Deep Fat Fryers By e-INFINITY

• The sensor module adaptable to ambient light, having a pair of infrared emitting and receiving tubes, transmitting tubes emit infrared certain frequency, when the direction of an obstacle is detected (reflection surface), the infrared reflected is received by the reception tube
• After a comparator circuit processing, the green light is on, but the signal output interface output digital signal (a low-level signal), you can adjust the detection distance knob potentiometer, the effective distance range of 2 ~ 30cm, the working voltage of 3.3V- 5V.
• Detection range of the sensor can be obtained by adjusting potentiometer, with little interference, easy to assemble, easy to use features, can be widely used in robot obstacle avoidance
• avoidance car, line count, and black and white line tracking and many other occasions. Package Size: 10cm x 10cm x 2cm (3.94in x 3.94in x 0.79in)

• Recommended : \"Prevention Is Better Than Cure\". Suitable For Everyone. Recommended For Every Health Conscious Man/Women/Child. It Has 4000+ Negative Ions Cc Power.
• Skin Friendly : No Corrosive Metal Used / Wear This Pendant 24 X 7 / No Need To Remove While Bath.
• Certification : Certificate Of Authenticity Included In The Box.
• Adjustable : Length Of Thread Can Easily Be Adjusted As Per Requirement
• Disclaimer : This Is Not A Medicine Or Medicinal Device. Do Not Stop Any Existing Medication.

• 1N4007 is a PN junction rectifier diode. These types of diodes allow only the flow of electrical current in one direction only. So, it can be used for the conversion of AC power to DC. 1N 4007 is electrically compatible with other rectifier diodes and can be used instead of any of the diode belonging to 1N400X series. 1N-4007 has different real life applications e.g. free wheeling diodes applications, general purpose rectification of power supplies, inverters, converters etc.
• Reverse dc voltage- ?1200V Rated working current- 1.0A Max positive voltage- 30A Reverse leakage current- 3uA Direct voltage- 1.0V
• 1N4007 has a lot of real life applications in Embedded Systems, a few of the major application associated with the particular diode are given below: Converters. For switching purposes in Embedded systems. Free wheeling diodes applications. Inverters. General purpose rectification of power supplies. To avoid reverse current & protect Microcontrollers like Arduino or PIC Microcontroller etc.
• Diodes of number IN4001, IN4002, IN4003, IN4004, IN4005, IN4006 and IN4007 have maximum reverse bias voltage capacity of 50V and maximum forward current capacity of 1A. Diode of same capacities can be used in place of one another. Besides this diode of more capacity can be used in place of diode of low capacity but diode of low capacity can not be used in place of diode of high capacity.For example, in place of IN4002; IN4001 or IN4007 can be used
• Package included - 500 Pcs 1N4007 Diode 1A 1000V Rectifier Diodes

• 1N4007 is a PN junction rectifier diode. These types of diodes allow only the flow of electrical current in one direction only. So, it can be used for the conversion of AC power to DC. 1N 4007 is electrically compatible with other rectifier diodes and can be used instead of any of the diode belonging to 1N400X series. 1N-4007 has different real life applications e.g. free wheeling diodes applications, general purpose rectification of power supplies, inverters, converters etc.
• Reverse dc voltage- ?1200V Rated working current- 1.0A Max positive voltage- 30A Reverse leakage current- 3uA Direct voltage- 1.0V
• 1N4007 has a lot of real life applications in Embedded Systems, a few of the major application associated with the particular diode are given below: Converters. For switching purposes in Embedded systems. Free wheeling diodes applications. Inverters. General purpose rectification of power supplies. To avoid reverse current & protect Microcontrollers like Arduino or PIC Microcontroller etc.
• Diodes of number IN4001, IN4002, IN4003, IN4004, IN4005, IN4006 and IN4007 have maximum reverse bias voltage capacity of 50V and maximum forward current capacity of 1A. Diode of same capacities can be used in place of one another. Besides this diode of more capacity can be used in place of diode of low capacity but diode of low capacity can not be used in place of diode of high capacity.For example, in place of IN4002; IN4001 or IN4007 can be used
• Package included - 50Pcs 1N4007 Diode 1A 1000V Rectifier Diodes

• PAM8403 5V Power Audio Amplifier Board 2 Channel 3W W Volume Control/ USB Power
• You are biding for one piece of PAM8403 Audio Amplifier Board.This board could be powered by USB Power supply. Operating voltage: 2.5V-5.5V
• Maximum output power: 3W*2(5V 4) PCB size is about: length 30mm width 22mm overall height after installed is about 16mm.
• Flexible assembly usage. Package includes(No Retail Package): 1Pc x Power Amplifier Digital Board

• Insulation properties, excellent stress control properties, long term weather and regular wear and tear resistance
• Bundles, and protects cables, wire and hoses and can be used in a wide range of DIY applications
• Used extensively for cable and wire harnessing, strain relief, insulation, color-coding, identification and protection.
• Top Quality Heat Shrink sleeve Polyolefin Heat Shrink tubes are excellent for insulation
• Diameter: 2mm, Shrink ratio:2:1, Color:- Black

• Stainless steel material is rust free and can retain sharpness for a long time.
• Sharp jaw clipper head makes can move your cuticles without pulling or tugging, which can remove those cuticles and dead skin even in or around small areas.
• Perfect aligned blades can cut nails or overgrown cuticles cleanly and painlessly.
• he cuticle pusher are made of durable wear-resistant antirust material,curved flat end pushes the dead skin up clearly and sharp knifepoint shaped end cuts or scrapes dead cuticle away.
• Double handle New Designed Single Foldable Stainless Steel Wire Spring is comfortable to grip and easy to cut.

• Easy to install in tape Remove the mud, worm, dust from water
• Double net for good filter water
• Package include 5 tap filter

• 1). High quality charging Chip TP4056, simple circuit, good protective value, high
• Complete mechanical automation processing, High reliability. 3). Automaticlly adjust the output current from 100 to 1000ma by simply changing the fixed resistor on the circuit board.
• Application It can be used to charge for one pcs of lithium battery or serval parallel lithium batteries.
• Parameter Input Voltage: 4.5~5.5V Full charging voltage: 4.2V Max output current:1A Power Indicator: Red stands for charging, Green stands for fullly charged. Input interface: Micro interface Item Size: 25mm*19mm.
• The output current and the corresponding resistance R1(K) I(mA) 30 50 20 70 10 130 5 250 4 300 3 400 2 580 1.66 690 1.5 780 1.33 900 1.2 1000 5. Notes: 1). The Ampere meter can only be connected to 5v input port of the module.

Popular Categories on BuyBestBrands.in