Home » Home Improvement » Electricals » Blackt Electrotech

Electricals By Blackt Electrotech

Blackt Electrotech BT-20DD Wireless Remote Control Switch System with Speed Regulation for 4 Lights and 1 Fan (White) - Product Features
  • What is : (1) it can use 4+1 and 8+2 if you have 2 units (by long pressing 1 and 5 buttons)... (2) warranty increased 18 months (Applicable from 1 Aug 17).... (3)composite pcb... (4)fan speed and heating problem solved
  • Made in indian /save electricity/ inbuilt memory/ use for 4 lights and 1 fan/ humming less fan speed/ highly durable/fluctuation less switching for lights/ relay based switching (1000 Watt per pt)
  • No need to change existing wiring, it can be install inside or outside switch board (i.e. keep outside only sensor)
  • Operate through remote control as well as from your existing switch board buttons manually. Your suggestions is very important to update this product time to time , please leave msg official site or here
 
Blackt Electrotech 230V 24x7 Energy Saving Socket Type Digital Programmable Electronic Timer (White) - Product Features
  • 16 Programme on/off with memory/ LOAD CAPACITY: 1000 Watt (i.e Any general appliance)/ As per INDIAN STANDARD PLUG SOCKET
  • Power type: AC 220-240V 50/60Hz (Indian standard power supply)
  • Current consumption without load: 0.015MA
  • Energy-saving electronic timer programming.
  • 24 x 7 programmable.
  • Repeat programs with 16 on/off settings, and setting on/off manually.
  • Working light power indicator clearly
  • Color: white
  • Item size: 107*65*35mm
  • Net weight:126g
  • Min setting time: 1 min
  • 1000 watt / 10 amps 240 v ac
  • Operating temperature: -10 to + 40 deg c
  • 24 hours / 7 days a week programmable
  • Built-in battery for backup when power failure
  • Repeat programs with 16 on/off settings, and setting on/off manually
  • Battery backup: ni-mh 1.2v 80mah
  • Current cunsumption: 0.015ma
  • Press the prog button and release.The first on setting can be made now.
  • Press week button to set the day or blocks of days. Set the time by pressing the hour button and then min button.
  • Press the prog button again to finish the first on setting and enter into the first off setting. By repeating 2 to make the first off setting.
  • Press the prog button again to finish the first off setting and enter into the 2 on setting. Repeat 2 and 3 to program remaining settings.
  • After completing setting, press the clock button and the timer is ready to operate.
 
Blackt Electrotech 360 Degree PIR Motion Sensor With Light Sensor (Ceiling Mounted) - Product Features
  • Good solution for energy saving & easy in installation. & Delay adjustment: 10 Seconds - 7 Minutes & Adjustable Lux: turn on the lights during the day or night.
  • Using the automatic control product of infrared technology,when people walk into the sensor range,and the sensor can detect the spectral change of the human body infrared ray,during this time,the switch will connect the load automatically until the person leaves the sensor range. 2, Through the photosensitive control , it will not turn on the lights in the daytime or light environment, but also can be adjusted in any lighting environment sensing lights .
  • Sensitivity Adjustable: Turn On Lights during Day or nights.
  • It can use with lamps, incandescent lamps (bulbs), old-fashioned fluorescent lamps, electronic fluorescent ring lamps, spotlights, transformers, small electrical appliances, and other all other appliance.
  • Now switch on/off your lights, bulb, cfl,
  • Automatic
  • Use infrared pir motion sensor
  • Operating volt: ac 220-250v 50hz-60hz.
  • Load power: upto 300/1200w max
  • Ambient light: 3-2000 (adjuestable)
  • Load type: incandescent lamp, led light, clf, fans,
  • Detecting distance: 0~7m
  • Detecting angle: 360 degree.
  • Installtion hight: 2.2-4 mtr
  • Motion detetion speed: 0.6~1m/s
  • Power cusumption:0.1w (static) & 0.4(work)
  • Working humidity: less than 93%rh
  • Delay: 10 seconds -7 minutes (adjustable)
  • Keep sensor unit 1.6 mtr higher from the ground level.
  • The light, such as incandescent lamp which emits high heat should be kept from the switch aways, or it will be turn on/off voluntarily.
  • On being fixed to the wire first time, the switch' initialization will take 1-2 minutes. It's natural for the switch to turn on/off voluntarily.
  • When you install the switch on daytime, the default state of the switch will make the light off.Keep the detector of the switch from illumination, & then the light will turn on. The darker, the switch will be more sensitive. If it is not very sensitive, turn the yellow port counterclockwise with a long and thin tool to get a proper light sensitivity.
 
Blackt Electrotech: 230Volt Auto Day/Night On & Off Photocell, LDR Sensor Switch For Lighting (Water Proof)(2 Pic Pack) - Product Features
  • (2 Pc Pack) Warranty:18 Months Manufacture from 1 Aug 17. Warranty Service : Replacement.
  • --- New Product: http://www.amazon.in/dp/B074T7Y5PSLOAD--- CAPACITY : 1000 WATTS,WIDE LIGHT SENSOR/ BEST USE for OUTDOOR USAGE
  • Light turn on in the dark and turn off on daytime, intelligent sensor, no need to operate by manual.
  • Working : As shown in the above diagram out of three wire's Red : Load, Blue : Neutral & Brown : Phase. Connect Red & Blue to Load Application where using (i.e. Lighting) & Brown and Blue to 230 VAC input supply. Now it is ready to operate Day/Night mode. For testing keep torch over to the Photocell load will turn ON.
  • Automatic Sensor Light Control Switch/ It can use Street Light, Garden Lights, Incandescent lamp, LED lights. If you have any query fell free to contact us. Blackt Electrotech Official site . www.blackt.in packing is tested before dispatched so that the item reaches to the buyer safely and undamaged.
  • Operating volt: ac 220-250v 50hz-60hz.
  • Rated current:6 amp
  • Ambient light: < 5-15 lux
  • Working temp: -20~+40 degc
  • Working humidity: < 93% rh
  • Brown : Phase
  • Blue : Neutral
  • Red : Load
  • 2 piece x Photocell Module
  • 2 piece x Installation Manual
  • 4 piece x Mounting Screw
  • 2 piece x Mounting Plate
  • Bill
 
Blackt Electrotech BT31P2 230Volt Auto Day/Night on and off Photocell LDR Sensor Water Proof Olive Wood Lighting Switch (White) - Product Features
  • Warranty:18 months manufacture from 1 aug 17
  • Capacity : 1000 watts,wide light sensor/ best use for outdoor usage
  • Light turn on in the dark and turn off on daytime, intelligent sensor, no need to operate by manual
  • Working : as shown in the above diagram out of three wire's red : load, blue : neutral and brown : phase. Connect red and blue to load application where using (i.e. Lighting) and brown and blue to 230 vac input supply. Now it is ready to operate day/night mode. For testing keep torch over to the photocell load will turn on
  • Automatic sensor light control switch/ it can use street light, garden lights, incandescent lamp, led lights
 


Facebook Twitter Instagram LinkedIn
© 2018 - BuyBestBrands.in All Rights Reserved
hit counter