Extension Cords By Nicelux

• NOT for PU or Epoxy Waterproof -You can DIY both strip to strip bridge(jumper) and strip to power connector wire(pigtail) that is up to 3 meter long.Use it to extend strip light in different gap length and angles (mostly L shape 90 degree),flame retardant housing,copper pin,coolly work with 5A current(3V,5V,12V,24V)
• APPLICABILITY -Make sure your strip light match this connector.1.protection type:IP20 Non-waterproof or real silicon waterproof,not for pu or epoxy cover waterproof,please check before you order. 2.single color 10mm wide SMD5050 / SMD5630 / SMD5730 strip light ranging 30~90 LEDs per meter or 120 * SMD2835/ 3014 /2216 /2010 per meter. 3.Support normal thickness double side back tape, red thick 3M VHB foam and blue thermal conductive tape
• PIERCE TO CONTACT -Each of the 5 splicers has 2 ends,one end is for 10mm flex tape light(both IP20 and SILICON waterproof compatible),when snapping the cover, the pins can penetrate PCB from strip's back side, another end is for the 2 pin wire coming with,snapping the cover, the pins(blades) will cut into cable insulation to contact the wire core. No need soldering,no need stripping silicon waterproof cover and no need stripping wire insulation
• FIX STRIP FIRMLY -Innovative fixing bar and piercing contact design will grip strip light tightly,never worry strip light or wire moving out of connector
• NO BLOCK LIGHT -Cover is clear that will not block light of first SMD of strip light. you can hardly see dark area in beginning of your targeting lighting area

Popular Categories on BuyBestBrands.in