Drive & Transmission By Shanrya

• Made of high quality aluminum alloy material, rust proof, wear resistant and durable.
• Reasonable design and perfect matching model cars improve the performance of RC cars.
• Practical functions have higher strength and durability, and can well replace old or damaged accessories.
• Not afraid of collision, fall or rot. It can withstand high temperature, strong wind and sunlight without affecting its normal visual effects.
• Suitable for Model Car 1/14 for Tractor

• Left clutch lever, fit for 7/8in handle bar, suitable for 50cc 70cc 90cc 110cc 125cc Dirt Bike.
• Can be installed easily, no complicated tools required, convenient to use, save time and effort.
• The clutch cable has a long length of 39in, flexible to use, perfectly replace the old clutch cable.
• The clutch handle is made of aluminum alloy, sturdy and durable. Black matte texture, stylish look.
• Strictly follow the manufacturing standard to make sure excellent performance, high dependability.

• Miniature bearings are suitable for high-speed and low-noise fields such as various industrial equipment and small motors.
• Made of high-quality stainless steel material, it is rigid and has good anti-rust performance and long service life
• Single row rolling bearings run fast and have low noise, which can reduce damage to mechanical equipment
• The rolling bearing has low friction coefficient, low starting and running torsion, and relatively stable performance.
• The kit contains 10pcs S604Z replacement bearings, which are easy to install and practical.
• Warranty not applicable for this product

• The premium left brake clutch lever is a perfect replacement for Baja Mini Bike 196cc 5.5hp 6.5hp Warrior Heat MB165 to better meet your demands.
• Throttle grips cable set is a replacement for 7/8in or 22mm bar dirt bike, 50cc 90cc 110cc 125cc 140cc 150cc 200cc and 250cc 4 stroke dirt bike, mini bike, pocket bike.
• The clutch lever is made of aluminum alloy, finely polished, black matte texture, very good hand feel, stable performance, matching the original, easy installation, long life, easy to use.
• The brake cable length is 60in (total 65in and sleeve is 60in), the throttle cable length is 52in, the handlebar diameter is 7/8in or 22mm.
• Very suitable for the replacement, refurbishment, maintenance and upgrading of the original vehicle clutch lever, aimed to improve the original vehicle transmission performance.

• Clutch handle and brake lever are made of aluminum alloy, finely polished, black matte texture.
• Good replacement parts, very suitable for the original car clutch lever replacement, refit, maintenance, upgrade and modification.
• High quality, stable performance, matching the original car, easy to install, long service life,
• Replacement for XR80 CRF70 CRF80 XR100 CRF100 Dirt Bike Motorcycle and Baja Mini Bike.
• Brake clutch lever throttle cable assembly is suitable for 7/8in/22mm Handlebar.

• Improved for more durability, mechanical automotive bearing can be widely used in bicycle industry, paper making machinery, vehicle axles, woodworking machinery, etc.
• Imported materials are polished to save energy consumption and high speed, practical and durable.
• Ball bearing runs fast and has low noise, which can reduce the impact on the equipment.
• With guaranteed quality, such ball bearing keeps high quality materials to increase rigidity and extend life.
• Support complete model, these bearings can be flat and smooth, entitled with clear lettering to be used for special car.

• Ball bearing runs fast and has low noise, which can reduce the impact on the equipment.
• Imported materials are polished to save energy consumption and high speed, practical and durable.
• Support complete model, these bearings can be flat and smooth, entitled with clear lettering to be used for special car.
• With guaranteed quality, such ball bearing keeps high quality materials to increase rigidity and extend life.
• Improved for more durability, mechanical automotive bearing can be widely used in bicycle industry, paper making machinery, vehicle axles, woodworking machinery, etc.
• Warranty not applicable for this product

• The high quality clutch is durable, not easy to be damaged, and does not need frequent replacement
• This pocket bike clutch is a good choice for your motorcycle, very suitable for daily riding and off road needs
• Pocket bike clutch, replacement for 43cc 47cc 49cc 2 stroke Mini Moto ATV Dirt Bike
• Made of high quality aluminum, wear resistant and corrosion resistant, and have a long service life
• Easy to use and quick to install, it won't take you too much time. The clutch maintenance method is simple and suitable for daily use

• The handlebar grips are designed according to ergonomics with no additional adjustments, convenient to use.
• The premium throttle and clutch handlebar Kit adopts good quality materials, features waterproof, sturdy and durable.
• Strictly full tested to ensure the quality before shipment, more safe to use, bring you more convenience.
• Wonderful replacement for 49cc 60cc 66cc 80cc Motorized Bicycle to better meet your demands.
• Convenient and reliable to use, easy to assemble and disassemble, the old equipment can be replaced directly.

• The front cover adopts self-lubrication bearing guide, with good lubrication and guiding performance.
• Piston seal adopts the special type double seal structure, there will be no leakage, compact size and oil storage function.
• The front and rear cover are threaded to the cylinder pipe
• The air cylinder is easy to install
• This air cylinder is made of high quality aluminum round tube cylinder, with long serving life
• Warranty not applicable for this product

• Double O ring gasket design, kept inside the bearing, very practical and useful.
• Due to the careful and meticulous manufacturing, making it reliable to use.
• Made of high grade 6061 aluminum, it is durable and has excellent high temperature resistance.
• Easy to install, no need to disassemble the axle, just disassemble the wheel and hub.
• Replacement for UTV and ATV models 44mm and 40mm inside wheel bearings.

• Brake clutch lever throttle cable assembly is suitable for 7/8in/22mm Handlebar.
• Good replacement parts, very suitable for the original car clutch lever replacement, refit, maintenance, upgrade and modification.
• Replacement for XR80 CRF70 CRF80 XR100 CRF100 Dirt Bike Motorcycle and Baja Mini Bike.
• Clutch handle and brake lever are made of aluminum alloy, finely polished, black matte texture.
• High quality, stable performance, matching the original car, easy to install, long service life,
• Warranty not applicable for this product

• With double bearing structure, the rotation is more stable, lighter than the loose ball bearing and single Pelin .
• The outer diameter of the head pipe is 4.18mm/0.2in, the inner diameter of the lower mouth is 52mm/2.04in, and it is also the outer diameter of the upper bowl and the lower bowl of the bowl group.
• One package is equipped 2 bottom fixing of different size to meet your needs in different situations.
• Made of reliable aluminum alloy and steel, easy to install, and is very practical. Good alternatives for parts, make rideing easier, more enjoyable.
• Smaller upper scale angular cartridge bearing can save item weight, larger lower bearings will provide strength and durability.
• Warranty not applicable for this product

• Throttle grips cable set is a replacement for 7/8in or 22mm bar dirt bike, 50cc 90cc 110cc 125cc 140cc 150cc 200cc and 250cc 4 stroke dirt bike, mini bike, pocket bike.
• The premium left brake clutch lever is a perfect replacement for Baja Mini Bike 196cc 5.5hp 6.5hp Warrior Heat MB165 to better meet your demands.
• The brake cable length is 60in (total 65in and sleeve is 60in), the throttle cable length is 52in, the handlebar diameter is 7/8in or 22mm.
• The clutch lever is made of aluminum alloy, finely polished, black matte texture, very good hand feel, stable performance, matching the original, easy installation, long life, easy to use.
• Very suitable for the replacement, refurbishment, maintenance and upgrading of the original vehicle clutch lever, aimed to improve the original vehicle transmission performance.

• The clutch cable has a long length of 39in, flexible to use, perfectly replace the old clutch cable.
• Strictly follow the manufacturing standard to make sure excellent performance, high dependability.
• The clutch handle is made of aluminum alloy, sturdy and durable. Black matte texture, stylish look.
• Left clutch lever, fit for 7/8in handle bar, suitable for 50cc 70cc 90cc 110cc 125cc Dirt Bike.
• Can be installed easily, no complicated tools required, convenient to use, save time and effort.
• Warranty not applicable for this product

Popular Categories on BuyBestBrands.in