Cutting Tools By Bosch

• The SDS plus-5X Drill Bit offers highly efficient drilling in reinforced concrete. The geometrical form of the 4-cutter head prevents jamming and breakage for optimal results
• The turn-angle head and the large and short dust removal channels within the 4-flute design provide fast dust removal so the bit can slice through concrete and rebar quickly with reduced wear. For efficient work and exact hole diameters, the centring tip guides drilling from the start, to prevent wandering, which can falsify the hole diameter. The bit is intended for use on masonry, concrete and reinforced concrete
• As proof of quality, the drill bit bears the test mark of the PGM Masonry Drill Bit Association Board, guaranteeing compliance with tight tolerances, exact drilling and the firm hold of fixings. It is compatible with rotary hammers with SDS plus holders
• Diameter (D) mm: 12,00

• The HSS Twist Drill Bit Cobalt provides long-lasting performance when drilling stainless steel. This extended lifetime results from a cobalt alloy content of 5% and fully ground HSS (high-speed steel), which provides excellent surface quality, wear resistance and heat protection. Equipped with two cutters and two flutes, chips are removed quickly to make the bit last even longer.
• This drill bit works with alloyed and non-alloyed steel, stainless steel, cast iron, cast steel and acid- and heat-resistant steels. The HSS Twist Drill Bit Cobalt is manufactured to DIN 338. The drill bit is Type N (flute angle) with a 135-degree tip and a diameter tolerance of h8. Active cutting and perfect centring without wandering are achieved by the pointed split-point tip.
• This drill bit works with alloyed and non-alloyed steel, stainless steel, cast iron, cast steel and acid- and heat-resistant steels. It has a cylindrical shank system (shank equal to drill bit diameter) and is intended for use in drill stands and drill drivers.
• Diameter (D) mm: 5,00 Working length (L1) mm: 52 Total length (L2) mm: 86 Packaging Content-10

• Twist drill bit made of high speed steel manufactured to DIN 446
• Right-hand cutting twist drill bit, Type N, 135 degree drill bit tip, split, point manufactured to DIN 1412 C, diameter tolerance h 116
• Shank equal to drill bit diameter, drill bit colour: polished
• Two-cutter, cylindrical, two flutes
• Size mentioned = Diameter*working length*Total Length

• Holds Grinding ToolsWith Locking Nut
• Collet holds grinding tools while working
• Comes with a locking nut
• Compatible with straight grinders

• Material: Canvas, Color: Blue
• Package Contents: 1-Piece Screwdriver, 7-Pieces Screwdriver bits L=25mm PH1, PH2, PH2, SL6, SL7, Hex6, T15, 1-Piece Hammer, 1-Piece Sawing Handle, 1-Piece Saw Blade and 4-Pieces Nutsetters 7/8/10/13
• No warranty
• User friendly design: Multi type of bits and handy tools suitable for AP specific application can improve user experience
• Special-purpose packaging: Nice looking canvas bag for tender; Strong cover for online transit
• Made from high-grade steel: Provides long durability
• The hammer has ergonomic comfort grip features a ribbed surface and flared end to provide a firm grip and reduce slippage
• Solve your wood working task at home by yourself

• Twist drill bit made of high speed steel manufactured to DIN 338
• Right-hand cutting twist drill bit, Type N, 135 degree drill bit tip, split, point manufactured to DIN 1412 C, diameter tolerance h 8
• Shank equal to drill bit diameter, drill bit colour is polished
• Two-cutter, cylindrical, two flutes

• For use with jigsaws with T-Shank clamping systemsThe T 301 CD Clean for Wood Jigsaw Blade delivers clean straight cuts in wood
• Its precision-ground teeth with taper-ground body produce clean resultsMade of high carbon steel, this blade is appropriate for cutting softwood and non-abrasive woodworking materials
• It is equipped with a medium tooth pitch (3 mm) and long length (117 mm) and cuts wooden materials with 10-65 mm thickness
• Total length [mm]: 117

• Precision: The bit's exposed 135-degree self-centering split-point tip combines active cutting and perfect centering without wandering and precision-ground bit made of HSS (high-speed steel) enables fast results. Usage: It has a cylindrical shank system (shank equal to drill bit diameter) and is intended for use in drill stands and drill drivers.
• Application: HSS Twist Drill Bit Ground offers solid drilling for standard usage drilling through metal, alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, malleable cast iron, non-ferrous metals and hard plastics, with maximum precision
• Convenient: The split-point tip also eliminates any need to pre-punch or pilot drill up to 10 mm-diameter. Diameter: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10 mm
• Packaging Content: Order / Part No: 2607019115, Pack quantity: 10 pieces

• The HSS Twist Drill Bit Ground is for drilling through metal with maximum precisionThe bit's exposed 135-degree self-centring split-point tip combines active cutting and perfect centring without wandering, delivering maximum precisionThe split-point tip also eliminates any need to pre-punch or pilot drill for up to 10 mmThe HSS Twist Drill Bit Ground is manufactured to DIN 338
• vThis precision-ground bit made of HSS (high-speed steel) enables up to 40% faster drilling rate and up to 50% lower feed pressure than standard-ground HSS drill bits with chisel edgesThis bit is designed for drilling holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, malleable cast iron, non-ferrous metals and hard plastics
• The drill bit is Type N (flute angle) with a 135-degree tip and a diameter tolerance of h8It has a cylindrical shank system (shank equal to drill bit diameter) and is intended for use in drill stands and drill drivers
• Diameter (D) mm: 3,20

• The HSS Twist Drill Bit Cobalt provides long-lasting performance when drilling stainless steel. The HSS Twist Drill Bit Cobalt is manufactured to DIN 338.
• This extended lifetime results from a cobalt alloy content of 5% and fully ground HSS (high-speed steel), which provides excellent surface quality, wear resistance and heat protection.
• Equipped with two cutters and two flutes, chips are removed quickly to make the bit last even longer. This drill bit works with alloyed and non-alloyed steel, stainless steel, cast iron, cast steel and acid- and heat-resistant steels.
• Active cutting and perfect centring without wandering are achieved by the pointed split-point tip.

• Medium-hard and soft wood as well as light building materials such as plasterboard or aerated concrete
• Applications are Installations, pipe holes, window fitting etc
• It has a Centring tip and 2 cutting edges for fast and clean drilling
• Diameter (D) mm: 12; Total length (L2) mm: 155, Packaging Content-4

• Fast and effortless: The Clean-Cut Speed Spade Bit performs extremely fast hole drilling and its self-feeding threaded tip enables the drill bit to effortlessly pull itself into the wood for high-speed drilling with little exertion
• Diameter: 16 mm; Total length: 160 mm; Hex Shank: 1/4 inch
• Packaging content: Order / Part No: 2608587504; Pack quantity: 1 piece

• To be used with rotary/impact drill machines (one adapter will fit for many sizes as mentioned below, kw8- fit for sizes 14mm to 32mm)
• For cutting bigger holes in natural wood, hardwood, plywood, woodcore plywood, chipboard-raw, veneered and laminated, fiber-reinforced composites, sandwich materials, plastics, thin sheet metals
• Cutting in aluminum, brass, bronze, copper, plastic, features: Easy and simple plug removal, work faster and smarter
• Its revolutionary design and our universal mandrel works with any brand of tool or hole saw to let you change saws in seconds
• Bi metal hole saw cuts material up to 1\" deep / bosch hole saw blade need hex adapter kw8 for fixing this blade

• Diameter (d): 8.0 mm / working length (l1): 80 mm / total length (l2): 120 mm
• Drill bit, designation: Multi purpose / material, abbreviation: Tc / drill bit, type: Multi-purpose drill bit
• Shank, shape: Cylindrical / drill bit, shape: Two flutes / drill bit, colour: Green
• Cutter, type: Tungsten carbide / cutting direction: Right / ? fast drilling / ? longer life
• Multipurpose drill bit suitable for concrete, tile, aluminium and wood

• Fast and effortless: The Clean-Cut Speed Spade Bit performs extremely fast hole drilling and its self-feeding threaded tip enables the drill bit to effortlessly pull itself into the wood for high-speed drilling with little exertion
• Efficiency: In product tests, this drill bit produces holes 10 times faster than a standard spade bitUsage: It is suitable for use on soft and hard wood, light building materials and plasterboard and is best for use with portable power drills
• Diameter: 18 mm; Total length: 160 mm; Hex Shank: 1/4 inch
• Packaging content: Order / Part No: 2608587502; Pack quantity: 1 piece

• Tool body material:High carbon steel- holesaw, hss, bi-metal
• Blade length:51mm
• Saw type:Hole
• Cutting depth max:38mm
• Tool body material:High carbon steel

Popular Categories on BuyBestBrands.in