Home Improvement By Blackt Electrotech

• ?LED Sensor Night Light?100% brand new and high quality, motion Activated cordless 9-LEDs bright white LED night light lamp. No outlet or wiring Needed. LED sensor night light, with bright LED lamp beads, human infrared sensor, battery-powered, easy to install, auto-sensing lights when people pass anytime, off automatically after 25 seconds.
• Light Angel is the easy to install porch light. Its innovative motion sensor lights up the ultra-bright LEDs for 25 seconds at a time.
• This motion activated light is perfect for porches, patios, pools, docks & more Make all of your paths, steps & stairs safer than ever with Light Angel!
• Light Angel's LED light bulbs last up to an amazing 100,000 hours! And this outdoor automatic porch light can last through all kinds of weather
• ?Easy to Install ?This light is completely wireless so you can install it anywhere quickly.No outlet or wiring needed, with the pedestal of hanging hole, Install motion sensor light in seconds using stickers or mounting with 3 screws. Easy and convenient to install. NO Electrician Needed?
• Keep sensor unit 1.6 mtr higher from the ground level.
• The light, such as incandescent lamp which emits high heat should be kept from the switch aways, or it will be turn on/off voluntarily.
• On being fixed to the wire first time, the switch' initialization will take 1-2 minutes. It's natural for the switch to turn on/off voluntarily.
• When you install the switch on daytime, the default state of the switch will make the light off.Keep the detector of the switch from illumination, & then the light will turn on. The darker, the switch will be more sensitive. If it is not very sensitive, turn the yellow port counterclockwise with a long and thin tool to get a proper light sensitivity.
• Motion activated cordless 9-leds bright white led night light lamp. No outlet or wiring needed. Led sensor night light, with bright led lamp beads, human infrared sensor, battery-powered, easy to install, auto-sensing lights when people pass anytime, off automatically after 25 seconds.
• Light angel is the easy to install porch light. Its innovative motion sensor lights up the ultra-bright leds for 25 seconds at a time.
• This motion activated light is perfect for porches, patios, pools, docks & more make all of your paths, steps & stairs safer than ever with light angel !
• Light angel's led light bulbs last up to an amazing 100,000 hours! And this outdoor automatic porch light can last through all kinds of weather.
• This light is completely wireless so you can install it anywhere quickly. No outlet or wiring needed, with the pedestal of hanging hole, install motion sensor light in seconds using stickers or mounting with 3 screws.
• Easy and convenient to install. No electrician needed !

• 18 Months Mfg Warranty from 1 Aug 17. Detection angle: 360 and Rated load: 1200Watt
• This microwave motion sensor reflects the latest development in interior lighting technology and provides close to zero energy wastage in terms of lights being on unnecessarily./ HF system : 5.8GHz CW radar,ISM band
• Adjustable Function: Time delay (8 Sec to 12 Min), Sensitivity (1-8m Radii), Light Setting (2-2000 Lux),
• Connection Point : L:- Phase/Line , N - Neutral i.e. (common for Both I/p & O/p) & L':- Load/to light
• Why Microwave motion sensor? Quick response time, Higher accuracy than PIR, Don't affect temperate, wide range, Detect outside glass or other thin material.This microwave motion sensor reflects the latest development in interior lighting technology and provides close to zero energy wastage in terms of lights being on unnecessarily.
• Take down the top cover by turning it anti-clockwise
• Hold base against the wall and mark drill holes, paying attention to any existing wiring in the wall
• Drill the holes, insert wall plug
• Put the power wire and load wire throughthe base holes
• Screw the base into place
• Connect the mains power supply and the load wire to the connection terminal according to connection-wire mark
• Fit glass shad and turn it clockwise

• Good solution for energy saving & easy in installation. & Delay adjustment: 10 Seconds - 7 Minutes & Adjustable Lux: turn on the lights during the day or night.
• Using the automatic control product of infrared technology,when people walk into the sensor range,and the sensor can detect the spectral change of the human body infrared ray,during this time,the switch will connect the load automatically until the person leaves the sensor range. 2, Through the photosensitive control , it will not turn on the lights in the daytime or light environment, but also can be adjusted in any lighting environment sensing lights .
• Sensitivity Adjustable: Turn On Lights during Day or nights.
• It can use with lamps, incandescent lamps (bulbs), old-fashioned fluorescent lamps, electronic fluorescent ring lamps, spotlights, transformers, small electrical appliances, and other all other appliance.
• Now switch on/off your lights, bulb, cfl,
• Automatic
• Use infrared pir motion sensor
• Operating volt: ac 220-250v 50hz-60hz.
• Load power: upto 300/1200w max
• Ambient light: 3-2000 (adjuestable)
• Load type: incandescent lamp, led light, clf, fans,
• Detecting distance: 0~7m
• Detecting angle: 360 degree.
• Installtion hight: 2.2-4 mtr
• Motion detetion speed: 0.6~1m/s
• Power cusumption:0.1w (static) & 0.4(work)
• Working humidity: less than 93%rh
• Delay: 10 seconds -7 minutes (adjustable)
• Keep sensor unit 1.6 mtr higher from the ground level.
• The light, such as incandescent lamp which emits high heat should be kept from the switch aways, or it will be turn on/off voluntarily.
• On being fixed to the wire first time, the switch' initialization will take 1-2 minutes. It's natural for the switch to turn on/off voluntarily.
• When you install the switch on daytime, the default state of the switch will make the light off.Keep the detector of the switch from illumination, & then the light will turn on. The darker, the switch will be more sensitive. If it is not very sensitive, turn the yellow port counterclockwise with a long and thin tool to get a proper light sensitivity.

• Please check before buying >> Sold and fulfilled by 'Blackt Electrotech'. Warranty is not cover buying from \"Other Sellers\". Original product listed & Sold by Blackt Electrotech's only.
• 18 Months Mfg Warranty from 1 Aug 17.
• Detection Range:360degree/ Rated Load:max.1200W/ Detection Distance: max.6m
• Time Delay:10sec to 7min(adjustable)
• Home
• Office
• Shops
• Hospitals
• Bathroom
• Corridor
• Step
• Parking area & etc
• Load power: Upto 300/1200W Max
• Ambient Light: 3-2000 (Adjuestable)
• Load type: Incandescent lamp, LED light, CLF, fans, etc
• Detecting distance: 0~7M
• Detecting Angle: 360 Degree.
• Installation Height: 2.2-4 Mtr
• Delay: 10 Seconds -7 Minutes (Adjustable), Motion Detection Speed: 0.6~1m/s
• Power Consumption (static) & 0.4(Work)
• Working Humidity: less than 93%RH
• PIR Motion Sensor: Works by detecting human motion infrared rays
• Light Sensor: 3LUX~2000LUX adjustable, Can work in day and night.
• Time Delay: 10sec-7min adjustable, Time-Delay is added continually, when it receives the second induction signals after the first induction, it will compute time once more on the basic of the first time-delay rest.
• Detection Range: 3-7m adjustable, can be adjusted accordingly, item fits for large room.
• Keep Sensor unit 1.6 Mtr higher from the ground level.
• The light, such as incandescent lamp which emits high heat should be kept from the switch aways, or it will be turn on/off voluntarily.
• On being fixed to the wire first time, the switch' initialization will take 1-2 minutes. It's natural for the switch to turn on/off voluntarily.
• When you install the switch on daytime, the Default State of the switch will make the light off.Keep the detector of the switch from illumination, & then the light will turn ON. The darker, the switch will be more sensitive. If it is not very sensitive, turn the yellow port counterclockwise with a long and thin tool to get a proper light sensitivity.
• 1 x Infrared Switch Board
• 1 x Installations Manual
• Bill

• Please check before buying >> Sold and fulfilled by 'Blackt Electrotech'. Warranty is not cover buying from \"Other Sellers\". Original product listed & Sold by Blackt Electrotech's only.
• 18 Months Mfg Warranty from 1 Aug 17.
• Detection Range:360degree/ Rated Load:max.1200W/ Detection Distance: max.6m
• Time Delay:10sec to 7min(adjustable)
• Home
• Office
• Shops
• Hospitals
• Bathroom
• Corridor
• Step
• Parking area & etc
• Load power: Upto 300/1200W Max
• Ambient Light: 3-2000 (Adjuestable)
• Load type: Incandescent lamp, LED light, CLF, fans, etc
• Detecting distance: 0~7M
• Detecting Angle: 360 Degree.
• Installation Height: 2.2-4 Mtr
• Delay: 10 Seconds -7 Minutes (Adjustable), Motion Detection Speed: 0.6~1m/s
• Power Consumption (static) & 0.4(Work)
• Working Humidity: less than 93%RH
• PIR Motion Sensor: Works by detecting human motion infrared rays
• Light Sensor: 3LUX~2000LUX adjustable, Can work in day and night.
• Time Delay: 10sec-7min adjustable, Time-Delay is added continually, when it receives the second induction signals after the first induction, it will compute time once more on the basic of the first time-delay rest.
• Detection Range: 3-7m adjustable, can be adjusted accordingly, item fits for large room.
• Keep Sensor unit 1.6 Mtr higher from the ground level.
• The light, such as incandescent lamp which emits high heat should be kept from the switch aways, or it will be turn on/off voluntarily.
• On being fixed to the wire first time, the switch' initialization will take 1-2 minutes. It's natural for the switch to turn on/off voluntarily.
• When you install the switch on daytime, the Default State of the switch will make the light off.Keep the detector of the switch from illumination, & then the light will turn ON. The darker, the switch will be more sensitive. If it is not very sensitive, turn the yellow port counterclockwise with a long and thin tool to get a proper light sensitivity.
• 1 x Infrared Switch Board
• 1 x Installations Manual
• Bill

• Good solution for energy saving & easy in installation. & Delay adjustment: 10 Seconds - 7 Minutes & Adjustable Lux: turn on the lights during the day or night.
• Using the automatic control product of infrared technology,when people walk into the sensor range,and the sensor can detect the spectral change of the human body infrared ray,during this time,the switch will connect the load automatically until the person leaves the sensor range. 2, Through the photosensitive control , it will not turn on the lights in the daytime or light environment, but also can be adjusted in any lighting environment sensing lights .
• Sensitivity Adjustable: Turn On Lights during Day or nights.
• It can use with lamps, incandescent lamps (bulbs), old-fashioned fluorescent lamps, electronic fluorescent ring lamps, spotlights, transformers, small electrical appliances, and other all other appliance.
• Now switch on/off your lights, bulb, cfl,
• Automatic
• Use infrared pir motion sensor
• Operating volt: ac 220-250v 50hz-60hz.
• Load power: upto 300/1200w max
• Ambient light: 3-2000 (adjuestable)
• Load type: incandescent lamp, led light, clf, fans,
• Detecting distance: 0~7m
• Detecting angle: 360 degree.
• Installtion hight: 2.2-4 mtr
• Motion detetion speed: 0.6~1m/s
• Power cusumption:0.1w (static) & 0.4(work)
• Working humidity: less than 93%rh
• Delay: 10 seconds -7 minutes (adjustable)
• Keep sensor unit 1.6 mtr higher from the ground level.
• The light, such as incandescent lamp which emits high heat should be kept from the switch aways, or it will be turn on/off voluntarily.
• On being fixed to the wire first time, the switch' initialization will take 1-2 minutes. It's natural for the switch to turn on/off voluntarily.
• When you install the switch on daytime, the default state of the switch will make the light off.Keep the detector of the switch from illumination, & then the light will turn on. The darker, the switch will be more sensitive. If it is not very sensitive, turn the yellow port counterclockwise with a long and thin tool to get a proper light sensitivity.

• (2 New Pic pack) Good solution for energy saving & easy in installation. & Delay adjustment: 10 Seconds - 7 Minutes & Adjustable Lux: turn on the lights during the day or night.
• Using the automatic control product of infrared technology,when people walk into the sensor range,and the sensor can detect the spectral change of the human body infrared ray,during this time,the switch will connect the load automatically until the person leaves the sensor range. 2, Through the photosensitive control , it will not turn on the lights in the daytime or light environment, but also can be adjusted in any lighting environment sensing lights .
• Sensitivity Adjustable: Turn On Lights during Day or nights.
• It can use with lamps, incandescent lamps (bulbs), old-fashioned fluorescent lamps, electronic fluorescent ring lamps, spotlights, transformers, small electrical appliances, and other all other appliance.
• Now switch on/off your lights, bulb, cfl
• By automatic
• Use infrared pir motion sensor
• Operating volt: ac 220-250v 50hz-60hz.
• Load power: upto 300/1200w max
• Ambient light: 3-2000 (adjuestable)
• Load type: incandescent lamp, led light, clf, fans, etc
• Detecting distance: 0~7m
• Detecting angle: 360 degree.
• Installtion hight: 2.2-4 mtr
• Motion detetion speed: 0.6~1m/s
• Power cusumption: 0.1w (static) & 0.4(work)
• Working humidity: less than 93%rh
• Delay: 10 seconds -7 minutes (adjustable)
• Keep sensor unit 1.6 mtr higher from the ground level.
• The light, such as incandescent lamp which emits high heat should be kept from the switch aways, or it will be turn on/off voluntarily.
• On being fixed to the wire first time, the switch' initialization will take 1-2 minutes. It's natural for the switch to turn on/off voluntarily.
• When you install the switch on daytime, the default state of the switch will make the light off.Keep the detector of the switch from illumination, & then the light will turn on. The darker, the switch will be more sensitive. If it is not very sensitive, turn the yellow port counterclockwise with a long and thin tool to get a proper light sensitivity

• Optical wireless smoke detector/sensor/alarm unit with 85 db alarm signal
• Faster/safer: Continuous monitoring system
• Fault signal warning (by audio and visual) / no need any assembly or wiring
• Discharged battery indicator/ test button/ 9 volt battery can use. (battery life more than year)
• Low power consumption cmos processing/ special anti- humidity
• Easy to use & Installation.
• Loud Alarm upto 85dB alarm signal.
• Flashing LED indication.
• Color: White
• Test button for easy recommended monthly testing.
• It can install Ceiling or wall
• Choose a suitable area & drill to holes ceiling or wall as the bracket site.
• Put bracket screws & stick the bracket, plug
• Put 9 volt dc battery inside unit & fix unit to the plate.
• Press test button unit working normal or not

• 18 Months Mfg Warranty from 1 Aug 17. Detection angle: 360 and Rated load: 1200Watt
• This microwave motion sensor reflects the latest development in interior lighting technology and provides close to zero energy wastage in terms of lights being on unnecessarily./ HF system : 5.8GHz CW radar,ISM band
• Adjustable Function: Time delay (8 Sec to 12 Min), Sensitivity (1-8m Radii), Light Setting (2-2000 Lux),
• Connection Point : L:- Phase/Line , N - Neutral i.e. (common for Both I/p & O/p) & L':- Load/to light
• Why Microwave motion sensor? Quick response time, Higher accuracy than PIR, Don't affect temperate, wide range, Detect outside glass or other thin material.This microwave motion sensor reflects the latest development in interior lighting technology and provides close to zero energy wastage in terms of lights being on unnecessarily.
• Take down the top cover by turning it anti-clockwise
• Hold base against the wall and mark drill holes, paying attention to any existing wiring in the wall
• Drill the holes, insert wall plug
• Put the power wire and load wire throughthe base holes
• Screw the base into place
• Connect the mains power supply and the load wire to the connection terminal according to connection-wire mark
• Fit glass shad and turn it clockwise

• (5 pic Pack) Warranty:18 Months Manufacture from 1 Aug 17. Warranty Service : Replacement.
• --- New Product: http://www.amazon.in/dp/B074T7Y5PSLOAD--- CAPACITY : 1000 WATTS,WIDE LIGHT SENSOR/ BEST USE for OUTDOOR USAGE
• Light turn on in the dark and turn off on daytime, intelligent sensor, no need to operate by manual.
• Working : As shown in the above diagram out of three wire's Red : Load, Blue : Neutral & Brown : Phase. Connect Red & Blue to Load Application where using (i.e. Lighting) & Brown and Blue to 230 VAC input supply. Now it is ready to operate Day/Night mode. For testing keep torch over to the Photocell load will turn ON.
• Automatic Sensor Light Control Switch/ It can use Street Light, Garden Lights, Incandescent lamp, LED lights. If you have any query fell free to contact us. Blackt Electrotech Official site . www.blackt.in packing is tested before dispatched so that the item reaches to the buyer safely and undamaged.

• Its 2 to 5 business day's gives in available to select pincodes/ control both tank underground tank to overhead tank fully automatically
• Save electricity and easy installation and 12 months warranty +package contains:1 water level controller unit, 6 pic sensors probes (For upper and down tank), 1 user manual with all technical details,
• It can use with suitable up to 2hp motor and suitable for single phase mcb starter panel, submersible motors and jet pumps
• It can use with overhead tank and under ground tanks or overhead tank only
• Dry run protection. Corrosion less sensors. Manual/auto/off modes. In auto mode: ( auto motor on and auto off) . Manual mode: (motor pump will be constantly On). Fully automatic function (manual on and auto off function). It works very long life. Easy to install. Used advanced embedded technology
• Switches on the Pump when the water in the Overhead Tank goes below the Pre-decided minimum level.
• Switch OFF the Pump when the water Level in the Overhead Tank Reaches the Maximum Level therefor Prevents Overflow.
• Switches OFF the pump when the water Level Reaches the Minimum Level in the Under Ground Thank therefor prevents Dry Running.
• Low Maintenance.
• No more overflow or Dry Run thus Saving Water Electricity & Manpower.
• Increase the Pump set life.
• Switch on & OFF automatically.
• No current/Voltage is passed through Water, therefore No Electrolysis Salt Deposition.
• Corrosion less
• Sturdy and durable need not maintain.
• No current/Voltage is passed throughout water level Water, therefore No Electrolysis Salt Deposition.
• Long Life (More than 9 Million Operation)
• Rust Proof
• It can be used in Hard water.
• Controller Unit Size: 2.9 inch(W) x 3.3 inch(H) x 1.9 inch(D)
• Float Switch Sensor: 2 Units
• Installation Brochure

• Both Manual and Remote ON/OFF (With ON LED indication)
• Long Life/Highly durable/ Inbuilt Memory .
• Package Contents: 3 -Piece Remote Switches for 3 Lights & for 1 Fans and Remote
• 12 Months Replacement warranty.
• Relay based Ckt. Humming less Fan Speed. Customer care Mb/Wapp: 9657707702

• Warranty:18 months manufacture from 1 aug 17
• Capacity : 1000 watts,wide light sensor/ best use for outdoor usage
• Light turn on in the dark and turn off on daytime, intelligent sensor, no need to operate by manual
• Working : as shown in the above diagram out of three wire's red : load, blue : neutral and brown : phase. Connect red and blue to load application where using (i.e. Lighting) and brown and blue to 230 vac input supply. Now it is ready to operate day/night mode. For testing keep torch over to the photocell load will turn on
• Automatic sensor light control switch/ it can use street light, garden lights, incandescent lamp, led lights

• What is : (1) it can use 4+1 and 8+2 if you have 2 units (by long pressing 1 and 5 buttons)... (2) warranty increased 18 months (Applicable from 1 Aug 17).... (3)composite pcb... (4)fan speed and heating problem solved
• Made in indian /save electricity/ inbuilt memory/ use for 4 lights and 1 fan/ humming less fan speed/ highly durable/fluctuation less switching for lights/ relay based switching (1000 Watt per pt)
• No need to change existing wiring, it can be install inside or outside switch board (i.e. keep outside only sensor)
• Operate through remote control as well as from your existing switch board buttons manually. Your suggestions is very important to update this product time to time , please leave msg official site or here

• Product Size : 5.5 x4x 2.5 cm Adjustable Function: Time delay (8 Sec to 12 Min), Sensitivity (1-8m Radii), Light Setting (2-2000 Lux)
• 18 Months Mfg Warranty
• Detection angle: 360/ Rated load: 1200Watt/Ideal installation height: 2 - 4 m. This microwave motion sensor reflects the development in interior lighting technology and provides close to zero energy wastage in terms of lights being on unnecessarily./ HF system : 5.8GHz CW radar,ISM band,,,Connection Point : L:- Phase/Line, N - Neutral i.e. (commaon for Both I/p and O/p) and L':- Load/to light
• This microwave motion sensor reflects the development in interior lighting technology and provides close to zero energy wastage in terms of lights being on unnecessarily
• Home
• Office
• Shops
• Hospitals
• Bathroom
• Corridor
• Step
• Parking area & etc
• Operating Volt: AC 220-250V 50Hz-60Hz.
• Load power: Upto 1200W Max
• Ambient Light: 3-2000Lux (Adjuestable)
• Load type: Incandescent lamp, LED light, CFL, fans, etc
• Reach:1-8m(radii.), adjustable, Detecting Angle: 360 Degree.
• HF system: 5.8GHz CW radar,ISM band
• Detecting distance: 0~8M, Installation Height: 2.2-4 Mtr
• transmission power:<10 mW
• Motion Detection Speed: 0.6~1 m/s, Delay: 8 Seconds -12 Minutes (Adjustable)
• Power Consumption (static) & 0.4(Work)
• 1 x Microwave Sensor unit
• 1 x Installations Manual
• 2 x Mounting Screw
• Bill

• It can use with lamps, incandescent lamps (bulbs), old-fashioned fluorescent lamps, electronic fluorescent ring lamps, spotlights, transformers, small electrical appliances, and other all other appliance
• Good solution for energy saving and easy in installation. and Delay adjustment: 10 Seconds - 7 Minutes and Adjustable Lux: turn on the lights during the day or night
• Using the automatic control product of infrared technology,when people walk into the sensor range,and the sensor can detect the spectral change of the human body infrared ray,during this time,the switch will connect the load automatically until the person leaves the sensor range. 2, Through the photosensitive control, it will not turn on the lights in the daytime or light environment, but also can be adjusted in any lighting environment sensing lights
• Sensitivity adjustable: turn on lights during day or nights
• Home
• Office
• Shops
• Hospitals
• Bathroom
• Corridor
• Step
• Parking area & etc
• Operating Volt: AC 220-250V 50Hz-60Hz. Loa
• d power: Upto 300/1200W MaxAmb
• ient Light: 3-2000 (Adjustable)Loa
• d type: Incandescent lamp, LED light, CLF, fans, etcDet
• ecting distance: 0~7M Det
• ecting Angle: 360 Degree, Motion Detection Speed: 0.6~1 m/s Ins
• tallation Height: 2.2-4 Mtr Pow
• er Consumption:0.1W (static) & 0.4(Work)Wor
• king Humidity: less than 93%RHDel
• ay: 10 Seconds -7 Minutes (Adjustable)
• Keep Sensor unit 1.6 Mtr higher from the ground level.
• The light, such as incandescent lamp which emits high heat should be kept from the switch aways, or it will be turn on/off voluntarily.
• On being fixed to the wire first time, the switch' initialization will take 1-2 minutes. It's natural for the switch to turn on/off voluntarily.
• When you install the switch on daytime, the Default State of the switch will make the light off.Keep the detector of the switch from illumination, & then the light will turn ON. The darker, the switch will be more sensitive. If it is not very sensitive, turn the yellow port counterclockwise with a long and thin tool to get a proper light sensitivity.
• 1 x Infrared Switch Board
• 1 x Wall /Ceiling fitting Plate
• 1 x Installations Manual
• 2 x Mounting Screw
• Bill

Popular Categories on BuyBestBrands.in