Micro 100 AR-12 Forming Tool - AR Style - Brazed, 1/64" Corner Rad, 420" Width, 13/16" Length, 3/4" Square Shank, 4-1/2" OAL, Uncoated - Product Features
- Designed for right hand turning and facing in lathe applications
- Ground with side rake to provide a positive cutting action and better chip evacuation
- Corner radius profile
- Solid carbide tipped with zinc coated steel shank for durability and corrosion resistance
- Available in industry standard fractional shank sizes
Micro 100 FRT-8 Brazed Tool, Square Shank Diameter Full Radius Convex "Style FRT", 30.5" Length, 1/2" Width, 1/2" Height, 1/8" Thick, 3/2" Width, 3/8" Length, 1/4" Radius - Product Features
- Square Shank \"Style FRT\" Carbide-Tip Tool for Turning Full Radius
- Will Not Chip or Break under Normal Machining Conditions
- A Copper shim between two pieces of Silver solder material
- made in usa
Micro 100 GEM-375-4 Square End Mill, 3/8" Cutter Dia, 7/8" LOC, 4 Fl, 3/8" Shank Dia, 2-1/2" OAL, Uncoated - Product Features
- Long flutes for deep pocket milling and long length peripheral milling
- 30 deg helix
- Center cutting
- Square profile
- AlTiN coating option for added lubricity and increased wear resistance in difficult-to-machine materials
Micro 100 CRE-125-020 Corner Rounding End Mill - Double-Ended, 060" Fl, 020" Radius, 005" Max Lead-in Lenght, 1/8" Shank Dia, 2" OAL, Uncoated - Product Features
- Designed to mill corner radii into a part
- 1 deg max flares tangent at pilot and shoulder to avoid steps and burrs
- Cuts on radius only
- Double-ended
- AlTiN coating option for added lubricity and increased wear resistance in difficult-to-machine materials
Micro 100 CRE-187-060 Corner Rounding End Mill - Double-Ended, 060" Fl, 060" Radius, 005" Max Lead-in Lenght, 3/16" Shank Dia, 2" OAL, Uncoated - Product Features
- Designed to mill corner radii into a part
- 1 deg max flares tangent at pilot and shoulder to avoid steps and burrs
- Cuts on radius only
- Double-ended
- AlTiN coating option for added lubricity and increased wear resistance in difficult-to-machine materials
Micro 100 IT-1801000 Threading Tool - UN - Single Point, 27-56 TPI.180" Min Bore Dia, 1" Max Bore Depth.023" Offset.040" Proj.002" Radius.055" C-L Offset, 2-1/2" OAL, Uncoated - Product Features
- Designed for threading multiple thread pitches (ANSI, UN, and Metric 60 deg)
- Polished split face for improved edge retention and chip evacuation while reducing galling
- Split geometry makes the tool as rigid as possible
- Corner radius profile
- Lockdown flat automatically locates tool on center
Micro 100 IT-180750 Threading Tool - UN - Single Point, 27-56 TPI.180" Min Bore Dia, 3/4" Max Bore Depth.023" Offset.040" Proj.002" Radius.055" C-L Offset, 2-1/2" OAL, Uncoated - Product Features
- Designed for threading multiple thread pitches (ANSI, UN, and Metric 60 deg)
- Polished split face for improved edge retention and chip evacuation while reducing galling
- Split geometry makes the tool as rigid as possible
- Corner radius profile
- Lockdown flat automatically locates tool on center
Micro 100 IT-2301000 Right Hand 60 degree Internal Single Point Feeding Tool, 0.2 Inch Minimum Small Diameter, 0.00 Inch Projection, 1 Inch Maximum Bore Depth, 0 Inch Offset Point, 14 to 40 Threads Per Inch, 0.3 Inch Shank Diameter, 2.5 Inch Overall Length, Solid Carbide Tools - Product Features
- Single point internal tool for cutting
- 60 degree Angle Included
- Left handed and metric sizes also available
- Made in the USA
Micro 100 DM-250-490 Drill/End Mill, 90 degree Point Angle, 1/4" Cutter Dia, 3/4" LOC, 4 Fl, 1/4" Shank Dia, 2-1/2" OAL, Uncoated - Product Features
- Designed for chamfering, milling, and some spotting applications
- 2 flute design effective in spotting and drilling applications
- AlTiN coating option for added lubricity and increased wear resistance in difficult-to-machine materials
- 30 deg helix
- Solid carbide
Micro 100 RC-375040 Screw Machine Tool - Cut Off - Brazed, 040" Width, 120" Proj, 3/8" Square Shank, 6" OAL, Uncoated - Product Features
- Designed for cut off applications; RC for right hand and LC for left hand
- Solid carbide tipped with zinc coated steel shank for durability and corrosion resistance
- Available in industry standard fractional shank sizes
- Ground in the USA
Micro 100 RC-375060 Screw Machine Tool - Cut Off - Brazed, 060" Width, 180" Proj, 3/8" Square Shank, 6" OAL, Uncoated - Product Features
- Designed for cut off applications; RC for right hand and LC for left hand
- Solid carbide tipped with zinc coated steel shank for durability and corrosion resistance
- Available in industry standard fractional shank sizes
- Ground in the USA
Micro 100 SEM-187-02X Square End Mill, 3/16" Cutter Dia, 3/8" LOC, 2 Fl, 3/16" Shank Dia, 1-1/2" OAL, AlTiN - Product Features
- Long flutes for deep pocket milling and long length peripheral milling
- 30 deg helix
- Center cutting
- Square profile
- AlTiN coating option for added lubricity and increased wear resistance in difficult-to-machine materials
Micro 100 SEM-500-03X Square End Mill, 1/2" Cutter Dia, 5/8" LOC, 3 Fl, 1/2" Shank Dia, 2-1/2" OAL, AlTiN - Product Features
- Long flutes for deep pocket milling and long length peripheral milling
- 30 degree helix
- Center cutting
- Square profile
- AlTiN coating option for added lubricity and increased wear resistance in difficult-to-machine materials
Micro 100 T-111 Cut Off Tool - T Style - Regular - Brazed, 1/8" Width, 3/4" Length, 7/8" Square Shank Height, 6" OAL, Uncoated - Product Features
- Double end \" T\" style cut-off tool that is parallel ground to help achieve a straighter cut
- Tops are hollow ground to help curl the chip to center for better evacuation
- Hardened and precision ground steel blades
- Solid carbide tipped with zinc coated hardened steel shank
- Ground in the USA
Micro 100 E-8 Threading Tool - E Style - Brazed, 1/2" Width, 568" Length, 1/2" Square Shank, 3-1/2" OAL, Uncoated - Product Features
- Designed for outside diameter (OD) general purpose threading
- Neutral design allows for right and left hand threading applications
- Solid carbide tipped with zinc coated steel shank for durability and corrosion resistance
- Available in industry standard fractional shank sizes
- Ground in the USA