Electronics Store - Laptops And Accessories - Data Storage - Hard Drives

• Support for SDHC, , SD3.0, wifi SD, UDMA 6, I/O mode, IDE mode.
• Support a single 128GB or more. Maximum capacity can up to 2TB.
• Suitable for those cameras equipped with standard CF card.
• It is fixed for it is manual plug.
• This is adapter card for SD to CF conversion.

• Memory capacity expansion on your PCs, and large capacity for photos, movies, files, etc., bringing more convenience to your life.
• High-speed transmission of files, videos and pictures, saves your time and improves your working efficiency.
• USB 3.0 offers high-speed transmission, faster than the ordinary mechanical disk.
• Easy operation, no driver required, plug and play, convenient to use.
• Practical and easy to use, providing convenient and reliable services to store your important data.
• Warranty not applicable for this product

• This adapter card only supports M.2 interface PCI-E(Key M) channel NVME SSD, not support SATA, mSATA protocols.
• Compatible with 40mm(2242)/60mm(2260)/80mm(2280) M.2 PCI-E(Key M) NVME SSD.
• Adopt JMS583 master chip, support USAP acceleration, support TRIM instruction.
• Low latency, low power consumption.
• Easy connection, no cable required.

• This is a M.2 to SATA3.0 expansion card.
• Equipped with 5 SATA3.0 ports, each port provides up to 6G s transmission rate.
• Adopt JMB585 chip scheme, high speed and stable performance. Not only can meet the high-end transmission standards, but also has good compatibility.
• Plug and play, convenient to use.
• Widely compatible with Linux, Win7, Win8, Win8.1, Win10(32/64 bit), etc.

• Equipped with 12pcs 6Pin output ports, convenient to use.
• The LED voltage display s n can display the voltage of the main power supply in real time.
• 12V output power, powerful and stable.
• Compatible with following power supply modes: DPS-1200FB A, DPS-1200QB A, HSTSN-PL12, PS-2751-LF-1F, PS-2112-5L, DPS-700LB D, DPS-750RB A.
• Small size, not occupy space.

• USB2.0 transmission interface, the data transfer rate up to 480M s, backward compatible with USB1.1.
• Tool-free design, easy to install.
• It supports 2.5''7-9.5mm IDE D.
• Support hot plug, plug and play, no driver required.
• Lightweight and portable, convenient to carry, convenient to use.
• Warranty not applicable for this product

• This adapter card is designed for desktop computer and laptop, can transfer wireless M.2 card module to USB port.
• Easy installation, no need to install the driver, but you must ensure that the M.2 card module has installed the software driver.
• Support 30*42 type NGFF(M.2) Key B card.
• Support 6-bit/8-bit SIM card connector.
• No external power supply required, support hot swapping.

• M.2 Dual-protocol(SATA/NVMe) interface to U.2 interface.
• Indicator light, the NVMe SSD read/write indicator blinks, and the SATA SSD read/write indicator is steady on.
• Simple and convenient, easy to install.
• 32G s, better performance.
• It is compatibility, support 2242/2260/2280 three size.

• Supports UASP transport protocol.
• Supports SATA III, backwards compatible with SATA II/SATA I.
• Supports standard notebook 3.5/2.5\" SATA hard driver.
• Transfer rates up to 6G s when connected to a USB 3.0 port, backward.
• Compatible with USB 2.0 or 1.1.

• Compliant with UASP protocol, compatible for Win 8, for Mac OSX (10.8 or above) and for Linux OS, increasing read speed by 70% and write speed by 40% compared with traditional USB 3.0 at peak performance.
• Support SATA III transfer rates up to 6 G s, SATA II 3 G s and SATA I 1.5 G s.
• Support over 2TB capacity 2.5\"/ 3.5\" SATA SSD D, plug and play, driver free, tool-free installation.
• Quick drive access for data migration & backup, drive cloning & upgrading, retrieving data from an old SATA drive.
• Made of environmental e ASB materials, enduring wear and tear, stability and durability. Compact size, elegant in shape, portable.

• This is a M.2 to SATA3.0 expansion card.
• Equipped with 5 SATA3.0 ports, each port provides up to 6G s transmission rate.
• Adopt JMB585 chip scheme, high speed and stable performance. Not only can meet the high-end transmission standards, but also has good compatibility.
• Plug and play, convenient to use.
• Widely compatible with Linux, Win7, Win8, Win8.1, Win10(32/64 bit), etc.

• It converts 3G/4G module of Mini PCI-E interface into USB signal to realize wireless Internet access.
• Adopt built-in vertical USB 9PIN installation mode, USB interface and external 5V auxiliary power supply are used to solve the problem of network disconnection caused by insufficient power supply.
• This product is a conversion card and cannot work independently. You need to install the module and SIM card at the same time.
• Not apply to WiFi modules with Mini PCI-E interface.
• Small size, not occupy space.

• WETEK High Quality Material, Perfect Horizontal Screwless Design. Both 2.5\" SSD/HDD Can Be Supported & Placed Stably.
• USB 2.0 External Interface, Campatible With USB 1.1. USB 2.0 Super Speed 480mbps.
• 3 Seconds Installation: slide disassembly design, No screws Installation
• Grid texture design: excellent hand felling, adopts Non-Toxic environmental ABS material, good heat dissipation, grid texture surface processing, anti-skid and fingerprint- free
• External power and Data high speed USB 2.0 mini 5 pin and internal power

• It converts 3G/4G module of Mini PCI-E interface into USB signal to realize wireless Internet access.
• Adopt built-in vertical USB 9PIN installation mode, USB interface and external 5V auxiliary power supply are used to solve the problem of network disconnection caused by insufficient power supply.
• This product is a conversion card and cannot work independently. You need to install the module and SIM card at the same time.
• Not apply to WiFi modules with Mini PCI-E interface.
• Small size, not occupy space.

• Exquisite quality aftermarket 3.5\" hot swap Gen2 SAS SATA drive caddy for IBM M4 and M5 series servers.
• Delicate non-toxic raw materials and precise mold stamping shape. Works 100% as original OEM caddy.
• Replace your cracked, faulty or damaged D caddy with a e quality new one.
• Integrated welding process and optimal louve n to accelerate heat dissipation.
• Equipped with 4 mounting screws for fixed easy installation.
• Warranty not applicable for this product

• Fully compatible with SATA III.
• Meet the standard 7+15 pin plug connector.
• No change on the mSATA SSD performance.
• No extra driver is need.
• It only supports Mini PCIe mSATA de ed SSD.
• Warranty not applicable for this product

Popular Categories on BuyBestBrands.in