Door Chimes & Bells By Dreyoo

• [Eye Catching Doorbell Button]: the distinctive design with light helps to bring you convenience at night; The lighted door push button provides visibility after dark so visitors are never left searching for the doorbell; Retro shaped design is suitable for any front door decoration
• [Foolproof Installation]: simple flush installation; You need to pre drill a 0.7 inch deep and 0.5 inch round hole on the mounting surface to accommodate the doorbell and wires, there are reserved screw openings on the surface of the bell buttons, and then just connect the 2 poles on the back according to the home doorbell wiring
• [Reliable Metal Material]: doorbell buttons are made of sturdy, smooth metal material that is waterproof and UV resistant, The metal surface will not turn yellow in the sunlight and has a non stick effect that can be pressed many times; (Temperature Resistant: -4 to 240 degrees Fahrenheit); A good replacement for old, yellowed, cracked plastic buttons
• [Highly Compatible]: doorbell push button is suitable for low voltage ringing systems, it is a good replacement for traditional doorbell switch or garage door opener; The replacement wired doorbell buttons can be replaced with any doorbell button using the same wiring as the old doorbell
• [Specification]: the doorbell ringer button measures approximately 2.7 x 1.2 x 1 inch/ 7.1 x 3.2 x 2.5 cm, doorbell button has mounting screw holes with 2 screws for replacing the doorbell lighted button without drilling (2.3 inch between the screw holes); NOTE: bell cord is not included

• : this doorbell button is made of solid and sleek metal material that is waterproof and UV resistant; (Tolerance temperature: -4 to 240 degrees Fahrenheit) A good replacement for your old, yellowed, cracked plastic button
• [Bright LED Light]: the antique bronze LED light doorbell button is lit 24 hours a day; Provide visibility after dark and your visitors will not spend time looking for your doorbell; It does not get hot or burn out like bulbs
• [For Front and Back Doors]: this large wall mounted doorbell button switch up to 5.1 x 1.3 x 0.3 inch, can be applied for front doors and back doors
• [Simple Installation]: the package comes with mounting screw holes and may not need to be drilled if applied as a replacement doorbell button; Bell wire is not included
• [Note]:Working voltage 8-24V, If you use a digital ringtone (play the melody; Speakers with sound), diodes are required (not included); If you are using a mechanical doorbell ring (2 note sound; Like a mallet hitting a metal bar), diode is not needed

• [Solid Retro Material]: this doorbell button is made of solid metal material that is waterproof; Tolerance temperature: -4 to 240 degrees Fahrenheit; A good replacement for your old, yellowed, cracked plastic button
• [Bright LED Light]: the upgraded LED light doorbell button is lit 24 hours a day and work on low voltage; Provide visibility after dark and your visitors will not spend time looking for your doorbell; It does not get hot or burn out like bulbs
• [For Front and Back Doors]: wall mounted doorbell button switch with light is classic design that can be applied for front doors
• [Simple Installation]: the package comes with mounting screw holes and may not need to be drilled if applied as a replacement doorbell button (the distance between the screw holes is 2 inch); Bell wire is not included
• [Warm Note]: if you use a digital ringtone (play the melody; Speakers with sound), diodes are required (not included); If you are using a mechanical doorbell ring (2 note sound; Like a mallet hitting a metal bar), no diode is needed

• : this doorbell button is made of solid and sleek metal material that is waterproof and UV resistant; (Tolerance temperature: -4 to 240 degrees Fahrenheit) A good replacement for your old, yellowed, cracked plastic button
• : the newly upgraded LED light doorbell button is lit 24 hours a day; Provide visibility after dark and your visitors will not spend time looking for your doorbell; It does not get hot or burn out like bulbs
• : simple wall mounted doorbell button switches with light is classic design that can be applied on stucco or wood surfaces, for front doors or garage door openers
• : the package comes with mounting screw holes and may not need to be drilled if applied as a replacement doorbell button (the distance between the screw holes is 2 inch); Bell wire is not included
• : if you use a digital ringtone (play the melody; Speakers with sound), diodes are required (not included); If you are using a mechanical doorbell ring (2 note sound; Like a mallet hitting a metal bar), diode is not needed

• Quality Metal Material: this doorbell button is made of solid and sleek metal material that is waterproof and UV resistant; (Tolerance temperature: -4 to 240 degrees Fahrenheit); A good replacement for your old, yellowed, cracked plastic button
• Bright LED Light: the newly upgraded LED light doorbell button is lit 24 hours a day; Provide visibility after dark and your visitors will not spend time looking for your doorbell; It does not get hot or burn out like bulbs
• Widely Application: simple wall mounted doorbell button switches with light is classic design that can be applied on stucco or wood surfaces, for front doors or garage door openers
• Simple Installation: the package comes with mounting screws and may not need to be drilled if applied as a replacement doorbell button (the distance between the screw holes is 2 inch); Bell wire is not included
• Note: working voltage 8-24V; If you use a digital ringtone (play the melody; Speakers with sound), diodes are required (not included); If you are using a mechanical doorbell ring (2 note sound; Like a mallet hitting a metal bar), no diode is needed

Popular Categories on BuyBestBrands.in