Cables By Wedinard

• The waterproof socket has an excellent 360 degree full shielding, and the damping design has a noise reduction effect to make it run stably
• The 8pin square flange socket has a standard M12 thread, which is widely used in various outdoor electrical equipment
• With IP67 waterproof rating, it can be used as cable plug-in, threaded coupling, quick connection, welding plug and socket, etc
• The product complies with IEC 61076 - 2 - 101 Industry 4.0 protocol and NEMA2000 standard, safe and reliable
• The shell and the pins are made of brass, which has good conductivity, and the epoxy resin sealing material can ensure good waterproof performance

• Cable is about 1 meter long and it is easy to use and connect
• This is a set of great connector cables used for Nema16 or Nema17 stepper motors
• There are total 5 pieces cable in one set that you may use for many projects
• These connector cables are made of premium PVC material for durable and long-lasting use
• The precise design will ensure its practicability in the work with highly performance

• Solar PV Special Cable: The cable is manufactured in strict accordance with EN IEC production standards, used for the connection between solar panel components and inverters or batteries
• High Efficiency: This is an EN50618 standard product, which can be used for photovoltaic power station system with a rated voltage of 1500V, has high power generation efficiency
• Electricity Safety: Produced with advanced equipment to ensure low eccentricity and uniform thickness of the wire, effectively preventing current breakdown and fire, and ensuring electricity safety
• XLPE Sleeve: Using environmental friendly XLPE sleeve, the cable has excellent electrical performance, good insulation performance, high and low temperature resistance and corrosion resistance
• Tinned Copper Wire: Internal adopts high purity oxygen free tinned copper, with ultra low resistance, energy saving, good insulation, large current carrying capacity and high voltage resistance

• Quality Material: The puncture probe is made of PA and stainless steel material, new and high quality. High reliability and long service life
• Practical Accessory: A good accessory for multimeter for car repair. Simple operation. Connect the test pin to the multimeter to start the test
• Wide Application: Suitable for multimeter, voltage detection and other testing equipment and conventional circuit detection
• Easy to Use: The automotive test cable kit is no need to remove the cable, it does not damage the cable
• Stable Performance: The multimeter test probe has fine workmanship, stable performance, safety and reliability, high sensitivity

• Mainly used in internal applications such as electronics and electrical equipment
• This wire uses tinned copper core, with high performance and fast transmission rate
• 105 high temperature resistant electronic wire, has long service life
• Small size, easy to carry and store, convenient to use and having good performance
• Fine workmanship, wear - resistance and corrosion - resistance, durable and sturdy

• Current and Voltage: Voltage 30V AC - 60V DC/Maximum 19A current, used in electronic instruments, industrial equipment, etc
• Easy Connection: 6mm U - shaped insert, it can be inserted into the conventional terminal, and the tail can be used to connect the equipment
• Wide Application: Widely used in electronic equipment, inverters, welding machinery, charging generators, ships, RVs, trucks, automobiles, etc
• Easy Identification: Red, black, yellow, blue and green are available in various colors for easy identification of terminals
• Good Conductivity: The brass connector with ABS insulating sheath, with strong connectivity and good conductivity

• Easy and simple to use this accessory to build railings. You can make railings for your garden, stairs and aisles, and the railings will look great
• Adjustable range, to deal with the change of cable length under different temperatures, but also make it easier for beginners to install
• Made of high quality 304 stainless steel, rust - proof and more durable, high tensile strength and fatigue resistance
• This kit is ideal for securing 1/8 inch stainless steel wire rope cables to wooden posts
• Very suitable for outdoor and indoor railings or horizontal, vertical, and straight cable guardrails of any angle or flat staircase

• [High Current] Terminal strip with 200A current and 600V voltage, using red copper thickened contact parts, colored zinc screws, full current, nickel plated exterior, prevent corrosion
• [Easy Wiring] Dual row screw terminal block is convenient to use, easy wiring, screws can use slot, two kinds of screwdriver, easy to operate, save time and effort
• [Multi Application] Wire barrier block is widely used, can be applied to various industries, such as bridges, lighting, tunnel distribution, power distribution systems, etc
• [With Transparent Cover] This wire terminal strip with a transparent plastic protection cover, you can clearly see the wiring, dustproof, but also to prevent accidental contact with the terminal
• [PC Shell] The shell of the cable terminal block is made of premium PC engineering plastic, high temperature resistance, high toughness, not easy to break, longer service life

• Multi-point control can be done, the control switch can be determined according to the liquid level position
• With reed switch, no separate power supply is required
• High reliability, easy to install, the junction box protection grade is above IP-65
• The material is stainless steel SUS304, can be used in high temperature and high pressure places, suitable for different density, different acid and alkali, different pressure and temperature
• Lightweight, simple working principle and high reliability

• The conductor is tinned with 7*0.127 tinned copper, which has good effect
• With acid and alkali resistance, oil resistance, moisture resistance, mildew resistance, easy to peel and cut
• Insulation material: insulated with heat-resistant PVC, safe to use
• Generally used in the connection of internal wiring of electronic, electrical and equipment instruments, large transformer and lamps, and motor wires
• Combustion test: It can pass UL VW-1 and CSA FT1, vertical flame test

• Insulation material: insulated with heat-resistant PVC, safe to use
• Combustion test: It can pass UL VW-1 and CSA FT1, vertical flame test
• Generally used in the connection of internal wiring of electronic, electrical and equipment instruments, large transformer and lamps, and motor wires
• With acid and alkali resistance, oil resistance, moisture resistance, mildew resistance, easy to peel and cut
• The conductor is tinned with 7*0.127 tinned copper, which has good effect

• Simply wrap the cable on each side of the screw, and then use a suitable wrench to tighten the board down
• The is polished processed, without burrs, and it will not hurt your hands during use
• It is used for wire rope tightening, which is widely used in industry or home decoration, such as tent rope, wiring, railing cable, etc
• Using high - quality stainless steel, it is corrosion - resistant, waterproof, rust - proof, high - temperature resistant, and can be used for a long time
• Duplex 2 - post cable clamp can offer improved tightening effect and looks more tidy compare to the single bolt

• Selected and accurate materials are processed accurately, and the product life cycle is greatly extended
• 1meter/0.7 meters can be disassembled and combined in any length to meet work needs
• Cable Drag Chain Full Enclosed Low Noise Series Tank Towline Removable Assembly
• Surface is glossy and firm, reducing the resistance and friction with the tube, low noise, and high - speed continuous movement
• Made of nylon 66 materials, low temperature resistance - 25, high temperature resistance 100

• Different length of the standoff can meet needs, convenient to use
• Great workmanship, easy to install and remove
• M3 2-ways hex brass standoff with complete specifications, covering 5mm to 50mm length
• Made of high quality brass material, durable and wear-resistant
• Widely used in electrical equipment such as PCB boards

• WITH INSULATION SHEATH: Using PA insulation sheath, the main body is nickel or gold plated brass, possess excellent corrosion resistance
• DURABLE BRASS MATERIAL: Made of Premium Material brass, these banana plugs are durable enough to last a long time, which are great connectors for cables and other electrical equipment
• 2 CONNECTION METHOD: Banana plug support voltage for 1000V, current is 32A, can be soldered or inserted to connect
• FOR WIRES CABLES: Easy to use, can be attached to wires by soldering. Commonly used to connect wires or cables, possess good insulation, safe to use
• SAFETY SEALED PROTECTION SHROUDED: 4mm banana plug with safety boot, fits all standard 4mm shrouded banana jacks and sockets

• BASIC SPECIFICATIONS: Applicable voltage is 277/480V, the rated current is 30A, and the plugging life is more than 20,000 times
• PA66 PLASTIC: Shell uses the Premium Material PA66 plastic material, the industrial plug is wear resistant and durable
• APPLICATIONS: Widely suitable for for various electrical applications, such as for stove, dryers, generators and more
• BRASS CONTACT: Industrial locking plug adopts brass contacts, good conductivity, efficient and practical, easy to plug and unplug
• VOLTAGE RESISTANCE: Good voltage resistance, the different parts and shells should be able to withstand AC2500V (50HZ - 60HZ)

Popular Categories on BuyBestBrands.in