Automotive - Car Accessories - Steering & suspension

• The set includes 4 drill-free Solar panel roof-top corner mounting brackets.
• Easy to install by any knowledgeable technician. (Some in as little as 1520 minutes. )
• They allow for front air conditioning operation without the loss of refrigerant from the rear lines or evaporator.
• Also makes it unnecessary to absorb the costly replacement of the rear air condition lines or evaporator (some estimates of repair approaching or exceeding $1500.00).
• The result is quality cold air especially in the mini van.

• LENGTH OF BOLT (LONG SIDE):around 35.91mm
• DIAMETER OF BOLT: around 10mm
• LENGTH OF BOLT (SHORT SIDE): around 25.04mm
• Specification:
• Material: metal

• Easy Operation: Easily removes inner tie rod ends without disassembling rack and pinion, save your time and energy.
• Widely Use: Suitable for tie rods between 27mm/1.06in and 42mm/1.65in in diameter, universal fit for various vehicles.
• Function: The surface is anti rust treated, beautiful, firm design to prevent falling off, the rolling gear can be adjusted arbitrarily.
• High Quality Material: Made of high quality chrome vanadium steel, high strength, good toughness, sturdy and durable.
• Professional Design: Designed for the removal of the direction of the steering rod, specially designed to be used with 1/2in square drive tools.
• Warranty not applicable for this product

• Directly Replace: Easy to install and disassemble, it can directly replace the original plastic or the damaged front steering knuckle to obtain higher strength.
• Aluminum Alloy: Made of high quality aluminum alloy material, the front steering knuckle is durable, wear resistant, and has a more refined appearance.
• Applicable Model: The aluminium front steering knuckle blocks set will not increase the extra burden of remote control car, fit for 1/5 remote control car.
• Realistic and Cool: Exquisite workmanship of the front steering block makes your remote control car look more realistic, more refined, cool and practical.
• Main Function: The steering knuckle can minimize the gap, so that the bearing and the steering knuckle are accurately combined, so that the bearing will not fall off due to severe vibration.
• Warranty not applicable for this product

• DIN3093 oval ferrule sleeves wire rope clip clamp 1-22mm
• Well packedgreat price
• Easy installation
• Durablewearresistantcorrosionresistant
• Fits for most of ATV Go Karts

• Easy Installation: High quality motorcycle accessory, easy to install and remove, does not require complicated operations.
• Durable Material: Made of superior quality metal material, waterproof, shockproof, sturdy and durable.
• Special Design: The coil over springs design is helpful to absorb shock quickly on rough roads to improve safety and make you feel comfortable.
• Strong Compatibility: Rear shock absorber is compatible with most vehicles, fit for 70 125CC Motorcycle Pit Dirt Bike ATV.
• Perfect Replacement: Classical and stylish red and black color, bringing you a satisfying consumer experience, your best choice for replacement and style upgrading.

• Superior steel alloy and rubber material, rigid and durable. With e-coating treatment, it can resist bad weather and road conditions.
• Designed to have the same form, fit and function as OEM original ball joint, dependable to use.
• The installation is simple and does not require complicated operations, convenient for using.
• With OEM of 1663300235, replacement for Mercedes Benz M Class W166 ML GL Class X166 GL.
• Link the joints of the suspension and the balance bar to transfer the force of the car suspension and the balance bar.
• Warranty not applicable for this product

• According to the original factory specifications, can perfectly match for the original car without any modification.
• The installation is extremely easy, just directly replace the broken or shabby one to save your valuable time.
• Perfectly fit for Benz S500 W222 M276.824 245 7A/MT 2015 2017 to eliminate the trouble of choice.
• Built to stringent OE specifications by an OE manufacturer, design to have same form, fit and function as OEM original part.
• Made of high quality stainless steel materials with stable performance and high reliability.

• Durable Material: Made of aluminum alloy material, strong and durable, can be used for a long time.
• Strong Compatibility: Good spare parts for remote control car, fit for MN86 series RC cars.
• Compact Shape: Small size, light weight, will not cause additional burden to the car, easy to use.
• Improve Performance: It helps to improve the overall performance of the remote control car and has strong flexibility.
• Stable and Reliable: Easy to install, reliable quality, guarantee stability and excellent performance.

• Gear Shaft: The gear shaft suits for use with the 28 tooth brass worm gear, which will build a very compact, high torsion and robust 28:1 gear reduction ratio. It's also self locking and can be reversed, so that the motor does not have to continue to apply torsion to maintain the load.
• 1.25 Module: Has a modulus of 1.25, and the centre hole is an 8mm hex hole to match our 8mm hex shaft and motor output shaft. The 8mm hex hole produces a positive drive, and the centre hole length reaches 33mm.
• Reliable Work: Increases the contact between shafts and the surface of the centre hole, and increases the clamping force and pressing area, providing greater supporting force to resist heavy radial loads. Can also handle heavy torsion loads without rounding or slipping of shafts and holes.
• Stable Transmission: Can stably transmit the torsion generated by the gear motor to the output shaft, and provide strong and stable power for the robot. The length of 33mm makes it possible to install it in a 45mm U shaped beam and there is enough space to install other gears.
• Good Match: The matched radial bearing and thrust bearing shaft can make the 8mm hex shaft mounted on the worm rotate smoothly and efficiently. The thrust bearing helps to deal with any potential axial load.
• Warranty not applicable for this product

• Stable performance, designed to replacement for Kawasaki, replacement for Yamaha, replacement for Suzuki.
• 325mm distance from the hole can be used, universal products, ensure the comfort when riding.
• Universal motorbike shock absorbers is made of aluminium and steel. Durable and safe, anti corrosion, wear resistance, sturdy, not easy to deform.
• Mainly used as buffers to maintain body balance. The suspension provides smoother driving and better overall damping management.
• Shock strength adjustable. Best choice for replacement, style upgrading or bike modification.
• Warranty not applicable for this product

• Built to meet original standard specification, and the air conditioning knob strictly follows the factory quality control.
• With perfect manufacturing, the air conditioner control button can ensure stable performance.
• Made of high quality ABS material, the air conditioner control button is practical and has a long service life.
• This air conditioner control button is a perfect replacement, which can directly replace the old or broke one.
• The air conditioner control button is repalcement for 1 Series E87 2004 2011 and replacement for X3 F25 2011 2016.
• Warranty not applicable for this product

• According to original factory specifications, perfect match for your original car
• Replacing OE numbers for reference: F87Z-18495-AA, YG350
• A key component to enhance your beloved car performance
• 100% brand new aftermarket replacement Heater Control Valve with premium quality
• Easy installation, compatible for Explorer Ranger Aerostar

• Simple to install and remove, no complicated operation is required, saving time and effort.
• Made of premium aluminum and steel, high strength, corrosion resistant and durable, it has long lifespan.
• 10.2in shock absorber, fit on most Dirt Bikes, Go kart and Moped Quad, replacement for MSX125 Grom MSX SF.
• Pressure can be adjusted by springs and air (nitrogen), which can meet different needs.
• Providing smoother riding and giving better overall shock absorption management, improving riding comfort.
• Warranty not applicable for this product

• Product name: Motorcycle Seat Adjuster Gas Struts
• Material: Metal
• 100% good quality products brand new
• Total length: 270mm 10.63
• Quantity: 2pcs

• Kindly refer the product description before buying the product.
• Mountain bike shock absorber turn point modified cycling accessories.
• Made of aluminum alloy material high strength durable anti-corrosion.
• Easy to install on your bike.
• A replacement components restore your shock absorber rear suspension.

Buy Automotives from the world of Automotives at buybestbrands.in

Buy Car Accessories online at buybestbrands.in

Take advantage of other benefits at buybestbrands.in

Popular Categories on BuyBestBrands.in