Robotics By INVENTO

• Model: PHS20-R
• Threads Size: Metric M20
• Threads Pitch: 1.5mm
• Threads Direction: Right Hand Side
• Bearing Inner Diameter: 20mm

• Winding - 100% Copper; Step Down - Converts 220V AC to 12V AC; Type - 12-0-12; AC to AC Converter
• Input - 220V AC; Weight - 360 Grams; Size: 60x25x50mm (LBH); Mounting Hole - 3.5 x 7.5mm; Centre Distance - 69.5mm
• Output - 12V AC; Ampere - 1A; Step Down Centre Tapped Transformer
• Used for variety of applications like Projects , Object counters , Obsticle detector , Sensor circuits , Fire alarms etc
• Package Include: 1 x 12V 1A 12-0-12 Transformer

• Material: Polyvinyl chloride (PVC); Size(approx.): 85.5 x 54 x 0.8mm
• Operating frequency: 13.56 MHz; Capacity: 1KB=8KBYT=1024BITE;
• Read Range:3-10cm ( be related to the card reader); Data Transmission Speed: 106 Kboud
• Rewitable: > 100,000 times; Data Retention: > 10 years; Applications: Increasingly used in identity authentication, banking, telecom, public transport, car management, etc.
• Package Include: 8 x RFID Card

• Nut Material: Brass; Thread Type: M6 Metric Thread; Pitch: 1mm; Inside Diameter: 6mm
• Rod Length: 400 mm (0.4 meter); Pitch - 1 mm; Material: SS 304 (Stainless Steel)
• Note: Threads are Metric M6, not 6mm TR6 Lead Screw. Please contact us before order for any doubt.
• Application: 3D Printer, CNC, Robotics, DIY Projects etc
• Package Include: 2 x M6 T-Nut, 2 x 400mm M6 Threaded Rod

• Outside Diameter: 10mm
• Length: 600 mm (0.6 meter)
• Material: EN-31 (Hard Chromed)
• Qty: 2pcs
• Application: 3D Printer, CNC, Robotics, DIY Projects etc

• Worm Gear - Outer Diameter: 25mm; No. of teeth: 6; Teeth Type: Spiral; Gear Total Length: 70mm; Length (Teeth Portion): 50mm; Pitch: 8mm
• Gear Details: Outer Diameter: 30mm; No. of teeth: 10; Thickness (Teeth Portion): 10mm; Teeth Type: Straight Teeth
• Compatible shaft size: 6mm; Module: 2.5; Hub Diameter: 20mm; Check picture for exact dimensions
• Note: Gear is 3D Printed with 100% infill. Gear is solid from inside and can take considerable load. As gear is 3D Printed there is some marks over its surface. Color of Gear may be changed from picture. If you have any specific color requirement please contact us before ordering.
• Package Include 1 x Worm Spur Gear, 1 x 10 Teeth Gear; For Gear Matching both gear must be of same module.

• These devices consist of two independent, high-gain, frequency-compensated operational amplifiers designed to operate from a single supply over a wide range of voltages
• Operation from split supplies also is possible if the difference between the two supplies is 3 V to 32 V, and VCC is at least 1.5 V more positive than the input common-mode voltage.
• pplications include transducer amplifiers, dc amplification blocks, and all the conventional operational amplifier circuits that now can be implemented more easily in single-supply-voltage systems.
• For example, these devices can be operated directly from the standard 5-V supply used in digital systems and easily provide the required interface electronics without additional 5-V supplies.
• Package Include 2 x LM358 IC

• Overcharge detection voltage: 3.75V?0.25V; Overcharge release voltage: 3.45V?0.25V
• Over discharge detection voltage: 2.1V?0.05V
• Maximum Working Current: 12A; Overcurrent detection current: 17A
• No of cells compatible with: 1; Suitable for: 18650 Li-Ion battery; Size - 40x12x3.5mm (LxBxH)
• Package contains: 2 x 1S 12A BMS Li-Ion Battery Protection Board

• The CD4011UBE is a CMOS quad 2-input NAND Gate. The device provides the system designer with direct implementation of the NAND function and supplements the existing family of CMOS gates. The device features standardized symmetrical output characteristics.
• 30ns Propagation delay time; 5V, 10V and 15V Parametric ratings; Maximum input current of 1?A at 18V.
• Logic Family / Base Number: CD4011; Logic Type: NAND; Output Current: 6.8mA; No. of Inputs: 2; Supply Voltage Min: 3V.
• Supply Voltage Max: 18V; No. of Pins: 14Pins; Logic IC Family: CD4000; Logic IC Base Number: 4011.
• Package Include 5 x 4011 IC

• Outside Diameter: 5mm
• Length: 100 mm (0.1 meter)
• Material: EN-31 (Hard Chromed)
• Application: 3D Printer, CNC, Robotics, DIY Projects, Machines etc
• Package Include 2 x 100mm long Smooth Rod

• Outside Diameter : 8mm, Inside Diameter : 6mm
• Use range: Pneumatic pneumatic tools, Instruments, mechanical gas pipeline, Laboratory automation equipment, General industrial water and gardening
• Working pressure: 15 bar
• Working temperature range: 0?C to 80?C
• Color : Blue
• Package Content : 5 meter Length PU Tube

• Cable length: 0.5 meter
• 6pin XH2.54 Female to 4 Pin Dupont Female cable
• One end is 4pin DuPont connector head, another end is 6pin XH2.54 white terminal
• Suitable for NEMA 17 Motor
• NOTE: Wire colour can be different as shown in picture. Wire will be supplied as per stock availability. if you have specific colour requirement please confirm with us before placing order.

• Outer Diameter: 40mm
• Compatible shaft size: 6mm
• Thickness (Teeth Portion): 6.5mm
• Package Include 4 x Spur Gear

• Size: Metric M3
• Package Include 40 x M3 nuts

• Single direction thrust ball bearings consist of a shaft washer, a housing washer and a ball and cage thrust assembly. The bearings are separable so that mounting is simple as the washers and the ball and cage assembly can be mounted separately
• Bearing ID: 12mm, OD: 26mm; Height: 9mm
• Single direction thrust ball bearings, as their name suggests, can accommodate axial loads in one direction and thus locate a shaft axially in one direction. They must not be subjected to any radial load.
• Basic load ratings: Dynamic: 10.4 kN, Static: 15.4 kN; Speed ratings: Reference speed: 6700 r/min, Limiting speed 10000 r/min
• Package include: 2 x 51101 Axial Thrust Bearing

• The ADXL345 is a small, thin, ultra-low power 3-axis accelerometer with high resolution (13 bits) and measurement range of ? 16g.
• The digital output data is in 16-bit twos complement format and is accessible via SPI (3-wire or 4-wire) or I2C digital interface. Its high resolution (3.9 mg / LSB) enables measurement of tilt angle changes of less than 1.0 degree
• Low-power mode supports motion-based intelligent power management for threshold sensing and motion acceleration measurement with very low power consumption.
• The ADXL345 is perfect for mobile device applications. It measures static gravitational acceleration in tilt detection applications as well as dynamic acceleration due to motion or impact.
• Package Include: 1 x ADXL 345

Popular Categories on BuyBestBrands.in