Electronics Store - Computer Peripherals - Networking - Repeaters And Extenders

• Supports a maximum resolution of 1920 x 1440 (60Hz)
• Works with a B132-002A-2 or B132-004A-2 local transmitter unit to extend a 1024 x 768 (60Hz) Video and Stereo Audio signal up to 1,000 ft. when using 24Awg, Solid Wire Cat5e/6 cable
• For optimal image quality between 500 and 1,000 ft., use Zero-Skew cable, such as Tripp Lite P524-01K
• Features built-in Equalization and Gain controls to adjust the video image
• RJ45 type wallplate allows you to use standard patch cable, eliminating the need for a 110 punch down connection

• Data Rate: 10G
• Wavelength: 850-nm
• Reach: up to 300m
• Fiber Type: Dual LC OM3/OM4 multi-mode fiber
• Compatible with Intel E10GSFPSR

• 2-PORT POE SPLITTERThis 2-port POE extender is designed to supply POE power to two POE devices through one Cat5E/6 cable, and no power adapter is required. It is powered by 48V or 53V PoE Switch/POE NVR/PoE Injector/Mid-span. With this POE splitter, users can easily add extra POE device or non-POE device to existing cable without running a new network cable.
• UP TO 1,000FT POE + DATA EXTENTIONExtra 330ft POE+Data transmission will be extended with one Linovision POE Extender. And it supports two levels cascade deployment, therefore total 1,000ft POE + Data transmission is provided. (The 2nd POE Extender's POE Input should be connected to the 1st POE Extender's Out port, not Camera port)
• COMPLIANT TO IEEE802.3AF/AT STANDARDThis POE Extender works with all standard IEEE802.3af/at POE Switches/POE injectors/POE NVRs. And the POE Outputs supply power to standard POE devices (don't support 24V POE Devices) , like POE IP camera/IP phone/IP speaker. Noted: The CAMERA Port supports max 8W power consumption and the OUT Port supports max 15W. The max bandwidth is 100Mbps. As the distance increases, the power and the bandwidth will decrease.
• EASY TO CONFIGURE IP CAMERA ON SITEBy interting this PoE-Extender02 to an existing PoE cable, installers can use laptop or CCTV Tester to easily adjust camera angle and configure IP
• PLUG-N-PLAY INSTALLATIONPlug-n-Play, no configuration or setup is required. With compact dimension ( 3.1?* 2 * 1?), enough to fit many junction boxes or outdoor waterproof enclosures.

• Guaranteed 100% Brocade compatible: Meets MSA standards and is designed, programmed and tested to perform identically to the Brocade xbr-000190 transceiver module
• Lifetime warranty: this Brocade xbr

• Please pair the new HDMI transmitter with receiver at the first using time:
• First, long press the receiver's middle button, until it shows \"release the button\"
• Second, long press the transmitter's middle button, until itshows \"Pairing\"
• Third, wait 5s, it will show \"Paired is OK\", then it will auto stream video
• One receiver can be paired with up to 8 transmitters. The connection way is the same
• One click the first TX's middle button, then it will be back to the blue interface. Then one click the second TX's middle button. It will display the second TX's content

• Electrostatic Discharge (ESD)
• Electromagnetic Interference (EMI)
• Reverse Voltage
• Reverse Voltage Over Voltage (active clamp)
• Short Circuit with auto restart

• Isolation, Industrial Design

• 40Gb/s QDR, QSFP+ to QSFP+ Connetor, 8-pair Differential Twinax Cable, Passive, 1 meters (3.3ft), 30AWG, 1 Pack.
• Compatible with Cisco, Meraki, Mikrotik, Intel, Fortinet, Netgear, D-Link, Supermicro, TP-Link, etc.
• All products are passed by TDR & VNA tests in our Signal Integrity Lab.
• Widely used in data centers, storage area networks, Network Attached Storage, high performance computing, etc.
• 30 days free-returned, exclusive FREE 3-year warranty and free lifetime technical support.

• This HDMI over fiber system is used to send High definition HDMI signals to remote audio/video transmission device through one Fiber Optic cable with SC/SC connector.
• The device can achieve signal distribution distances of up to 20Km(12.4miles) over a single SC/SC single-mode 9/125?m, and up to 500m (1640ft.) over a single SC/SC multi-mode 50/125 or 62.5/125?m. Suitable for both universal fiber type(S/M and M/M).
• Uncompressed HDMI transmission, High definition image output, Lossless. Super-stability transmission and Long work life.
• Support Video Resolution up to 1920*1080P@60Hz.
• Simple to Install, No need drive, Plug and Play

• VGA KVM Extender provides extension of VGA video audiosignallong distances over a single Ethernet RJ45CAT5/5e/6 cable, it supports high resolution up to 1920*1440@60Hzand keyboard/mouse signal(HID signal) and external stereo audio signal transmision.
• The extender can use for a wide range of applications requiring long distance transmiion of high resolution with high quality by its good stability and powerful security.
• Transmits VGA video and audio signalup to 200m/330ftover CAT5/5e/6cable Support video resolution up to 1920*1440@60Hz. Compliance with VGA standard.
• Support VGA loop out function. Support keyboard and mouse signal transmiion High compatibility, can auto-match source and display device. Built-in automatic adjustment system, make the image smooth, clear and stable.

Popular Categories on BuyBestBrands.in