Hand Tools By MANTISTOL

• Eighth upgrade of LVT-330; A set of vinyl plank cutter LVT-330; include 3 pcs slotting blades (0.5inch, 1inch, 1.3inch ) and 10 inch Contour Gauge for U-cutting vinyl flooring.
• The blade of our LVT-330 cutters can be moved. There are many complex scenes on the construction site that need special cutting (irregular corners?most of which are columns, door edges and wall corners). It can help you finish your work smoothly. Be sure to buy one of the good things and try it, not to mention the Value of Charm, which will save you a lot of time?
• Design for cutting LVP, WPC, SPC, LVT, VCT, PVC, Vinyl Plank Flooring; No dust, No noise, No electricity needed, Easy and Professional cutting vinyl floor.
• Why does the floor you cut crack? Because your floor must be Rigid Core Vinyl Plank ?SPC or RVP?, it is a stone-plastic composite material, which contains stone powder; Floor cracks occur when at least two or more cuts are required to make long cuts and corner cuts;If you want to corner cuts, Each cut can only cut 1/16 inch deep & approximately 4 inches cutting length, which is equal to that each cut is the upper surface of the floor. (requires some skills and control your strength)
• Soft vinyl flooring that can be fully cut?Hard and prone to cracking flooring, for long cut, L cut, and u cut, please refer to the usage tips. Originally, I didn't mind cutting, but since many users often need to use it, I wrote down the usage skills. In this area, users can easily damage the cutter due to improper operation. If the blade is used for a long time and becomes not sharp, it is difficult to make shallow cuts. Be sure to keep the blades sharp or replace them.
• Replacement blade can be got at the online official brand store (MANTISTOL).
• Only for ages 18 and above, please follow the instructions and operate it easily.

• The blade of our cutters can be moved. There are many complex scenes on the construction site that need special cutting (irregular corners?most of which are columns, door edges and wall corners). It can help you finish your work smoothly. Be sure to buy one of the good things and try it, not to mention the beautiful price, which will save you a lot of time?
• Design for cutting LVP, WPC, SPC, LVT, VCT, PVC, Vinyl Plank Flooring. Cutting unapproved materials will void warranty.No dust, No noise, No electricity needed, Easy and Professional cutting vinyl floor, Save time.
• Why does the floor you cut crack? Because your floor must be Rigid Core Vinyl Plank ?SPC or RVP?, it is a stone-plastic composite material, which contains stone powder; Floor cracks occur when at least two or more cuts are required to make long cuts and corner cuts;If you want to corner cuts it,Each cut can only cut 1/16 inch thickness & approximately 3 inches cutting length, which is equal to that each cut is the upper surface of the floor. (requires some skills and control your strength)
• 8.9\" cutting width and 8mm cutting depth. Straight cut, Angle cut; \" L & U\" cut, Rip cut and more. Clearly marked measuring guide. 0-45? Angle Cutting, Translational cutting,the deep of the throat is 115mm/4.5inch.Easy to use and to carry around.
• Replacement blade can be got at the online official brand store (MANTISTOL).

Popular Categories on BuyBestBrands.in