Deep Fat Fryers By e-INFINITY

• 433 mhz rf 1/2/3/4 channel as per order transmitter n receiver learning code 1527 and dc 12v relay receiver module mini diy light garage gate switch s3: multi
• Product has a quantity of 1 unit 1/2/3/4+1)Imported product 1 four channel rf remote controller and 1/2/3/4 pcs of 433mha receiver relay for controlling 1/2/3/4 ( As per Your Order)diffterent remote switching operartins Like, Fan, light, Garage Door, Curtain, Gate,
• with 6 types of Programming, Including 3 delay timer off at 5sec/10sec/15sec after push, Push to on and push to off, push to on hold and off on relese,Not Available 4 ch Compact Relay , Only on Seaparate Realy
• Blue protective cover is not Permanebt, It may arrive without protective cover or without protective cover, we dont accept return if blue cover slightly worn or tear or without cover

• 433 mhz rf 1/2/3/4 channel as per order transmitter n receiver learning code 1527 and dc 12v relay receiver module mini diy light garage gate switch s3: multi
• Product has a quantity of 1 unit 1/2/3/4+1)Imported product 1 four channel rf remote controller and 1/2/3/4 pcs of 433mha receiver relay for controlling 1/2/3/4 ( As per Your Order)diffterent remote switching operartins Like, Fan, light, Garage Door, Curtain, Gate,
• with 6 types of Programming, Including 3 delay timer off at 5sec/10sec/15sec after push, Push to on and push to off, push to on hold and off on relese,Not Available 4 ch Compact Relay , Only on Seaparate Realy
• Blue protective cover is not Permanebt, It may arrive without protective cover or without protective cover, we dont accept return if blue cover slightly worn or tear or without cover

• 1/2/3 USB 5V 1A Mobile Power Bank Charger Controller Module Step Up Boost Power Module Lithium Battery Charging Board LED Electronic Components Electronic Hobby Kit
• Colour Green Connector Type USB Voltage 5 Volts Battery Capacity 50000 Milliamp Hours
• Apply Battery Type: 18650 battery(not include) Output Voltage: 5V 2.1A Input Voltage: 5V 1A Instructions: Level 4 Capacity indicator Lighting: with LED lights Rated Voltage: 3.7V ( Suit for 3.2V-4.2V. The batteries are in parallel)

• 433 mhz rf 1/2/3/4 channel as per order transmitter n receiver learning code 1527 and dc 12v relay receiver module mini diy light garage gate switch s3: multi
• Product has a quantity of 1 unit 1/2/3/4+1)Imported product 1 four channel rf remote controller and 1/2/3/4 pcs of 433mha receiver relay for controlling 1/2/3/4 ( As per Your Order)diffterent remote switching operartins Like, Fan, light, Garage Door, Curtain, Gate,
• with 6 types of Programming, Including 3 delay timer off at 5sec/10sec/15sec after push, Push to on and push to off, push to on hold and off on relese,Not Available 4 ch Compact Relay , Only on Seaparate Realy
• Blue protective cover is not Permanebt, It may arrive without protective cover or without protective cover, we dont accept return if blue cover slightly worn or tear or without cover

• 1/2/3 USB 5V 1A Mobile Power Bank Charger Controller Module Step Up Boost Power Module Lithium Battery Charging Board LED Electronic Components Electronic Hobby Kit
• Colour Green Connector Type USB Voltage 5 Volts Battery Capacity 50000 Milliamp Hours
• Apply Battery Type: 18650 battery(not include) Output Voltage: 5V 2.1A Input Voltage: 5V 1A Instructions: Level 4 Capacity indicator Lighting: with LED lights Rated Voltage: 3.7V ( Suit for 3.2V-4.2V. The batteries are in parallel)

• 1/2/3 USB 5V 1A Mobile Power Bank Charger Controller Module Step Up Boost Power Module Lithium Battery Charging Board LED Electronic Components Electronic Hobby Kit
• Colour Green Connector Type USB Voltage 5 Volts Battery Capacity 50000 Milliamp Hours
• Apply Battery Type: 18650 battery(not include) Output Voltage: 5V 2.1A Input Voltage: 5V 1A Instructions: Level 4 Capacity indicator Lighting: with LED lights Rated Voltage: 3.7V ( Suit for 3.2V-4.2V. The batteries are in parallel)

• Specificaiton: 100% brand new and high quality Fitment: Universal fit for all CAR SUV Pickup Off-road (For reference)
• Material: Iron Size (approx.): Single inner diameter: 0.8-1.4mm, Double inner diameter: 2-6mm Color: as picture shown Package included: 18pcs x Electrical Terminal Wiring Crimp Connector Pin Removal Key Tool Kit Note: Please allow 1-10mm difference due to manual measurement. Due to light and screen difference, the item's color may be slightly different from the pictures.
• with a small Tiny Screwdriver and Flexible and handy and Very Useful Screw /Tools Grab Tools

• Product Details: Minimum Order Quantity50 Piece Screw TypeSELF TAPPING Thread TypeSelf Tapping MaterialStainless Steel ColorSELF FinishPassivated Packaging TypeBox Head TypeCountersunk Din IsoDIN 7973
• Hardened self tapping Sheet metal Screw
• AB type PAn Head 6.5 mm no 4 screw
• ideal for metal sheet , wood , pvc , P.C.B PCB school and college projects, electronic projest , devices

• Quality Assured 100 Brand New , e-INFINITY quality Chk Processed It is an excellent and convenient multifunction device for controlling temperature in Aquariums, The stability of aquarium temperature is one of the crucial factors that contributes to the health and safety of your fish. By utilizing the temperature controller, you can provide an environment with optimal temperature for your fish. The AC 110-220V STC-1000 temperature controller can measure and control temperature from -50 to 110 ?C
• Parameters: Temperature Measuring Range: -50?C~110?C Control temperature range: -50?C~110?C (adjustable) Control temperature difference: 0.3?C~10?C (adjustable) Resolution: 0.1?C
• Accuracy: ? 1?C (-50?C~70?C) Sensor: 1M NTC Sensor Sensor error delay: 1 minute Relay contact capacity (Heating): 10A (max) 250 V Relay contact capacity (Cooling): 10 A (max) 250 V Compressor delay protection time: 1~10 minutes (adjustable)
• Operating Temperature: 0?C~60?C Storage Temperature: -30?C~75?C Operating Relative Humidity: 20~85 % (No condensation)
• Alarm Output : Buzzer Power Supply: 110~220V AC ? 10% , 50 / 60 Hz Power consumption: < 3 W Dimensions: approx. 84*69*34MM

• Input: DC 3V to 40V (input voltage must be higher than the output voltage to 1.5v above can not boost)
• Output: DC 1.5V to 35V voltage continuously adjustable, high-efficiency maximum output current of 3A
• Features: All Sanyo solid capacitors, the 36u thickening circuit boards, high-Q inductance with output value of high-power LED indicator
• Dimensions: 45 (L) x 20 (W) x 14 (H) mm (with potentiometer) weight: 20 gms

• Mostly used in Solar Street Light controlling and Various other applications
• Several Time Periods: the timing controller can be set up to 5 time periods under one mode. LED Display: the relay board LED displays 24-hour time, with 4 digits red color, clear to read. Special Function: DROK switch timer is with buzzer alarm function; with reverse protection function. Documentation: detailed documentation including, is convenient to hook up, set time periods, time and parameters etc.
• LED Display: the relay board LED displays 24-hour time, with 4 digits red color, clear to read.
• Special Function: switch timer is with buzzer alarm function; with reverse protection function.
• Documentation: detailed documentation including, is convenient to hook up, set time periods, time and parameters etc.

• The meter is a hand held 31/2digital multimeter for measuring AC/DC voltage and AC/DC current, resistance, diode , transistor, freguency, temperature and continuity test with battery operated
• Fit for schools, factories, families and amateur wireless lovers , Electronics Hobbyest, DIY
• Small and compact design A great electronic measuring instrument The back light of display is optional
• The back light of display is Bright Blue( Aqua Blue)
• 9 volt Battery Included

• Input: DC 3V to 40V (input voltage must be higher than the output voltage to 1.5v above can not boost)
• Output: DC 1.5V to 35V voltage continuously adjustable, high-efficiency maximum output current of 3A
• Features: All Sanyo solid capacitors, the 36u thickening circuit boards, high-Q inductance with output value of high-power LED indicator
• Dimensions: 45 (L) x 20 (W) x 14 (H) mm (with potentiometer) weight: 20 gms

• 50 W Mobile Phone Charger PCB 50 W ?????? ??? ?????? ?????? Power 50 W Board Base Thickness 0.3 mm Voltage 5.4 V
• Size 42x27 x22 mm Packaging Type Minimum Order Quantity 2 Product Specification Power 50 W Board Base Thickness 0.3 mm
• Product Specification Power 50 W Board Base Thickness 0.3 mm Voltage 5.4 V Product Description Comprehending the varied desires of our clients, we are instrumental in presenting a comprehensive range ofMobile Phone Charger PCB.also use ful for Mosquito zapper battery charge. 200 mah to 2.5 amp 4 volt Battery Charge ( Lithium/Lead Acid), school College projects, DIY projects, Research Projects. Innovation used
• No warranty and Non Returnable Product
• Direct inpur Voltahe - A.C 230 volt A.C Out Put 5.4 Volt DC

• Input voltage: 6V-40V Output voltage: 5V Output current: 3A Switching frequency: 150KHZ Conversion efficiency: 92% Working temperature: -40 to +85 degree Centigrade Color: Red Size: 59mm x 21mm x 17mm This module has short circuit protection DIY Mobile Power Supply, 5V output for charging Phone, MP3, MP4, , etc
• QUICK OVERVIEW Input : 6V-40V Output : 5V / 3A (MAX) Efficiency : 92% (MAX) Switching frequency : 150KHZ High efficiency and low ripple. With USB power indicator light. Maximum output 3A (at the same time with two mobile phones).
• Features : High efficiency and low ripple. With USB power indicator light. Maximum output 3A (at the same time with two mobile phones). Small and handy module. Easy to use.
• The module converts input of 6-40V into a very stable 5V 3A output. The device features a 2 USB port through which you can charge your phone. While charging your device please consider that the output of this device is regulated at 5V 3A. Simply connect this device to the power supply, the voltage can be detected in real time. When you need the phone, IPAD, MP3 and other digital products to charge, connect it to a power supply and it will start supplying 5V 3A at its output.
• Package Includes : 1 x Dual USB Output Car Charger Switch 5V DC-DC Power Supply Module

• Input: DC 3V to 40V (input voltage must be higher than the output voltage to 1.5v above can not boost)
• Output: DC 1.5V to 35V voltage continuously adjustable, high-efficiency maximum output current of 3A
• Features: All Sanyo solid capacitors, the 36u thickening circuit boards, high-Q inductance with output value of high-power LED indicator
• Dimensions: 45 (L) x 20 (W) x 14 (H) mm (with potentiometer) weight: 20 gms

Popular Categories on BuyBestBrands.in