Cutting Tools By uxcell

• Forstner Drill Bits: Drilling diameter: 80mm / 3.15\"; shank size: 9mm / 0.35\"; drilling depth: 52mm / 2.05\"; total length: 85mm / 3.35\". Thickened and sharp carbide tip, high strength and hardness high carbon steel body, hex shank forstner bits for woodworking.
• Applications: Can be used for drilling holes on wood and plastic products, furniture, door hinge. Used on cutting wood, plywood, solid wood boards, MDF, plastics, fiberglass etc.. Forstner drill bit is for ordinary purpose
• Features: Tungsten carbide cutting tip with special heat treatment for sharp cutting edge, high hardness, non-burrs and durable use. Arc curve design head for easy chip-removal, more efficient perforation
• How To Use: Suitable for bench drill, vertical drilling machine, CNC carving machine. Processing hardwood or other hard materials should be injected with water to improve the quality and accuracy of drilling, and extend the life of the hole opener.
• Tips: Maximum speed: 1200rpm. Used on desktop (fixed) equipment, and can NOT be used on handheld power tools (such as hand drill or electric drill). Can not drill metal and non-ferrous metal. To avoid causing damage, be sure no nails or other metal objects in wood before drilling. The cutting edge and tip of the opener should be sharpened in time.

• Specifications: Cutting dia.: 1.5mm / 0.06\"; tool flute length: 13mm / 0.51\"; overall length: 42mm / 1.65\"; accuracy: D4. High-speed steel tool with cobalt is good for general purpose applications
• Uncoated Tool: Features just the base substrate without any additional treatment or coatings. Heat treated and quenched for stable performance, suitable for wide ranges of applications
• Round Shank: Can be used with a wide variety of tool holding systems. Good for use in through or blind holes and used for light cut, repair work, removing stock
• Features: Straight flute tool allows chips to collect in the flutes when cutting, well suited for most applications in shallow cuts. Reamer is with high hardness, toughness, wear resistance, long service life
• Application: Designed for accurate reaming in stainless steel, alloy steel and other metal materials, used on equipment including screw machines, turret lathes, drill presses and machining centers

• Twist Drill Bits: Drilling Diameter: 7mm / 0.276\"; Flute Length: 35mm / 1.38\"; Overall Length: 60mm / 2.36\"; Cutting Hardness (Max.): HRC45. Spiral chip space design for fast and clean chip removal. Sharp cutting edge provides smooth cutting and no glitches.
• Wide Applications: Widely used for drilling non-ferrous metal, cast iron, stainless steel, aluminum, copper, alloy steel, plastic, wood. Designed with the base substrate without any additional coatings, suitable for wide ranges of applications.
• Material: Constructed from medium grain C2/K20 tungsten carbide, the drill bit has good toughness, high hardness (HRA89) and wear resistance. With good milling and cutting performance, can ensure high work efficiency. Carbide tool offers faster cutting speeds than other substrates.
• Features: Spiral chip space design for fast and clean chip removal. Sharp cutting edge provides smooth cutting and no glitches. Suitable lubricant is conducive to cutting or cooling, making cutting easier, improving smoothness and dimensional accuracy.
• Tips: Used on machining centers, CNC lathes. The longer the length of the tool clamped by the chuck, the better. If the clamping length is shorter, you need to lower the feed rate and cutting speed to reduce vibration and extend the tool life.

• Chisel Side Width: 9/16 inch / 14mm; Chisel Drilling Depth: 75mm / 2.9 inch; Total Length: 210mm / 8.3 inches.
• The best designed Drilling Point tip and 4 Cutting Corner to enable the fast drilling and penetrating into working pieces of wood very smooth and fast.
• It will get double effect by matched use with mortise and tenon machine. The square hole punching needs to use electric drill, hammer and other tools.
• With long drill core and square chisel, easy to lock the hole on the wood, can reduce labor intensity of construction workers, speed up the construction speed, reduce construction costs.
• Used with mortise and tenon machine with double effect, and electric drill, hammer and other tools is required for punching square hole in wood.

• Tap Size: 1/4-20 UNC thread, H2 thread tolerance grade. Spiral flute design, upward chip removal. Right hand thread cutting, clear threads, fast tapping with accuracy.
• Material and Finish: High speed steel tool is with high hardness and toughness, heat resistance and wear resistance. Features the base substrate without any coatings. Suitable for general purpose thread tapping.
• Applications: Suitable for processing blind holes and sticky materials. Great for drilling and tapping aluminum, die steel, stainless steel, bronze, hard plastics, etc.
• Easy to Use: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps.
• Tips: Machine taps are suggested to be used with tap collets with overload protection. Hand use is easy to cause breakage to the tap due to uneven force.

• Combination Drill and Tap Bit: Thread Size: M6 x 1; Hex Shank Size: 1/4\". Combination drill and tap bit set can complete hole drilling, tapping, deburring and countersinking. One-step operation greatly saves processing steps and improves working efficiency.
• Wide Applications: Suitable for processing blind holes. Used for tapping aluminum, die steel, stainless steel, bronze, hard plastics, etc.. Recommended feed rate: general steel: 6-15m/min; harder steel: 5-10m/min; stainless steel: 2-7m/min; cast iron: 8-10m/min.
• Features: Self-centering point, do not need assistant center drilling or center punching. Quick change 1/4-inch hex shank can be used on power tools more easily and securely. A tapered end on hex shank can prevent excessive tapping.
• Titanium Coating: Titanium coating provides excellent corrosion resistance, greatly improves wear resistance and hardness, and reduces the coefficient of friction. High speed steel tool has high hardness and toughness, wear resistance and heat resistance.
• Tips: Use on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps. Machine taps are suggested to be used with tap collets with overload protection.

• Combination Drill and Tap Bit: Thread Size: M8 x 1.25; Hex Shank Size: 1/4\". Combination drill and tap bit set can complete hole drilling, tapping, deburring and countersinking. One-step operation greatly saves processing steps and improves working efficiency.
• Wide Applications: Suitable for processing blind holes. Used for tapping aluminum, die steel, stainless steel, bronze, hard plastics, etc.. Recommended feed rate: general steel: 6-15m/min; harder steel: 5-10m/min; stainless steel: 2-7m/min; cast iron: 8-10m/min.
• Features: Self-centering point, do not need assistant center drilling or center punching. Quick change 1/4-inch hex shank can be used on power tools more easily and securely. A tapered end on hex shank can prevent excessive tapping.
• Coating: Features just the base substrate without any coatings, good for most general purpose thread tapping. High speed steel tool has high hardness and toughness, wear resistance and heat resistance.
• Tips: Use on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps. Machine taps are suggested to be used with tap collets with overload protection.

• Chucking Reamer: Size: 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm; tolerance: H8. Features just the base substrate without any additional coatings, good for wide ranges of applications
• Material: High-speed steel tools are with combination of hardness and toughness for wear resistance, suitable for general purpose applications
• Applications: Cut and remove the thin layer metal on hole surface that has been processed, mainly to improve the precision of holes and reduce the surface roughness
• Features: Straight flute tools allow chips to collect in the flutes and can make shallow cuts in most applications
• How to Use: Chucking reamers (machine reamers) are used on lathes, drill presses and screw machines. Designed for accurate reaming in stainless steel, aluminum, copper, alloy, plastic

• Tap Size: M3 x 0.5, M4 x 0.7, M5 x 0.8, M6 x 1, M8 x 1.25. Spiral flute design, upward chip removal. Right hand thread cutting, clear threads without burrs, fast tapping with accuracy.
• Material & Coating: High-speed steel taps features high hardness and toughness, good for general purpose applications. Titanium coating is for capability, durability, wear-resistance, and long service life.
• Applications: Suitable for processing blind holes and sticky materials. Suitable for drilling and tapping aluminum, die steel, stainless steel, bronze, hard plastics, etc.
• Easy to Use: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps.
• Tips: Machine taps are suggested to be used with tap collets with overload protection. Hand use is easy to cause damage to the tap due to uneven force.

• Round Die: Thread size: M8 X 1; outside diameter (OD): 25mm / 1.0\"; Thickness: 7mm / 0.28\"; accuracy class: 6g. Made of tool steel, hardness and wear-resistance.
• Application: Round dies are suitable for general purpose threading. Can process, correct or clean the external threads. Ideal for maintenance and repair work.
• Features: Conical locking hole, strong locking and not loose. Perfect for re-threading existing threads in hard materials like metal and making new threads in soft material such as plastic.
• Easy To Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened.
• Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread.

• 1/8 Inch CNC Bits: Shank Diameter: 3.175mm / 1/8\"; Cutting Diameter: 3.0mm / 0.12\"; Cutting Length: 12mm / 0.47\"; Overall Length: 38mm / 1.5\"; Number of Flutes: 2 Flutes
• Wide Applications: CNC router bits are suitable for Acrylic, PVC, Wood, Nylon, Resin, ABS, MDF, Plywood, Hardwood. Good for 2D sculpturing, cutting, engraving, slotting, milling, etc. Works with milling and engraving machines.
• Spiral & Sharp Router Bits: Large chip space design for fast and clean chip removal. Spiral sharp cutting edges provide smooth cuts and no burrs for increased efficiency, not easy to stick, precision ground.
• Carbide End Mills: Tungsten carbide has good wear resistance, high strength and resistance to cutting temperatures. Carbide can run at higher speed than high-speed steel. Chamfered shank for ease of use
• Tips: Upcut milling bits can direct chips up and away from the milling area, leaving an unobstructed path to prevent tool breakage and extends the tool life. Properly reduce the cutting speed and feed rate to prolong the service life.

• Specifications: Shank diameter: 3mm(1/8\"), cutting edge diameter: 2mm. Fits most rotary die grinders
• Long Working Life: Made of heat-treated tungsten carbide that hardness can be up to above HRA85, sharp and sturdy, long service life
• Single Cut Design: Single groove rotary files are more suitable for the object density is relatively high, such as alloy steel, stainless steel, hardened steel
• Versatile Use: Widely used for metalwork, tool making, model engineering, wood carving, jewelry making,welding, chamfering, casting, deburring, grinding, sculpting
• Tips: Requirement of the carbide burrs rotating speed is: 4000-50000 rpm. Always ensure your burrs shank is well inserted into your collet and clamped down tightly

• Round Die: Thread size: M10 X 1.25; outside diameter (OD): 30mm / 1.2\"; Thickness: 11mm / 0.43\"; accuracy class: 6g; fine grinding. Made of alloy steel, hardness, high torque, good toughness and wear-resistance for long service life.
• Applications: Can process, correct or clean the external threads. Suitable for general purpose threading in stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic, etc.. Great for maintenance and repair work on pipes, boards and machinery.
• Features: Conical locking hole, strong locking and not loose. Perfect for re-threading existing threads in hard materials like metal and making new threads in soft material such as plastic. The surface is lubricated with grease to prevent rust, the thread is clear and easy to repair.
• Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened. The end of the bar should be chamfered 1*45 degree, and the chamfer is too large to cut in.
• Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. The bar diameter should be smaller ( about 0.05mm-0.15mm) than the nominal diameter of the required thread. Excessive diameter can easily cause difficult cutting and lead to damage to the die teeth.

• Color: Black; Weight: 9g
• Package Content: 20Pcs x O-Ring
• Material: NBR
• Width: 2mm/0.08
• Inside Diameter: 30mm/1.18

• Product Name : IDC Pin Header;Model : DC3-2P;Position : 3
• Pins : 6;Row : 2;Mounting Angle : Straight Type
• Pin Pitch : 2.54mm/0.1\";Total Size : 15 x 9 x 12mm/ 0.6\" x 0.35\" x 0.47\" ( L*W*H)
• Material : Plastic, Metal;Color : Black, Silver Tone
• Net Weight : 30g;Package Content : 30 x IDC Pin Headers

Popular Categories on BuyBestBrands.in