Robotics By REES52

• Application areas: remote control helicopters,micro robots,robotic arms,boats,etc.
• Interface Type: compatible with JR & Futaba interface.
• Operating Speed: 0.12sec/60 degree(4.8V)~0.1sec/60 degree(6.0V).
• Dead band width: 5 ?s, Operating Voltage : 4.8V~6.0V.
• Package Content: 2 Pcs SG90 9G servo motor.

• MQ Gas Sensors compatible ARDUIN0 UN0 / ESP32 / MQTT / Raspberry PI
• MQ2 is one of the commonly used gas sensors in MQ sensor series. It is a Metal Oxide Semiconductor (MOS) type Gas Sensor also known as Chemiresistors
• Gas sensors are employed in factories and manufacturing facilities to identify gas leaks, and to detect smoke and carbon monoxide in homes
• Commonly used to detect toxic or explosive gasses and measure gas concentration
• Package INCLUDED : 1 x MQ-7 - Carbon Monoxide

• BMP180 is a high-precision, small size, ultra-low power pressure sensor that can be used in mobile devices
• Its performance excellence, the absolute accuracy of the lowest can reach 0.03hPa, and low power consumption, only 3?A
• BMP180 powerful 8-pin ceramic leadless chip carrier (LCC) ultra-thin package, you can directly through the I2C bus connected with a variety of microprocessors
• Pressure range: 300 ~ 1100hPa (9000 meters above sea level ~ -500 meters)
• Low power consumption: 5?A in standard mode

• Working Voltage: 5V(DC)
• Static Current: Less than 2mA
• Output Signal: Electric frequency signal, high level 5V, low level 0V
• Sensor Angle: Not more than 15 degrees
• Detection Distance: 2 cm to 450 cm

• Material:Other, Color:White
• Package Contents:1 Set of Supplies & Accessories
• InvenSense MPU-6050 with MEMS accelerometer and MEMS gyro\";3 Axis Accelerometer, 3 Axis Gyrometer\";Hooks up with Arduino Board and Other Maker Kits\";I2C Based communication with the development board\";;;;;;

• Operating speed: 0.12second/ 60degree ( 4.8V no load)
• Stall Torque (4.8V): 17.5oz /in (1kg/cm)
• Operating voltage: 3.0V~7.2V
• Temperature range: -30 to +60
• Dead band width: 7usec

• Use plug-in full-color LED
• RGB tricolor limiting resistor to prevent burn
• Three primary colors can be mixed to get different colors by adjusting the PWM
• Can interface with a variety of microcontrollers
• Operating voltage: 5V

• Adopted of high quality electronic components, and precision process, ensure for the durability.
• Support all MCU control,PLC control and smart home control.
• Applicable for automatic control switch.
• 100% brand new and high quality.
• Safe and reliable, suitable for industrial applications.

• Power supply :3-5v (internal low dropout regulator), Pin pitch 2.54mm
• Communication modes: standard IIC communications protocol
• Chip built-in 16bit AD converter, 16-bit data output
• Gyroscope range: ? 250 500 1000 2000 degree / s, Acceleration range: ? 2 ? 4 ? 8 ? 16g
• Package content: 3 x MPU-6050 3 Axis Accelerometer Gyroscope Sensor Module

• Specification Input voltage: 6.5-12v (DC) or USB power supply(5V), output voltage: 3.3V, 5V, maximum output current: < 700mA
• Application This kit is suitable for SCM power expansion, electronic building blocks, intelligent car, Arduino robot, etc.
• Universal The breadboard wires accept resistors, capacitors, transistors, diodes, LEDS, pots and most all other types of components
• Easy to install No welding and tool required, convenient for experiment and DIY projects
• Assorted Lengths Wires 4 lengths of male to male breadboard jumper wires: 12cm, 16cm, 20cm, 25cm

• Easy to assemble -The mechanical structure is simple and it is very easy to install. Paper assembly instructions will be provided, please see the assembly video: Please get the video link from the product description.
• The motor has anti-interference function - This car is equipped with four drives, full of horsepower. The DC motor has flexible curves and good directivity. They are all anti-interference (over EMC detection) strong magnetic motors. The characteristics of strong magnetic motors are that the torque is greater than that of ordinary motors, and the speed is fast. It is very suitable for tracking and obstacle avoidance. It will not affect other circuits on the car, and it is highly reliable
• Multiple holes are reserved on the acrylic plate -The chassis is large and sturdy and easily expandable. The car has reserved holes for sensors such as Arduino UNO, 2009, MEGA2560, MEGA1280, 51 microcontroller control board, drive module, tracking module and obstacle avoidance photoelectric switch, which is convenient for you to assemble and expand
• Upgraded ! -The car tires have been fully upgraded, the quality has been improved, and the tire texture is full, so that the car will run stably. It is very suitable for customers who have requirements on the quality of the car. The picture shows the comparison between the new and old tires
• It comes with a tachometer encoder-allowing you to better control the displacement of this car

• Solderless Breadboard
• Terminal Strips 630PTS
• Distribution Strips 200pts
• ABS housing
• Completely reusable

• Newest 6 channel 2.4GHz system
• The large backlit LCD screen with large fonts
• A super active and passive anti-jamming capability

• 100% brand new and high quality Solderless 1660 Breadboard Super Kit.
• 1660 Test Points In Total(including 2 terminal strips 1260 tie-point and 4 bus strips 400 tie-point)&3 Binding Posts.
• ABS Plastic Housing, Aluminum Back Plate,Metal Contact Clips; Accept Wire With Diameter 20-29AWG.
• Binding Posts Coded Black, Red and Green, Coloured Coordinates for Easy Component Placement
• Prototyping made easy:A reusable construction base for prototyping of electronics.Also commonly referred to as a plugboard or terminal array board.

• INSTRUCTIONS -- wide DC power supply voltage from 6V to 30V, On/off delay timer module support micro USB 5.0V power supply, very convenient and practical for your use.
• FEATURE -- the timer regulable supports reverse input protection, and there is a STOP button for emergency stop function
• ADVANTAGE -- delay relay switch added sleep mode, it will automatically turn off display if no operation in 5 minutes after enabled, and you can press any button to wake it up
• PARAMETERS SAVE SEPARATELY -- you can set different OP, CL, LOP parameters, these parameters were independent of each other and saved respectively.
• LOAD CAPACITY -- DC 30V 5A, AC 220V 5A;Operating Temperature: -40~85.

Popular Categories on BuyBestBrands.in