Repeaters And Extenders By SIIG

• KVM Extender Over CAT Cable - This HDMI KVM extends USB keyboard, mouse (wireless ones supported), and HDMI signals up to 230FT (70 meters) over CAT 6/ 6e/ 7 cables. Remember this extender supports only point-to-point transmission, not over IP. We recommend good quality copper CAT cables.
• Uncompressed HDMI Signals - This KVM supports HDMI data transmission up to 4K@60Hz refresh rate near Zero latency. It also supports PCM audio (2 channels), digital 5.1 channel sound, and audio extraction from a S/PDIF Toslink audio jack on the Receiver (RX) to an external speaker. An additional HDMI output is located on the Transmitter (TX) to allow you to connect to a local display or monitor with an HDMI cable for monitoring.
• S/PDIF Audio & Touch Screen Control - The S/PDIF (Toslink) port located on the Receiver allows you to extract digital audio to the audio system or external speaker. Meanwhile, not only can you control your remote computer with a keyboard and mouse, but also control it with a touchscreen panel
• Easy to Use - No drivers required for setup. Simply plug and go to enable the use of a computer, DVR, NVR, and more devices control 230FT away. There are limitless applications on the KVM extender, such as offices, schools, public kiosks, hospitals, and call centers. It helps you secure computer consoles from public access.
• At SIIG, we are proud of our products and service. Our products are of high quality and built to last. We are here to assist should you need us. We provide a Manufacturer Warranty for our products and email support. Contact us through Amazon if any issues arise.

• FLEXIBLE HDMI EXTENDER - Supports 1-to-1, 1-to-Many, or Many-to-Many connection for multiple HDMI video sources broadcasting over UTP CAT5e/6 cable up to 395ft (120M) at 1080p 60Hz. Perfect for church services, sports bars, exhibitions, or advanced home theater setups.
• SCALABLE RX/TX MATRIX: Allows up to 256 RX & TX combined units (limited to 100 input to infinite output) over a dedicated IP network. Additional Transmitter units (part# CE-H23B11-S2) and Receiver units (part# CE-H23C11-S2) are sold separately. Note: Dedicated IGMP Gigabit Switch is recommended for best performance and reliability
• DIFFERENT SWITCH FUNCTION: Able to switch to different sources from the receiver side with push buttons, IR remote, or PC control software (Matrix only) control. Bi-directional RS-232: control RS-232-enabled devices at a remote location.
• SUPPORTS UP TO 1080p @60Hz video resolution. HDMI signal is transmitted through the IP network while utilizing H.264 compression technology
• IR EXTENSION & REMOTE CONTROL - IR pass-through allows IR signal to be passed back to the control source from the Receiver (RX) location

• Siig
• JUCB0611S1

• Siig
• JUCB0711S1

Popular Categories on BuyBestBrands.in