Robotics By INVENTO

• Outer diameter: 10 MM; Thickness: 3 MM
• Rated voltage: 1V To 6V,; Current: 66 MA
• Output Speed: 12000 RPM
• Cable Length: 2cm/ 0.79in
• Package Include 2 x Round Vibration Motor

• All the discs are made from selected copper, ensuring excellent conductivity and long-lasting use.
• 12mm brass outer diameter plate and ceramic inner diameter plate. Piezoelectric buzzer film. Can be fitted to used acoustic guitars, CBGs, drums, etc.
• Excellent accessory for acoustic instrument pickups, stomp boxes, contact mics, etc.
• Great for acoustic instrument pickups, stomp boxes, contact mics, etc.
• Package Include 15 x Piezo Sensor

• Size: 250x250x3 mm (LxBxH); Thickness: 3mm
• Material - Aluminium Alloy; Weight - 350 Grams
• There is a hole of 2mm on one corner of plate made in process of anodising of plates for surface finish. Plates may get little bend during transit.
• Plates surface finish may or may not be exactly same as shown in picture.
• Package Include 1 x 3mm Aluminium Sheet

• All the discs are made from selected copper, ensuring excellent conductivity and long-lasting use.
• 12mm brass outer diameter plate and ceramic inner diameter plate. Piezoelectric buzzer film. Can be fitted to used acoustic guitars, CBGs, drums, etc.
• Excellent accessory for acoustic instrument pickups, stomp boxes, contact mics, etc.
• Great for acoustic instrument pickups, stomp boxes, contact mics, etc.
• Package Include 5 x Piezo Sensor

• The TSOP1838 or VS1838 is a miniaturized receivers for infrared remote control systems. PIN diode and pre-amplifier are assembled on lead frame, the epoxy package is designed as IR filter. The demodulated output signal can directly be decoded by a microprocessor.
• TSOP1838/VS1838 is the standard IR remote control receiver series, supporting all major transmission codes. TSOP1838 is sensitive to 38 KHz frequency.
• They have band pass filter inbuilt so ambient light will not cause any harm and this sensor will react only at 38 KHz infrared signal. TSOP1838/VS1838 is an improved version of popular IR Receiver TSOP1738 and can be directly replaced with this new IR receiver.
• Wide operating voltage range: 2.7V to 5.5VDC; Infrared receiver; Frequency: 38KHz; Receiving distance L L5IR = 300MA (test signal) - 10 to 15 Meters
• Package Include 5 x TSOP 1838

• Outer Diameter: 27mm (24T), 55mm (50T)
• No. of teeth: 24, 50
• Compatible shaft size: 6mm
• Thickness (Teeth Portion): 6.5mm
• Package Include 2 x 24 Teeth Spur Gear, 2 x 50 Teeth Spur Gear

• Outside Diameter: 4mm
• Length: 100 mm (0.1 meter)
• Material: EN-31 (Hard Chromed)
• Application: 3D Printer, CNC, Robotics, DIY Projects, Machines etc
• Package Include 2 x 100mm long Smooth Rod

• Model - RS 365-PH - Dual Shaft
• RPM : 1900 - 8500 rpm (Max); Output Power- 0.7W - 35 Watt Approx
• Current : 1 Amp (Max); Operating Voltage : 6V - 24V DC; Torque- 69 - 411 (g-cm)
• Output Shaft Diameter - 2.3mm; Length - 11mm
• Motor Weight- 62 Grams; Outside Diameter- 29mm; Length - 32mm
• Voltage:6V No-load current:50mA; Stall current:0.38A; No-load speed:1900RPM
• Voltage:12V; No-load current:60mA; Stall current:0.75A; No-load speed:3950RPM
• Voltage:18V; No-load current:60mA; Stall current:1.00A; No-load speed:6100RPM
• Voltage:24V; No-load current:60mA; Stall current:1.40A; No-load speed:8500RPM
• Package Include 2 x RS365PH DC Motor

• Material: Polyvinyl chloride (PVC); Size(approx.): 85.5 x 54 x 0.8mm
• Operating frequency: 13.56 MHz; Capacity: 1KB=8KBYT=1024BITE;
• Read Range:3-10cm ( be related to the card reader); Data Transmission Speed: 106 Kboud
• Rewitable: > 100,000 times; Data Retention: > 10 years; Applications: Increasingly used in identity authentication, banking, telecom, public transport, car management, etc.
• Package Include: 20 x RFID Card

• Outside Diameter: 5mm
• Length: 150 mm (0.15 meter)
• Material: EN-31 (Hard Chromed)
• Application: 3D Printer, CNC, Robotics, DIY Projects, Machines etc
• Package Include 2 x 150mm long Smooth Rod

• Outside Diameter: 5mm
• Length: 400 mm (0.4 meter)
• Material: EN-31 (Hard Chromed)
• Qty: 2pcs
• Application: 3D Printer, CNC, Robotics, DIY Projects etc

• Operating voltage 5V
• Power 5Mw
• Wavelength 650n m
• This 5V laser head very easy to use, you can use UNO control, do controllable laser pointer, theft detection, etc. interesting application devices. Whenever the laser can not point to themselves or others eyes, even if the case is closed the laser will have to open the possibility of error.
• the laser is not a toy, do not give children, mental insufficiency, for people who do not understand the use of the laser characteristics, in this case, can easily lead to injury. the use of lasers should wear special goggles, for the invisible laser, this point is particularly important. the laser can not shine in vehicles, aircraft and other transport vehicles someone.

• Outside Diameter: 6mm
• Length: 400 mm (0.4 meter)
• Material: EN-31 (Hard Chromed)
• Qty: 2pcs
• Application: 3D Printer, CNC, Robotics, DIY Projects etc

• Voltage : 3-6 V
• Torque : 4 Kg-cm
• Step Angle: 1.8 deg / step
• Shaft Diameter: 5mm; Shaft Length: 10mm
• Package Include 1 x Nema 17 Stepper Motor

• Model: 6804zz
• Bearing Inner Diameter: 20mm
• Bearing Outside Diameter: 32mm
• Bearing Thicknesss: 7mm
• Quantity: 2pcs

• A DC Gear motor clamp or a bracket is used to mount the motor tightly on any solid surface. Thus it increases the usability of the motor & makes motor mounting very convenient. This clamp or mount bracket is designed for DC Geared Motors. This clamp or mount bracket is designed for DC Geared Motors.
• Material: MS steel; Thickness: 1.2mm thick.
• Motor mounting side Height 42 mm, width 40 mm; Bracket mounting side Height 22 mm, width 40 mm.
• Hole for Motor mounting: 1- 15mm diameter; Holes for chassis mounting: 6 3mm diameter each.
• Package Include 2 x Motor Clamp (Motor Not Included as shown in Picture)

Popular Categories on BuyBestBrands.in