Home Improvement By Comidox

• Max.sensitivity: 570nm.
• Semi sensitivity angle: +/-60degree.
• Although the device is very sensitive to ambient light, it suppresses the infrared (IR) spectrum, providing a higher visible spectral responsiveness similar to the \"human eye.\"
• It's brand new, good quality & high performance.
• Sensitive to visible light only, no additional filters, good linear output.

• The light control switch module is a novel photoelectric switch designed and manufactured according to the photoelectric conversion characteristics of the semiconductor component. It consists primarily of a sealed CDs photoresistor and integrated circuit.
• At dusk and dawn, the street lights can be automatically turned on and off according to changes in natural light, eliminating the need for manual operation, thereby achieving automatic control of street lamps and energy conservation.
• The circuit is equipped with a delay circuit, which has the anti-interference ability to prevent accidental lightning or manual flashlights, automobiles, and other light-illuminating photo-electric heads, and the false-opening and false-off of the light power supply parts. The delay time is different. , depending on the brightness, usually a few seconds to two or three minutes.
• The internal control is controlled by relays, which are compatible with various loads of resistive, inductive and capacitive lamps. It can load LED lamps, energy-saving lamps, fluorescent lamps, incandescent lamps, exhaust fan lamps, etc. or other electrical equipment.
• Generally installed in the lamp or inside the box, it has the advantages of novel design, reliable installation, small size, light weight, convenient installation, long service life and low price.

• Use advanced super soft silicone wire with a wire length of 70mm and a probe length of 5mm. (1mm=0.0393inch)
• It can test the precision measurement of resistors, capacitors, inductors, etc. It is a partner of inductance and capacitance meter, LCR bridge table and so on. High and low temperature resistant conditions: -10 degree C ~ 40 degree C.
• Multi-purpose test clip is a new type of test tool, suitable for the measurement of precision circuits and micro-electronic components. Especially for the measurement of patch components that are widely used at present, it can fully utilize the convenient function of one-hand operation.
• With a safe pressure rating of 250V, users can confidently use the multi-purpose test pen to operate the multi-function test with one hand.
• CAT II1000V 2A

Popular Categories on BuyBestBrands.in