Drive & Transmission By Shanrya

• Has standard sizes, the outer diameter is 69mm, the inner diameter is 63.7mm, and the height is 47mm.
• The cylinder sleeve is suitable for 750W air compressor, used to replace damaged parts to ensure good operation.
• Made of aluminum alloy, corrosion resistant and wear resistant, not easy to deform after long term use.
• Cylinder sleeve is made of standard, with strong adaptability and easy disassembly and assembly.
• The exterior is glossy and shiny, the installation is smoother, and it will not damage the air compressor accessories during use.

• Has good oxidation resistance, wear resistance and corrosion resistance, long service life.
• Better braking performance for your car, suitable for most models with 7/8in handlebars.
• Clutch lever with cable is replacementfor Chinese Dirt Pit Bike 150cc 200cc 250c.
• High quality clutch brake lever, made of hard aluminum alloy. The surface is coated with black paint.
• Very suitable for market after sales replacement, can be used for repair, refurbishment, modification, etc.
• Warranty not applicable for this product

• These bearings are made of high quality steel for low noise and long service life.
• These are great for small hobby 17mm shaft/rod projects.
• They are double shielded to avoid contaminants entering and save lubricant.
• There comes total 10 pieces miniature bearings which you may use for many different projects.
• Bearings have a 17mm inner diameter, a 23mm outer diameter, and a 4mm thickness.

• The height of air compressor cylinder sleeve is 35 and 35.5mm, two models are available
• Because very convenient to disassemble and install, as a common accessory of air compressor
• Main purpose of cylinder sleeve repair is to eliminate errors and restore the matching clearance between the cylinder liner and the piston
• Manufactured by cast iron technology, standard production method, cylinder sleeve has a long service life
• The product is a silent oil free air compressor accessories pump head 1600W cylinder liner
• Warranty not applicable for this product

• Self Aligning Bearing: Reduce the side load on the bearing bearing, minimize the vibration and extend the life of the bearing.
• Come with Lock Ring: Clamped on the shaft to form a firm and non damaged holding force to prevent the bearing from falling.
• Easy to Install: There is no need to press on a bearing, the two parts are easy to locate, and then fixed in a few minutes.
• Replace Part: According to the original specifications, replacing reference OEM number is PA 9875.
• Perfect Application: Replacement for S 900 2015+ , replacement for RZR 4 900 2015+ and so on.
• Warranty not applicable for this product

• With uniform hardness and double shielding, it can prevent pollutants from entering and save lubricants.
• The bearing configuration is simple, the friction coefficient is small, the operation is fast and the vibration and noise are low.
• Made of stainless steel, anti rust and anti corrosion, can be used in various environments.
• There are steel dust covers on both sides of the bearing to prevent dust and foreign objects from entering.
• The kit contains 10pcs S6204ZZ mini bearings, which can be replaced and installed at any time, with strong practicability.
• Warranty not applicable for this product

• Miniature bearings have fast running speed and low noise, which can reduce damage to mechanical equipment.
• These bearings have steel dust covers on both sides to prevent the ingress of dust and foreign objects.
• Made of high quality stainless steel, resistant to high temperature and corrosion, and can be used in various environments.
• The kit contains 10pcs S6910ZZ miniature bearings, which are practical and can be installed and replaced at any time.
• The ball bearing has uniform hardness and double shielding to avoid the entry of contaminants and save lubricant.
• Warranty not applicable for this product

• Good working conditions for you: Easy to install, convenient to operate, which will bring much convenience to you.
• Processed from high quality low carbon steel, with extremely high heat resistance and wear resistance, and long service life.
• Stable characteristics and high reliability. The quality of the spring is trustworthy.
• The torque spring is replacement for GY6 50/60/80/100 139QMB 4 stroke air coolling scooters; DIO50 etc.
• Used for the replacement, refurbishment, repair, installation, etc. of the original car, which is the perfect replacement.
• Warranty not applicable for this product

• Replacing OEM numbers for reference: 1030680044.
• Including full set of friction plates, steel separator plates and springs.
• Original standard, direct replacement for the old or broken one.
• Easy to install, does not require complicated tools and operations.
• Practical accessory fit for Warrior 350 1987 2004.
• Warranty not applicable for this product

• Complete Accessory: The clutch plate kit includes 13 x clutch plate and 6 x spring, which can meet your needs.
• The clutch plate kit is replacement for Banshee 350 1987 2006, which can match your motorcycle well.
• Advanced Material: Made of high quality metal material, the clutch plate kit can be used for a long time.
• High Performance: The clutch friction discs can prevent heat distortion and have been tested to ensure quality.
• Easy Intsallation: The installation is simple, which does not require complicated operations and can save time and effort.
• Warranty not applicable for this product

• PROTECTION: Protect the transmission components from being deformed due to excessive force, twist off to ensure a smooth start and stop.
• WIDELY USE: Motorcycle clutch kit can be used for motorcycle, road bike, mountain bike, MTB.
• PREVENT OVERLOAD: Clutch kit can effectively transfer or cut off the power output of the engine to prevent overload.
• HIGH QUALITY MATERIAL: Made of high quality material, extremely heat resistant and durable for extended clutch life.
• PERFECT FITMENT: Clutch kit with heavy duty springs is replacement for YFZ450 2004 2006.
• Warranty not applicable for this product

• PART NUMBER: According to the original factory specifications, replacing reference OEM number is 26127521855.
• GOOD PERFORMENCE: Instantly restores proper driveshaft positioning and stabilization to help eliminate annoying clunking and vibration.
• STRONG DURABILITY: Provides effective sealing for different conditions, offers maximum load carrying capacity and durability, provides even load distribution. Enhances lubrication.
• EXCELLENT REPLACEMENT: Drive shaft support bearing, perfect replacement for 525i 530i 535i to better meet your demands.
• STANDARD CONFIGURATION: According to the original factory specifications. Perfect match for the original car.
• Warranty not applicable for this product

• The cylinder head is suitable for EY20 gasoline engine and generator with good adaptability.
• Made of excellent aluminum material, light weight and corrosion resistant, hard and durable.
• The cylinder head has a glossy appearance and no burrs, and it is not easy to damage the gasoline engine.
• The cylinder head has a standard female thread size, accurate installation and convenient disassembly.
• Mainly used to replace old or broken cylinder heads to ensure good and stable operation of the engine.
• Warranty not applicable for this product

• Widely Use: Mainly used for MTM 6Nm finger torsion electric scooters, electric wheelchairs, trucks and so on.
• DC Braking: Adopted DC brake, with low noise, suitable for a variety of power supplies with wiring changes.
• Stainless Steel: Made of high quality stainless steel material, no rust and not easy to deformation, has a long service time.
• Flexible Braking: With powerful braking force and flexible motor, has strong continuous ability to withstand emergency stop, can prevent mechanical reversal and short time stop of large inertia heavy load machine.
• Easy Assembly: With fine workmanship and compact structure, which is easy to assemble, convenient for you to use.
• Warranty not applicable for this product

• Made of high quality materials, safe and environmentally friendly, sturdy and durable, make your car look more real.
• Effectively protect the RC car body and shell, exquisite and practical, easy to install.
• Corrosion resistant and beautiful, it is very suitable to provide adequate protection for the car body and chassis.
• Lighting kits with LED lights, it is good substitutes for old or damaged parts.
• Direct installation, no need to drill, reliable and durable, making the car more vivid.
• Warranty not applicable for this product

• With proper design, the sprocket gear is only suitable for T8F chains, and the chain reduction ratio is 3:1.
• Perfectly matched, it is suitable for replacement, refurbishment and maintenance of the original car's gear box.
• Replacement for 43/47/49cc pocket mini bicycles, scooters, ATV gear reducers and rack clutch groups.
• Cost effective, it can replace old parts and improve the gearshift performance of the original car.
• Comprehensive accessories, it is equipped with a clutch and a total of 5 sprockets with 11, 13, 14, 17, and 20 teeth.
• Warranty not applicable for this product

Popular Categories on BuyBestBrands.in