIMPLE PLUG-AND-PLAY INSTALLATION: No configuration or software is required to add the NPOE-EXT-2X1G30 to your LAN. Just connect your switch or network jack and your PoE/PoE+ devices to the shielded Power + Data ports using existing Cat5e/6/6a cable.
• RELIABLE PRODUCT FULLY BACKED AND SUPPORTED: This product is covered by a 2-Year Limited Warranty and is supported by Tripp Lite's Chicago-based expert technical support team over phone and email.

• Tripp Lite
• B126004

• Best Quality
• Tripp Lite
• Original Product

• Best Quality
• Tripp Lite
• Original Product

Popular Categories on BuyBestBrands.in